diff options
author | Tom Rini <trini@konsulko.com> | 2020-05-14 15:44:06 +0300 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2020-05-14 15:44:06 +0300 |
commit | e2b86e23cebc9dfaca2e7b7e53b10fa27d09f4e9 (patch) | |
tree | 0e8b20ee7e4b9426913dc905392386c1c28ee0f2 /arch | |
parent | fe16786149c8f1b2db95ed614a760bc443da6472 (diff) | |
parent | 1b28a5e2b00a9bf3523cc63694baa03f23604619 (diff) | |
download | u-boot-e2b86e23cebc9dfaca2e7b7e53b10fa27d09f4e9.tar.xz |
Merge tag 'u-boot-stm32-20200514' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm
- stm32mp1: migrate MTD and DFU configuration in Kconfig
- stm32mp1: add command stm32prog
- stm32mp1: several board and arch updates
- stm32mp1: activate data cache in SPL and before relocation
- Many improvment for AV96 board and DHCOR SoM
(add new defconfig, DDR3 coding on DHCOR SoM, split between board and SOM
Synchronize DDR setttings on DH SoMs, setting for I2C EEPROM)
- clk: stm32mp1: fix CK_MPU calculation
- DT alignment of stm32mp1 device tree with Linux 5.7-rc2
Diffstat (limited to 'arch')
38 files changed, 4414 insertions, 257 deletions
diff --git a/arch/arm/dts/stm32mp15-ddr.dtsi b/arch/arm/dts/stm32mp15-ddr.dtsi index 8b20b5e173..2a139c54e9 100644 --- a/arch/arm/dts/stm32mp15-ddr.dtsi +++ b/arch/arm/dts/stm32mp15-ddr.dtsi @@ -2,156 +2,240 @@ /* * Copyright : STMicroelectronics 2018 */ +#include <linux/stringify.h> -/ { - soc { - ddr: ddr@5a003000 { - u-boot,dm-pre-reloc; +&ddr { + config-DDR_MEM_COMPATIBLE { + u-boot,dm-pre-reloc; - compatible = "st,stm32mp1-ddr"; + compatible = __stringify(st,DDR_MEM_COMPATIBLE); - reg = <0x5A003000 0x550 - 0x5A004000 0x234>; + st,mem-name = DDR_MEM_NAME; + st,mem-speed = <DDR_MEM_SPEED>; + st,mem-size = <DDR_MEM_SIZE>; - clocks = <&rcc AXIDCG>, - <&rcc DDRC1>, - <&rcc DDRC2>, - <&rcc DDRPHYC>, - <&rcc DDRCAPB>, - <&rcc DDRPHYCAPB>; + st,ctl-reg = < + DDR_MSTR + DDR_MRCTRL0 + DDR_MRCTRL1 + DDR_DERATEEN + DDR_DERATEINT + DDR_PWRCTL + DDR_PWRTMG + DDR_HWLPCTL + DDR_RFSHCTL0 + DDR_RFSHCTL3 + DDR_CRCPARCTL0 + DDR_ZQCTL0 + DDR_DFITMG0 + DDR_DFITMG1 + DDR_DFILPCFG0 + DDR_DFIUPD0 + DDR_DFIUPD1 + DDR_DFIUPD2 + DDR_DFIPHYMSTR + DDR_ODTMAP + DDR_DBG0 + DDR_DBG1 + DDR_DBGCMD + DDR_POISONCFG + DDR_PCCFG + >; - clock-names = "axidcg", - "ddrc1", - "ddrc2", - "ddrphyc", - "ddrcapb", - "ddrphycapb"; + st,ctl-timing = < + DDR_RFSHTMG + DDR_DRAMTMG0 + DDR_DRAMTMG1 + DDR_DRAMTMG2 + DDR_DRAMTMG3 + DDR_DRAMTMG4 + DDR_DRAMTMG5 + DDR_DRAMTMG6 + DDR_DRAMTMG7 + DDR_DRAMTMG8 + DDR_DRAMTMG14 + DDR_ODTCFG + >; - st,mem-name = DDR_MEM_NAME; - st,mem-speed = <DDR_MEM_SPEED>; - st,mem-size = <DDR_MEM_SIZE>; + st,ctl-map = < + DDR_ADDRMAP1 + DDR_ADDRMAP2 + DDR_ADDRMAP3 + DDR_ADDRMAP4 + DDR_ADDRMAP5 + DDR_ADDRMAP6 + DDR_ADDRMAP9 + DDR_ADDRMAP10 + DDR_ADDRMAP11 + >; - st,ctl-reg = < - DDR_MSTR - DDR_MRCTRL0 - DDR_MRCTRL1 - DDR_DERATEEN - DDR_DERATEINT - DDR_PWRCTL - DDR_PWRTMG - DDR_HWLPCTL - DDR_RFSHCTL0 - DDR_RFSHCTL3 - DDR_CRCPARCTL0 - DDR_ZQCTL0 - DDR_DFITMG0 - DDR_DFITMG1 - DDR_DFILPCFG0 - DDR_DFIUPD0 - DDR_DFIUPD1 - DDR_DFIUPD2 - DDR_DFIPHYMSTR - DDR_ODTMAP - DDR_DBG0 - DDR_DBG1 - DDR_DBGCMD - DDR_POISONCFG - DDR_PCCFG - >; + st,ctl-perf = < + DDR_SCHED + DDR_SCHED1 + DDR_PERFHPR1 + DDR_PERFLPR1 + DDR_PERFWR1 + DDR_PCFGR_0 + DDR_PCFGW_0 + DDR_PCFGQOS0_0 + DDR_PCFGQOS1_0 + DDR_PCFGWQOS0_0 + DDR_PCFGWQOS1_0 + DDR_PCFGR_1 + DDR_PCFGW_1 + DDR_PCFGQOS0_1 + DDR_PCFGQOS1_1 + DDR_PCFGWQOS0_1 + DDR_PCFGWQOS1_1 + >; - st,ctl-timing = < - DDR_RFSHTMG - DDR_DRAMTMG0 - DDR_DRAMTMG1 - DDR_DRAMTMG2 - DDR_DRAMTMG3 - DDR_DRAMTMG4 - DDR_DRAMTMG5 - DDR_DRAMTMG6 - DDR_DRAMTMG7 - DDR_DRAMTMG8 - DDR_DRAMTMG14 - DDR_ODTCFG - >; + st,phy-reg = < + DDR_PGCR + DDR_ACIOCR + DDR_DXCCR + DDR_DSGCR + DDR_DCR + DDR_ODTCR + DDR_ZQ0CR1 + DDR_DX0GCR + DDR_DX1GCR + DDR_DX2GCR + DDR_DX3GCR + >; - st,ctl-map = < - DDR_ADDRMAP1 - DDR_ADDRMAP2 - DDR_ADDRMAP3 - DDR_ADDRMAP4 - DDR_ADDRMAP5 - DDR_ADDRMAP6 - DDR_ADDRMAP9 - DDR_ADDRMAP10 - DDR_ADDRMAP11 - >; - - st,ctl-perf = < - DDR_SCHED - DDR_SCHED1 - DDR_PERFHPR1 - DDR_PERFLPR1 - DDR_PERFWR1 - DDR_PCFGR_0 - DDR_PCFGW_0 - DDR_PCFGQOS0_0 - DDR_PCFGQOS1_0 - DDR_PCFGWQOS0_0 - DDR_PCFGWQOS1_0 - DDR_PCFGR_1 - DDR_PCFGW_1 - DDR_PCFGQOS0_1 - DDR_PCFGQOS1_1 - DDR_PCFGWQOS0_1 - DDR_PCFGWQOS1_1 - >; - - st,phy-reg = < - DDR_PGCR - DDR_ACIOCR - DDR_DXCCR - DDR_DSGCR - DDR_DCR - DDR_ODTCR - DDR_ZQ0CR1 - DDR_DX0GCR - DDR_DX1GCR - DDR_DX2GCR - DDR_DX3GCR - >; - - st,phy-timing = < - DDR_PTR0 - DDR_PTR1 - DDR_PTR2 - DDR_DTPR0 - DDR_DTPR1 - DDR_DTPR2 - DDR_MR0 - DDR_MR1 - DDR_MR2 - DDR_MR3 - >; + st,phy-timing = < + DDR_PTR0 + DDR_PTR1 + DDR_PTR2 + DDR_DTPR0 + DDR_DTPR1 + DDR_DTPR2 + DDR_MR0 + DDR_MR1 + DDR_MR2 + DDR_MR3 + >; #ifdef DDR_PHY_CAL_SKIP - st,phy-cal = < - DDR_DX0DLLCR - DDR_DX0DQTR - DDR_DX0DQSTR - DDR_DX1DLLCR - DDR_DX1DQTR - DDR_DX1DQSTR - DDR_DX2DLLCR - DDR_DX2DQTR - DDR_DX2DQSTR - DDR_DX3DLLCR - DDR_DX3DQTR - DDR_DX3DQSTR - >; + st,phy-cal = < + DDR_DX0DLLCR + DDR_DX0DQTR + DDR_DX0DQSTR + DDR_DX1DLLCR + DDR_DX1DQTR + DDR_DX1DQSTR + DDR_DX2DLLCR + DDR_DX2DQTR + DDR_DX2DQSTR + DDR_DX3DLLCR + DDR_DX3DQTR + DDR_DX3DQSTR + >; #endif - status = "okay"; - }; + status = "okay"; }; }; + +#undef DDR_MEM_COMPATIBLE +#undef DDR_MEM_NAME +#undef DDR_MEM_SPEED +#undef DDR_MEM_SIZE + +#undef DDR_MSTR +#undef DDR_MRCTRL0 +#undef DDR_MRCTRL1 +#undef DDR_DERATEEN +#undef DDR_DERATEINT +#undef DDR_PWRCTL +#undef DDR_PWRTMG +#undef DDR_HWLPCTL +#undef DDR_RFSHCTL0 +#undef DDR_RFSHCTL3 +#undef DDR_RFSHTMG +#undef DDR_CRCPARCTL0 +#undef DDR_DRAMTMG0 +#undef DDR_DRAMTMG1 +#undef DDR_DRAMTMG2 +#undef DDR_DRAMTMG3 +#undef DDR_DRAMTMG4 +#undef DDR_DRAMTMG5 +#undef DDR_DRAMTMG6 +#undef DDR_DRAMTMG7 +#undef DDR_DRAMTMG8 +#undef DDR_DRAMTMG14 +#undef DDR_ZQCTL0 +#undef DDR_DFITMG0 +#undef DDR_DFITMG1 +#undef DDR_DFILPCFG0 +#undef DDR_DFIUPD0 +#undef DDR_DFIUPD1 +#undef DDR_DFIUPD2 +#undef DDR_DFIPHYMSTR +#undef DDR_ADDRMAP1 +#undef DDR_ADDRMAP2 +#undef DDR_ADDRMAP3 +#undef DDR_ADDRMAP4 +#undef DDR_ADDRMAP5 +#undef DDR_ADDRMAP6 +#undef DDR_ADDRMAP9 +#undef DDR_ADDRMAP10 +#undef DDR_ADDRMAP11 +#undef DDR_ODTCFG +#undef DDR_ODTMAP +#undef DDR_SCHED +#undef DDR_SCHED1 +#undef DDR_PERFHPR1 +#undef DDR_PERFLPR1 +#undef DDR_PERFWR1 +#undef DDR_DBG0 +#undef DDR_DBG1 +#undef DDR_DBGCMD +#undef DDR_POISONCFG +#undef DDR_PCCFG +#undef DDR_PCFGR_0 +#undef DDR_PCFGW_0 +#undef DDR_PCFGQOS0_0 +#undef DDR_PCFGQOS1_0 +#undef DDR_PCFGWQOS0_0 +#undef DDR_PCFGWQOS1_0 +#undef DDR_PCFGR_1 +#undef DDR_PCFGW_1 +#undef DDR_PCFGQOS0_1 +#undef DDR_PCFGQOS1_1 +#undef DDR_PCFGWQOS0_1 +#undef DDR_PCFGWQOS1_1 +#undef DDR_PGCR +#undef DDR_PTR0 +#undef DDR_PTR1 +#undef DDR_PTR2 +#undef DDR_ACIOCR +#undef DDR_DXCCR +#undef DDR_DSGCR +#undef DDR_DCR +#undef DDR_DTPR0 +#undef DDR_DTPR1 +#undef DDR_DTPR2 +#undef DDR_MR0 +#undef DDR_MR1 +#undef DDR_MR2 +#undef DDR_MR3 +#undef DDR_ODTCR +#undef DDR_ZQ0CR1 +#undef DDR_DX0GCR +#undef DDR_DX0DLLCR +#undef DDR_DX0DQTR +#undef DDR_DX0DQSTR +#undef DDR_DX1GCR +#undef DDR_DX1DLLCR +#undef DDR_DX1DQTR +#undef DDR_DX1DQSTR +#undef DDR_DX2GCR +#undef DDR_DX2DLLCR +#undef DDR_DX2DQTR +#undef DDR_DX2DQSTR +#undef DDR_DX3GCR +#undef DDR_DX3DLLCR +#undef DDR_DX3DQTR +#undef DDR_DX3DQSTR