Makefile: Rename ALL-y to INPUTS-y

When binman is in use, most of the targets built by the Makefile are
inputs to binman. We then need a final rule to run binman to produce the
final outputs.

Rename the variable to indicate this, and add a new 'inputs' target.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

8 files changed, 31 insertions, 31 deletions

diff --git a/arch/arm/config.mk b/arch/arm/config.mk
index f25603109e..4153f7e371 100644
--- a/arch/arm/config.mk
+++ b/arch/arm/config.mk
@@ -122,7 +122,7 @@ endif
 
 ifneq ($(CONFIG_SPL_BUILD),y)
 # Check that only R_ARM_RELATIVE relocations are generated.
-ALL-y += checkarmreloc
+INPUTS-y += checkarmreloc
 # The movt / movw can hardcode 16 bit parts of the addresses in the
 # instruction. Relocation is not supported for that case, so disable
 # such usage by requiring word relocations.
@@ -154,17 +154,17 @@ endif
 ifneq ($(CONFIG_IMX_CONFIG),)
 ifdef CONFIG_SPL
 ifndef CONFIG_SPL_BUILD
-ALL-y += SPL
+INPUTS-y += SPL
 endif
 else
 ifeq ($(CONFIG_OF_SEPARATE),y)
-ALL-y += u-boot-dtb.imx
+INPUTS-y += u-boot-dtb.imx
 else
-ALL-y += u-boot.imx
+INPUTS-y += u-boot.imx
 endif
 endif
 ifneq ($(CONFIG_VF610),)
-ALL-y += u-boot.vyb
+INPUTS-y += u-boot.vyb
 endif
 endif
 
diff --git a/arch/arm/mach-at91/config.mk b/arch/arm/mach-at91/config.mk
index 9a023efb19..5426394651 100644
--- a/arch/arm/mach-at91/config.mk
+++ b/arch/arm/mach-at91/config.mk
@@ -4,6 +4,6 @@ endif
 
 ifeq ($(CONFIG_CPU_V7A),y)
 ifndef CONFIG_SPL_BUILD
-ALL-y	+= u-boot.img
+INPUTS-y	+= u-boot.img
 endif
 endif
diff --git a/arch/arm/mach-davinci/config.mk b/arch/arm/mach-davinci/config.mk
index 5a33982e2d..4674cae43b 100644
--- a/arch/arm/mach-davinci/config.mk
+++ b/arch/arm/mach-davinci/config.mk
@@ -2,5 +2,5 @@
 #
 # Copyright (C) 2012, Texas Instruments, Incorporated - http://www.ti.com/
 ifndef CONFIG_SPL_BUILD
-ALL-$(CONFIG_SPL_FRAMEWORK)	+= u-boot.ais
+INPUTS-$(CONFIG_SPL_FRAMEWORK)	+= u-boot.ais
 endif
diff --git a/arch/arm/mach-k3/config.mk b/arch/arm/mach-k3/config.mk
index f7afef610c..c9538718e7 100644
--- a/arch/arm/mach-k3/config.mk
+++ b/arch/arm/mach-k3/config.mk
@@ -44,7 +44,7 @@ tiboot3.bin: image_check FORCE
 	$(srctree)/tools/k3_gen_x509_cert.sh -c 16 -b $(obj)/u-boot-spl.bin \
 				-o $@ -l $(CONFIG_SPL_TEXT_BASE) -k $(KEY)
 
-ALL-y	+= tiboot3.bin
+INPUTS-y	+= tiboot3.bin
 endif
 
 ifdef CONFIG_ARM64
@@ -52,10 +52,10 @@ ifdef CONFIG_ARM64
 ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
 SPL_ITS := u-boot-spl-k3_HS.its
 $(SPL_ITS): export IS_HS=1
-ALL-y	+= tispl.bin_HS
+INPUTS-y	+= tispl.bin_HS
 else
 SPL_ITS := u-boot-spl-k3.its
-ALL-y	+= tispl.bin
+INPUTS-y	+= tispl.bin
 endif
 
 quiet_cmd_k3_mkits = MKITS   $@
@@ -70,9 +70,9 @@ endif
 else
 
 ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
-ALL-y	+= u-boot.img_HS
+INPUTS-y	+= u-boot.img_HS
 else
-ALL-y	+= u-boot.img
+INPUTS-y	+= u-boot.img
 endif
 endif
 
diff --git a/arch/arm/mach-keystone/config.mk b/arch/arm/mach-keystone/config.mk
index 5806f8f5d1..5a16891f23 100644
--- a/arch/arm/mach-keystone/config.mk
+++ b/arch/arm/mach-keystone/config.mk
@@ -9,9 +9,9 @@ include  $(srctree)/arch/arm/mach-omap2/config_secure.mk
 
