diff options
| author | Michal Simek <michal.simek@xilinx.com> | 2022-02-23 18:17:39 +0300 |
|---|---|---|
| committer | Michal Simek <michal.simek@xilinx.com> | 2022-03-07 18:33:47 +0300 |
| commit | a3efa53c01100fc1aa015c37a258a50142cca708 (patch) | |
| tree | 897f4c770e79e03b97e49d310b3311232a2738be /arch | |
| parent | 59e1bdd48d059563287a4424f3d6ef9218c49581 (diff) | |
| download | u-boot-a3efa53c01100fc1aa015c37a258a50142cca708.tar.xz | |
arm64: zynqmp: Use assigned-clock-rates for setting up clock in SOM
With limited low level configuration done via psu-init only IPs connected
on SOM are initialized and configured. All IPs connected to carrier card
are not initialized. There is a need to do proper reset, pin configuration
and also clock setting.
The patch targets the last part which is setting up proper clock for USBs
and SDs.
Also setup proper bus width for SD cards.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Link: https://lore.kernel.org/r/d9f80b2551bd246c3d7ecb09b516806c8dc83ed9.1645629459.git.michal.simek@xilinx.com
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/dts/zynqmp-clk-ccf.dtsi | 4 | ||||
| -rw-r--r-- | arch/arm/dts/zynqmp-sck-kv-g-revA.dts | 2 | ||||
| -rw-r--r-- | arch/arm/dts/zynqmp-sck-kv-g-revB.dts | 3 | ||||
| -rw-r--r-- | arch/arm/dts/zynqmp-sm-k26-revA.dts | 1 |
4 files changed, 10 insertions, 0 deletions
diff --git a/arch/arm/dts/zynqmp-clk-ccf.dtsi b/arch/arm/dts/zynqmp-clk-ccf.dtsi index 86b99070c4..7b09d75151 100644 --- a/arch/arm/dts/zynqmp-clk-ccf.dtsi +++ b/arch/arm/dts/zynqmp-clk-ccf.dtsi @@ -215,10 +215,12 @@ &sdhci0 { clocks = <&zynqmp_clk SDIO0_REF>, <&zynqmp_clk LPD_LSBUS>; + assigned-clocks = <&zynqmp_clk SDIO0_REF>; }; &sdhci1 { clocks = <&zynqmp_clk SDIO1_REF>, <&zynqmp_clk LPD_LSBUS>; + assigned-clocks = <&zynqmp_clk SDIO1_REF>; }; &spi0 { @@ -255,10 +257,12 @@ &usb0 { clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>; + assigned-clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>; }; &usb1 { clocks = <&zynqmp_clk USB1_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>; + assigned-clocks = <&zynqmp_clk USB1_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>; }; &watchdog0 { diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts index 34fb592d4f..f58ad69be3 100644 --- a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts +++ b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts @@ -154,6 +154,8 @@ no-1-8-v; disable-wp; xlnx,mio-bank = <1>; + assigned-clock-rates = <187498123>; + bus-width = <8>; }; &gem3 { /* required by spec */ diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts index 35247b0bbd..7236e03a5a 100644 --- a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts +++ b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts @@ -109,6 +109,7 @@ pinctrl-0 = <&pinctrl_usb0_default>; phy-names = "usb3-phy"; phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; + assigned-clock-rates = <250000000>, <20000000>; usb5744: usb-hub { /* u43 */ status = "okay"; @@ -140,6 +141,8 @@ clk-phase-sd-hs = <126>, <60>; clk-phase-uhs-sdr25 = <120>, <60>; clk-phase-uhs-ddr50 = <126>, <48>; + assigned-clock-rates = <187498123>; + bus-width = <8>; }; &gem3 { /* required by spec */ diff --git a/arch/arm/dts/zynqmp-sm-k26-revA.dts b/arch/arm/dts/zynqmp-sm-k26-revA.dts index 5f55df28f3..e9baf4cb41 100644 --- a/arch/arm/dts/zynqmp-sm-k26-revA.dts +++ b/arch/arm/dts/zynqmp-sm-k26-revA.dts @@ -189,6 +189,7 @@ disable-wp; bus-width = <8>; xlnx,mio-bank = <0>; + assigned-clock-rates = <187498123>; }; &spi1 { /* MIO6, 9-11 */ |