diff --git a/arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi index 11e8f2bef6..b4787c4735 100644 --- a/arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi +++ b/arch/arm/dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi @@ -1,24 +1,23 @@ // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause /* * Copyright (C) 2018, STMicroelectronics - All Rights Reserved + */ + +/* + * File generated by STMicroelectronics STM32CubeMX DDR Tool for MPUs + * DDR type: DDR3 / DDR3L + * DDR width: 16bits + * DDR density: 4Gb + * System frequency: 533000Khz + * Relaxed Timing Mode: false + * Address mapping type: RBC * - * STM32MP157C DK1/DK2 BOARD configuration - * 1x DDR3L 4Gb, 16-bit, 533MHz. - * Reference used NT5CC256M16DP-DI from NANYA - * - * DDR type / Platform DDR3/3L - * freq 533MHz - * width 16 - * datasheet 0 = MT41J256M16-187 / DDR3-1066 bin G - * DDR density 4 - * timing mode optimized - * Scheduling/QoS options : type = 2 - * address mapping : RBC - * Tc > + 85C : N + * Save Date: 2020.02.20, save Time: 18:45:20 */ -#define DDR_MEM_NAME "DDR3-1066/888 bin G 1x4Gb 533MHz v1.45" -#define DDR_MEM_SPEED 533000 -#define DDR_MEM_SIZE 0x20000000 +#define DDR_MEM_COMPATIBLE ddr3-1066-888-bin-g-1x4gb-533mhz +#define DDR_MEM_NAME "DDR3-DDR3L 16bits 533000Khz" +#define DDR_MEM_SPEED 533000 +#define DDR_MEM_SIZE 0x20000000 #define DDR_MSTR 0x00041401 #define DDR_MRCTRL0 0x00000010 @@ -50,15 +49,6 @@ #define DDR_DFIUPD1 0x00000000 #define DDR_DFIUPD2 0x00000000 #define DDR_DFIPHYMSTR 0x00000000 -#define DDR_ADDRMAP1 0x00070707 -#define DDR_ADDRMAP2 0x00000000 -#define DDR_ADDRMAP3 0x1F000000 -#define DDR_ADDRMAP4 0x00001F1F -#define DDR_ADDRMAP5 0x06060606 -#define DDR_ADDRMAP6 0x0F060606 -#define DDR_ADDRMAP9 0x00000000 -#define DDR_ADDRMAP10 0x00000000 -#define DDR_ADDRMAP11 0x00000000 #define DDR_ODTCFG 0x06000600 #define DDR_ODTMAP 0x00000001 #define DDR_SCHED 0x00000C01 @@ -83,6 +73,15 @@ #define DDR_PCFGQOS1_1 0x00800040 #define DDR_PCFGWQOS0_1 0x01100C03 #define DDR_PCFGWQOS1_1 0x01000200 +#define DDR_ADDRMAP1 0x00070707 +#define DDR_ADDRMAP2 0x00000000 +#define DDR_ADDRMAP3 0x1F000000 +#define DDR_ADDRMAP4 0x00001F1F +#define DDR_ADDRMAP5 0x06060606 +#define DDR_ADDRMAP6 0x0F060606 +#define DDR_ADDRMAP9 0x00000000 +#define DDR_ADDRMAP10 0x00000000 +#define DDR_ADDRMAP11 0x00000000 #define DDR_PGCR 0x01442E02 #define DDR_PTR0 0x0022AA5B #define DDR_PTR1 0x04841104 diff --git a/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi index 4b70b60554..dc2875ca08 100644 --- a/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi +++ b/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi @@ -1,24 +1,23 @@ // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause /* * Copyright (C) 2018, STMicroelectronics - All Rights Reserved + */ + +/* + * File generated by STMicroelectronics STM32CubeMX DDR Tool for MPUs + * DDR type: DDR3 / DDR3L + * DDR width: 32bits + * DDR density: 8Gb + * System frequency: 533000Khz + * Relaxed Timing Mode: false + * Address mapping type: RBC * - * STM32MP157C ED1 BOARD configuration - * 2x DDR3L 4Gb each, 16-bit, 533MHz, Single Die Package in flyby topology. - * Reference used NT5CC256M16DP-DI from NANYA - * - * DDR type / Platform DDR3/3L - * freq 533MHz - * width 32 - * datasheet 0 = MT41J256M16-187 / DDR3-1066 bin G - * DDR density 8 - * timing mode optimized - * Scheduling/QoS options : type = 2 - * address mapping : RBC - * Tc > + 85C : N + * Save Date: 2020.02.20, save Time: 18:49:33 */ -#define DDR_MEM_NAME "DDR3-1066/888 bin G 2x4Gb 533MHz v1.45" -#define DDR_MEM_SPEED 