 ifndef CONFIG_SPL_BUILD
 ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
-ALL-y += u-boot_HS_MLO
+INPUTS-y += u-boot_HS_MLO
 else
-ALL-y += MLO
+INPUTS-y += MLO
 endif
 endif
 
diff --git a/arch/arm/mach-omap2/config.mk b/arch/arm/mach-omap2/config.mk
index af455366ed..4f0d2598fa 100644
--- a/arch/arm/mach-omap2/config.mk
+++ b/arch/arm/mach-omap2/config.mk
@@ -18,9 +18,9 @@ ifeq ($(CONFIG_TI_SECURE_DEVICE),y) # Refer to README.ti-secure for more info
 # For booting spl from QSPI or NOR use
 # u-boot-spl_HS_X-LOADER
 ifeq ($(CONFIG_OMAP54XX),y)
-ALL-y += u-boot-spl_HS_MLO
-ALL-y += u-boot-spl_HS_ULO
-ALL-y += u-boot-spl_HS_X-LOADER
+INPUTS-y += u-boot-spl_HS_MLO
+INPUTS-y += u-boot-spl_HS_ULO
+INPUTS-y += u-boot-spl_HS_X-LOADER
 endif
 # On AM43XX:
 #
@@ -30,8 +30,8 @@ endif
 # For booting spl from all other media use
 # u-boot-spl_HS_ISSW
 ifeq ($(CONFIG_AM43XX),y)
-ALL-y += u-boot-spl_HS_SPI_X-LOADER
-ALL-y += u-boot-spl_HS_ISSW
+INPUTS-y += u-boot-spl_HS_SPI_X-LOADER
+INPUTS-y += u-boot-spl_HS_ISSW
 endif
 # On AM33XX:
 #
@@ -47,21 +47,21 @@ endif
 # For booting spl over UART, USB, or Ethernet use
 # u-boot-spl_HS_2ND
 ifeq ($(CONFIG_AM33XX),y)
-ALL-y += u-boot-spl_HS_SPI_X-LOADER
-ALL-y += u-boot-spl_HS_X-LOADER
-ALL-y += u-boot-spl_HS_MLO
-ALL-y += u-boot-spl_HS_2ND
+INPUTS-y += u-boot-spl_HS_SPI_X-LOADER
+INPUTS-y += u-boot-spl_HS_X-LOADER
+INPUTS-y += u-boot-spl_HS_MLO
+INPUTS-y += u-boot-spl_HS_2ND
 endif
 else
-ALL-y += MLO
+INPUTS-y += MLO
 ifeq ($(CONFIG_AM33XX),y)
-ALL-y += MLO.byteswap
+INPUTS-y += MLO.byteswap
 endif
 endif
 else
 ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
-ALL-$(CONFIG_QSPI_BOOT) += u-boot_HS_XIP_X-LOADER
-ALL-$(CONFIG_SPL_LOAD_FIT) += u-boot_HS.img
+INPUTS-$(CONFIG_QSPI_BOOT) += u-boot_HS_XIP_X-LOADER
+INPUTS-$(CONFIG_SPL_LOAD_FIT) += u-boot_HS.img
 endif
-ALL-y += u-boot.img
+INPUTS-y += u-boot.img
 endif
diff --git a/arch/arm/mach-rmobile/Makefile b/arch/arm/mach-rmobile/Makefile
index a3fdcc3bc0..3206bce722 100644
--- a/arch/arm/mach-rmobile/Makefile
+++ b/arch/arm/mach-rmobile/Makefile
@@ -84,5 +84,5 @@ spl/u-boot-spl.scif: spl/u-boot-spl.srec spl/u-boot-spl.bin
 
 # if srec_cat is present build u-boot-spl.scif by default
 has_srec_cat = $(call try-run,srec_cat -VERSion,y,n)
-ALL-$(has_srec_cat) += u-boot-spl.scif
+INPUTS-$(has_srec_cat) += u-boot-spl.scif
 CLEAN_FILES += u-boot-spl.scif
diff --git a/arch/arm/mach-stm32mp/config.mk b/arch/arm/mach-stm32mp/config.mk
index 403af2a225..c30bf482f7 100644
--- a/arch/arm/mach-stm32mp/config.mk
+++ b/arch/arm/mach-stm32mp/config.mk
@@ -4,10 +4,10 @@
 #
 
 ifndef CONFIG_SPL
-ALL-y += u-boot.stm32
+INPUTS-y += u-boot.stm32
 else
 ifdef CONFIG_SPL_BUILD
-ALL-y += u-boot-spl.stm32
+INPUTS-y += u-boot-spl.stm32
 endif
 endif