533000 -#define DDR_MEM_SIZE 0x40000000 +#define DDR_MEM_COMPATIBLE ddr3-1066-888-bin-g-2x4gb-533mhz +#define DDR_MEM_NAME "DDR3-DDR3L 32bits 533000Khz" +#define DDR_MEM_SPEED 533000 +#define DDR_MEM_SIZE 0x40000000 #define DDR_MSTR 0x00040401 #define DDR_MRCTRL0 0x00000010 @@ -50,15 +49,6 @@ #define DDR_DFIUPD1 0x00000000 #define DDR_DFIUPD2 0x00000000 #define DDR_DFIPHYMSTR 0x00000000 -#define DDR_ADDRMAP1 0x00080808 -#define DDR_ADDRMAP2 0x00000000 -#define DDR_ADDRMAP3 0x00000000 -#define DDR_ADDRMAP4 0x00001F1F -#define DDR_ADDRMAP5 0x07070707 -#define DDR_ADDRMAP6 0x0F070707 -#define DDR_ADDRMAP9 0x00000000 -#define DDR_ADDRMAP10 0x00000000 -#define DDR_ADDRMAP11 0x00000000 #define DDR_ODTCFG 0x06000600 #define DDR_ODTMAP 0x00000001 #define DDR_SCHED 0x00000C01 @@ -83,6 +73,15 @@ #define DDR_PCFGQOS1_1 0x00800040 #define DDR_PCFGWQOS0_1 0x01100C03 #define DDR_PCFGWQOS1_1 0x01000200 +#define DDR_ADDRMAP1 0x00080808 +#define DDR_ADDRMAP2 0x00000000 +#define DDR_ADDRMAP3 0x00000000 +#define DDR_ADDRMAP4 0x00001F1F +#define DDR_ADDRMAP5 0x07070707 +#define DDR_ADDRMAP6 0x0F070707 +#define DDR_ADDRMAP9 0x00000000 +#define DDR_ADDRMAP10 0x00000000 +#define DDR_ADDRMAP11 0x00000000 #define DDR_PGCR 0x01442E02 #define DDR_PTR0 0x0022AA5B #define DDR_PTR1 0x04841104 diff --git a/arch/arm/dts/stm32mp15-ddr3-dhsom-2x1Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-dhsom-2x1Gb-1066-binG.dtsi new file mode 100644 index 0000000000..b3eb280f96 --- /dev/null +++ b/arch/arm/dts/stm32mp15-ddr3-dhsom-2x1Gb-1066-binG.dtsi @@ -0,0 +1,120 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2020, DH electronics - All Rights Reserved + * + * STM32MP15xx DHSOM configuration + * 2x DDR3L 1Gb each, 16-bit, 533MHz, Single Die Package in flyby topology. + * Reference used W631GU6MB15I from Winbond + * + * DDR type / Platform DDR3/3L + * freq 533MHz + * width 32 + * datasheet 0 = W631GU6MB15I / DDR3-1333 + * DDR density 2 + * timing mode optimized + * address mapping : RBC + * Tc > + 85C : J + */ +#define DDR_MEM_COMPATIBLE ddr3l-dhsom-1066-888-bin-g-2x1gb-533mhz +#define DDR_MEM_NAME "DDR3L 32bits 2x1Gb 533MHz" +#define DDR_MEM_SPEED 533000 +#define DDR_MEM_SIZE 0x10000000 + +#define DDR_MSTR 0x00040401 +#define DDR_MRCTRL0 0x00000010 +#define DDR_MRCTRL1 0x00000000 +#define DDR_DERATEEN 0x00000000 +#define DDR_DERATEINT 0x00800000 +#define DDR_PWRCTL 0x00000000 +#define DDR_PWRTMG 0x00400010 +#define DDR_HWLPCTL 0x00000000 +#define DDR_RFSHCTL0 0x00210000 +#define DDR_RFSHCTL3 0x00000000 +#define DDR_RFSHTMG 0x0040008B +#define DDR_CRCPARCTL0 0x00000000 +#define DDR_DRAMTMG0 0x121B1214 +#define DDR_DRAMTMG1 0x000A041C +#define DDR_DRAMTMG2 0x0608090F +#define DDR_DRAMTMG3 0x0050400C +#define DDR_DRAMTMG4 0x08040608 +#define DDR_DRAMTMG5 0x06060403 +#define DDR_DRAMTMG6 0x02020002 +#define DDR_DRAMTMG7 0x00000202 +#define DDR_DRAMTMG8 0x00001005 +#define DDR_DRAMTMG14 0x000000A0 +#define DDR_ZQCTL0 0xC2000040 +#define DDR_DFITMG0 0x02060105 +#define DDR_DFITMG1 0x00000202 +#define DDR_DFILPCFG0 0x07000000 +#define DDR_DFIUPD0 0xC0400003 +#define DDR_DFIUPD1 0x00000000 +#define DDR_DFIUPD2 0x00000000 +#define DDR_DFIPHYMSTR 0x00000000 +#define DDR_ODTCFG 0x06000600 +#define DDR_ODTMAP 0x00000001 +#define DDR_SCHED 0x00000C01 +#define DDR_SCHED1 0x00000000 +#define DDR_PERFHPR1 0x01000001 +#define DDR_PERFLPR1 0x08000200 +#define DDR_PERFWR1 0x08000400 +#define DDR_DBG0 0x00000000 +#define DDR_DBG1 0x00000000 +#define DDR_DBGCMD 0x00000000 +#define DDR_POISONCFG 0x00000000 +#define DDR_PCCFG 0x00000010 +#define DDR_PCFGR_0 0x00010000 +#define DDR_PCFGW_0 0x00000000 +#define DDR_PCFGQOS0_0 0x02100C03 +#define DDR_PCFGQOS1_0 0x00800100 +#define DDR_PCFGWQOS0_0 0x01100C03 +#define DDR_PCFGWQOS1_0 0x01000200 +#define DDR_PCFGR_1 0x00010000 +#define DDR_PCFGW_1 0x00000000 +#define DDR_PCFGQOS0_1 0x02100C03 +#define DDR_PCFGQOS1_1 0x00800040 +#define DDR_PCFGWQOS0_1 0x01100C03 +#define DDR_PCFGWQOS1_1 0x01000200 +#define DDR_ADDRMAP1 0x00080808 +#define DDR_ADDRMAP2 0x00000000 +#define DDR_ADDRMAP3 0x00000000 +#define DDR_ADDRMAP4 0x00001F1F +#define DDR_ADDRMAP5 0x07070707 +#define DDR_ADDRMAP6 0x0F0F0F07 +#define DDR_ADDRMAP9 0x00000000 +#define DDR_ADDRMAP10 0x00000000 +#define DDR_ADDRMAP11 0x00000000 +#define DDR_PGCR 0x01442E02 +#define DDR_PTR0 0x0022AA5B +#define DDR_PTR1 0x04841104 +#define DDR_PTR2 0x042DA068 +#define DDR_ACIOCR 0x10400812 +#define DDR_DXCCR 0x00000C40 +#define DDR_DSGCR 0xF200011F +#define DDR_DCR 0x0000000B +#define DDR_DTPR0 0x38D488D0 +#define DDR_DTPR1 0x098B00D8 +#define DDR_DTPR2 0x10023600 +#define DDR_MR0 0x00000840 +#define DDR_MR1 0x00000000 +#define DDR_MR2 0x00000248 +#define DDR_MR3 0x00000000 +#define DDR_ODTCR 0x00010000 +#define DDR_ZQ0CR1 0x00000038 +#define DDR_DX0GCR 0x0000CE81 +#define DDR_DX0DLLCR 0x40000000 +#define DDR_DX0DQTR 0xFFFFFFFF +#define DDR_DX0DQSTR 0x3DB02000 +#define DDR_DX1GCR 0x0000CE81 +#define DDR_DX1DLLCR 0x40000000 +#define DDR_DX1DQTR 0xFFFFFFFF +#define DDR_DX1DQSTR 0x3DB02000 +#define DDR_DX2GCR 0x0000CE81 +#define DDR_DX2DLLCR 0x40000000 +#define DDR_DX2DQTR 0xFFFFFFFF +#define DDR_DX2DQSTR 0x3DB02000 +#define DDR_DX3GCR 0x0000CE81 +#define DDR_DX3DLLCR 0x40000000 +#define DDR_DX3DQTR 0xFFFFFFFF +#define DDR_DX3DQSTR 0x3DB02000 + +#include "stm32mp15-ddr.dtsi" diff --git a/arch/arm/dts/stm32mp15-ddr3-dhsom-2x2Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-dhsom-2x2Gb-1066-binG.dtsi new file mode 100644 index 0000000000..ed3a5248f8 --- /dev/null +++ b/arch/arm/dts/stm32mp15-ddr3-dhsom-2x2Gb-1066-binG.dtsi @@ -0,0 +1,120 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2020, DH electronics - All Rights Reserved + * + * STM32MP15xx DHSOM configuration + * 2x DDR3L 2Gb each, 16-bit, 533MHz, Single Die Package in flyby topology. + * Reference used W632GU6NB15I from Winbond + * + * DDR type / Platform DDR3/3L + * freq 533MHz + * width 32 + * datasheet 0 = W632GU6NB15I / DDR3-1333 + * DDR density 4 + * timing mode optimized + * address mapping : RBC + * Tc > + 85C : J + */ +#define DDR_MEM_COMPATIBLE ddr3l-dhsom-1066-888-bin-g-2x2gb-533mhz +#define DDR_MEM_NAME "DDR3L 32bits 2x2Gb 533MHz" +#define DDR_MEM_SPEED 533000 +#define DDR_MEM_SIZE 0x20000000 + +#define DDR_MSTR 0x00040401 +#define DDR_MRCTRL0 0x00000010 +#define DDR_MRCTRL1 0x00000000 +#define DDR_DERATEEN 0x00000000 +#define DDR_DERATEINT 0x00800000 +#define DDR_PWRCTL 0x00000000 +#define DDR_PWRTMG 0x00400010 +#define DDR_HWLPCTL 0x00000000 +#define DDR_RFSHCTL0 0x00210000 +#define DDR_RFSHCTL3 0x00000000 +#define DDR_RFSHTMG 0x0040008B +#define DDR_CRCPARCTL0 0x00000000 +#define DDR_DRAMTMG0 0x121B1214 +#define DDR_DRAMTMG1 0x000A041C +#define DDR_DRAMTMG2 0x0608090F +#define DDR_DRAMTMG3 0x0050400C +#define DDR_DRAMTMG4 0x08040608 +#define DDR_DRAMTMG5 0x06060403 +#define DDR_DRAMTMG6 0x02020002 +#define DDR_DRAMTMG7 0x00000202 +#define DDR_DRAMTMG8 0x00001005 +#define DDR_DRAMTMG14 0x000000A0 +#define DDR_ZQCTL0 0xC2000040 +#define DDR_DFITMG0 0x02060105 +#define DDR_DFITMG1 0x00000202 +#define DDR_DFILPCFG0 0x07000000 +#define DDR_DFIUPD0 0xC0400003 +#define DDR_DFIUPD1 0x00000000 +#define DDR_DFIUPD2 0x00000000 +#define DDR_DFIPHYMSTR 0x00000000 +#define DDR_ODTCFG 0x06000600 +#define DDR_ODTMAP 0x00000001 +#define DDR_SCHED 0x00000C01 +#define DDR_SCHED1 0x00000000 +#define DDR_PERFHPR1 0x01000001 +#define DDR_PERFLPR1 0x08000200 +#define DDR_PERFWR1 0x08000400 +#define DDR_DBG0 0x00000000 +#define DDR_DBG1 0x00000000 +#define DDR_DBGCMD 0x00000000 +#define DDR_POISONCFG 0x00000000 +#define DDR_PCCFG 0x00000010 +#define DDR_PCFGR_0 0x00010000 +#define DDR_PCFGW_0 0x00000000 +#define DDR_PCFGQOS0_0 0x02100C03 +#define DDR_PCFGQOS1_0 0x00800100 +#define DDR_PCFGWQOS0_0 0x01100C03 +#define DDR_PCFGWQOS1_0 0x01000200 +#define DDR_PCFGR_1 0x00010000 +#define DDR_PCFGW_1 0x00000000 +#define DDR_PCFGQOS0_1 0x02100C03 +#define DDR_PCFGQOS1_1 0x00800040 +#define DDR_PCFGWQOS0_1 0x01100C03 +#define DDR_PCFGWQOS1_1 0x01000200 +#define DDR_ADDRMAP1 0x00080808 +#define DDR_ADDRMAP2 0x00000000 +#define DDR_ADDRMAP3 0x00000000 +#define DDR_ADDRMAP4 0x00001F1F +#define DDR_ADDRMAP5 0x07070707 +#define DDR_ADDRMAP6 0x0F0F0707 +#define DDR_ADDRMAP9 0x00000000 +#define DDR_ADDRMAP10 0x00000000 +#define DDR_ADDRMAP11 0x00000000 +#define DDR_PGCR 0x01442E02 +#define DDR_PTR0 0x0022AA5B +#define DDR_PTR1 0x04841104 +#define DDR_PTR2 0x042DA068 +#define DDR_ACIOCR 0x10400812 +#define DDR_DXCCR 0x00000C40 +#define DDR_DSGCR 0xF200011F +#define DDR_DCR 0x0000000B +#define DDR_DTPR0 0x38D488D0 +#define DDR_DTPR1 0x098B00D8 +#define DDR_DTPR2 0x10023600 +#define DDR_MR0 0x00000840 +#define DDR_MR1 0x00000000 +#define DDR_MR2 0x00000248 +#define DDR_MR3 0x00000000 +#define DDR_ODTCR 0x00010000 +#define DDR_ZQ0CR1 0x00000038 +#define DDR_DX0GCR 0x0000CE81 +#define DDR_DX0DLLCR 0x40000000 +#define DDR_DX0DQTR 0xFFFFFFFF +#define DDR_DX0DQSTR 0x3DB02000 +#define DDR_DX1GCR 0x0000CE81 +#define DDR_DX1DLLCR 0x40000000 +#define DDR_DX1DQTR 0xFFFFFFFF +#define DDR_DX1DQSTR 0x3DB02000 +#define DDR_DX2GCR 0x0000CE81 +#define DDR_DX2DLLCR 0x40000000 +#define DDR_DX2DQTR 0xFFFFFFFF +#define DDR_DX2DQSTR 0x3DB02000 +#define DDR_DX3GCR 0x0000CE81 +#define DDR_DX3DLLCR 0x40000000 +#define DDR_DX3DQTR 0xFFFFFFFF +#define DDR_DX3DQSTR 0x3DB02000 + +#include "stm32mp15-ddr.dtsi" diff --git a/arch/arm/dts/stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi new file mode 100644 index 0000000000..d5813d64b0 --- /dev/null +++ b/arch/arm/dts/stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi @@ -0,0 +1,120 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2020, DH electronics - All Rights Reserved + * + * STM32MP15xx DHSOM configuration + * 2x DDR3L 4Gb each, 16-bit, 533MHz, Single Die Package in flyby topology. + * Reference used W634GU6NB15I from Winbond + * + * DDR type / Platform DDR3/3L + * freq 533MHz + * width 32 + * datasheet 0 = W634GU6NB15I / DDR3-1333 + * DDR density 8 + * timing mode optimized + * address mapping : RBC + * Tc > + 85C : J + */ +#define DDR_MEM_COMPATIBLE ddr3l-dhsom-1066-888-bin-g-2x4gb-533mhz +#define DDR_MEM_NAME "DDR3L 32bits 2x4Gb 533MHz" +#define DDR_MEM_SPEED 533000 +#define DDR_MEM_SIZE 0x40000000 + +#define DDR_MSTR 0x00040401 +#define DDR_MRCTRL0 0x00000010 +#define DDR_MRCTRL1 0x00000000 +#define DDR_DERATEEN 0x00000000 +#define DDR_DERATEINT 0x00800000 +#define DDR_PWRCTL 0x00000000 +#define DDR_PWRTMG 0x00400010 +#define DDR_HWLPCTL 0x00000000 +#define DDR_RFSHCTL0 0x00210000 +#define DDR_RFSHCTL3 0x00000000 +#define DDR_RFSHTMG 0x0040008B +#define DDR_CRCPARCTL0 0x00000000 +#define DDR_DRAMTMG0 0x121B1214 +#define DDR_DRAMTMG1 0x000A041C +#define DDR_DRAMTMG2 0x0608090F +#define DDR_DRAMTMG3 0x0050400C +#define DDR_DRAMTMG4 0x08040608 +#define DDR_DRAMTMG5 0x06060403 +#define DDR_DRAMTMG6 0x02020002 +#define DDR_DRAMTMG7 0x00000202 +#define DDR_DRAMTMG8 0x00001005 +#define DDR_DRAMTMG14 0x000000A0 +#define DDR_ZQCTL0 0xC2000040 +#define DDR_DFITMG0 0x02060105 +#define DDR_DFITMG1 0x00000202 +#define DDR_DFILPCFG0 0x07000000 +#define DDR_DFIUPD0 0xC0400003 +#define DDR_DFIUPD1 0x00000000 +#define DDR_DFIUPD2 0x00000000 +#define DDR_DFIPHYMSTR 0x00000000 +#define DDR_ODTCFG 0x06000600 +#define DDR_ODTMAP 0x00000001 +#define DDR_SCHED 0x00000C01 +#define DDR_SCHED1 0x00000000 +#define DDR_PERFHPR1 0x01000001 +#define DDR_PERFLPR1 0x08000200 +#define DDR_PERFWR1 0x08000400 +#define DDR_DBG0 0x00000000 +#define DDR_DBG1 0x00000000 +#define DDR_DBGCMD 0x00000000 +#define DDR_POISONCFG 0x00000000 +#define DDR_PCCFG 0x00000010 +#define DDR_PCFGR_0 0x00010000 +#define DDR_PCFGW_0 0x00000000 +#define DDR_PCFGQOS0_0 0x02100C03 +#define DDR_PCFGQOS1_0 0x00800100 +#define DDR_PCFGWQOS0_0 0x01100C03 +#define DDR_PCFGWQOS1_0 0x01000200 +#define DDR_PCFGR_1 0x00010000 +#define DDR_PCFGW_1 0x00000000 +#define DDR_PCFGQOS0_1 0x02100C03 +#define DDR_PCFGQOS1_1 0x00800040 +#define DDR_PCFGWQOS0_1 0x01100C03 +#define DDR_PCFGWQOS1_1 0x01000200 +#define DDR_ADDRMAP1 0x00080808 +#define DDR_ADDRMAP2 0x00000000 +#define DDR_ADDRMAP3 0x00000000 +#define DDR_ADDRMAP4 0x00001F1F +#define DDR_ADDRMAP5 0x07070707 +#define DDR_ADDRMAP6 0x0F070707 +#define DDR_ADDRMAP9 0x00000000 +#define DDR_ADDRMAP10 0x00000000 +#define DDR_ADDRMAP11 0x00000000 +#define DDR_PGCR 0x01442E02 +#define DDR_PTR0 0x0022AA5B +#define DDR_PTR1 0x04841104 +#define DDR_PTR2 0x042DA068 +#define DDR_ACIOCR 0x10400812 +#define DDR_DXCCR 0x00000C40 +#define DDR_DSGCR 0xF200011F +#define DDR_DCR 0x0000000B +#define DDR_DTPR0 0x38D488D0 +#define DDR_DTPR1 0x098B00D8 +#define DDR_DTPR2 0x10023600 +#define DDR_MR0 0x00000840 +#define DDR_MR1 0x00000000 +#define DDR_MR2 0x00000248 +#define DDR_MR3 0x00000000 +#define DDR_ODTCR 0x00010000 +#define DDR_ZQ0CR1 0x00000038 +#define DDR_DX0GCR 0x0000CE81 +#define DDR_DX0DLLCR 0x40000000 +#define DDR_DX0DQTR 0xFFFFFFFF +#define DDR_DX0DQSTR 0x3DB02000 +#define DDR_DX1GCR 0x0000CE81 +#define DDR_DX1DLLCR 0x40000000 +#define DDR_DX1DQTR 0xFFFFFFFF +#define DDR_DX1DQSTR 0x3DB02000 +#define DDR_DX2GCR 0x0000CE81 +#define DDR_DX2DLLCR 0x40000000 +#define DDR_DX2DQTR 0xFFFFFFFF +#define DDR_DX2DQSTR 0x3DB02000 +#define DDR_DX3GCR 0x0000CE81 +#define DDR_DX3DLLCR 0x40000000 +#define DDR_DX3DQTR 0xFFFFFFFF +#define DDR_DX3DQSTR 0x3DB02000 + +#include "stm32mp15-ddr.dtsi" diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp15-pinctrl.dtsi index 29acdc4afd..8d00391978 100644 --- a/arch/arm/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi @@ -213,6 +213,40 @@ }; }; + ethernet0_rmii_pins_a: rmii-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('A', 1, AF0)>, /* ETH1_RMII_REF_CLK */ + <STM32_PINMUX('A', 2, AF11)>, /* ETH1_MDIO */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH1_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */ + bias-disable; + }; + }; + + ethernet0_rmii_pins_sleep_a: rmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH1_MDIO */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH1_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */ + }; + }; + fmc_pins_a: fmc-0 { pins1 { pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */ @@ -736,6 +770,25 @@ }; }; + sai2a_pins_b: sai2a-2 { + pins1 { + pinmux = <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */ + <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */ + <STM32_PINMUX('D', 13, AF10)>; /* SAI2_SCK_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + sai2a_sleep_pins_b: sai2a-sleep-3 { + pins { + pinmux = <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */ + <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */ + <STM32_PINMUX('D', 13, ANALOG)>; /* SAI2_SCK_A */ + }; + }; + sai2b_pins_a: sai2b-0 { pins1 { pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */ @@ -1118,6 +1171,19 @@ }; }; + usart3_pins_a: usart3-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */ + bias-disable; + }; + }; + uart4_pins_a: uart4-0 { pins1 { pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */ @@ -1158,6 +1224,32 @@ bias-disable; }; }; + + uart8_pins_a: uart8-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 0, AF8)>; /* UART8_RX */ + bias-disable; + }; + }; + + usbotg_hs_pins_a: usbotg-hs-0 { + pins { + pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */ + }; + }; + + usbotg_fs_dp_dm_pins_a: usbotg-fs-dp-dm-0 { + pins { + pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* OTG_FS_DM */ + <STM32_PINMUX('A', 12, ANALOG)>; /* OTG_FS_DP */ + }; + }; }; &pinctrl_z { diff --git a/arch/arm/dts/stm32mp15-u-boot.dtsi b/arch/arm/dts/stm32mp15-u-boot.dtsi index 8f9535a4db..1279589a56 100644 --- a/arch/arm/dts/stm32mp15-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15-u-boot.dtsi @@ -36,6 +36,31 @@ soc { u-boot,dm-pre-reloc; + + ddr: ddr@5a003000 { + u-boot,dm-pre-reloc; + + compatible = "st,stm32mp1-ddr"; + + reg = <0x5A003000 0x550 + 0x5A004000 0x234>; + + clocks = <&rcc AXIDCG>, + <&rcc DDRC1>, + <&rcc DDRC2>, + <&rcc DDRPHYC>, + <&rcc DDRCAPB>, + <&rcc DDRPHYCAPB>; + + clock-names = "axidcg", + "ddrc1", + "ddrc2", + "ddrphyc", + "ddrcapb", + "ddrphycapb"; + + status = "okay"; + }; }; }; diff --git a/arch/arm/dts/stm32mp151.dtsi b/arch/arm/dts/stm32mp151.dtsi index f185639a46..75d2c0d296 100644 --- a/arch/arm/dts/stm32mp151.dtsi +++ b/arch/arm/dts/stm32mp151.dtsi @@ -17,6 +17,7 @@ cpu0: cpu@0 { compatible = "arm,cortex-a7"; + clock-frequency = <650000000>; device_type = "cpu"; reg = <0>; }; @@ -490,6 +491,7 @@ resets = <&rcc I2C1_R>; #address-cells = <1>; #size-cells = <0>; + wakeup-source; status = "disabled"; }; @@ -503,6 +505,7 @@ resets = <&rcc I2C2_R>; #address-cells = <1>; #size-cells = <0>; + wakeup-source; status = "disabled"; }; @@ -516,6 +519,7 @@ resets = <&rcc I2C3_R>; #address-cells = <1>; #size-cells = <0>; + wakeup-source; status = "disabled"; }; @@ -529,6 +533,7 @@ resets = <&rcc I2C5_R>; #address-cells = <1>; #size-cells = <0>; + wakeup-source; status = "disabled"; }; @@ -966,6 +971,7 @@ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc DMA1>; + resets = <&rcc DMA1_R>; #dma-cells = <4>; st,mem2mem; dma-requests = <8>; @@ -983,6 +989,7 @@ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc DMA2>; + resets = <&rcc DMA2_R>; #dma-cells = <4>; st,mem2mem; dma-requests = <8>; @@ -996,6 +1003,7 @@ dma-masters = <&dma1 &dma2>; dma-channels = <16>; clocks = <&rcc DMAMUX>; + resets = <&rcc DMAMUX_R>; }; adc: adc@48003000 { @@ -1051,7 +1059,7 @@ }; usbotg_hs: usb-otg@49000000 { - compatible = "snps,dwc2"; + compatible = "st,stm32mp15-hsotg", "snps,dwc2"; reg = <0x49000000 0x10000>; clocks = <&rcc USBO_K>; clock-names = "otg"; @@ -1296,6 +1304,7 @@ reg = <0x58000000 0x1000>; interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc MDMA>; + resets = <&rcc MDMA_R>; #dma-cells = <5>; dma-channels = <32>; dma-requests = <48>; @@ -1495,6 +1504,7 @@ resets = <&rcc I2C4_R>; #address-cells = <1>; #size-cells = <0>; + wakeup-source; status = "disabled"; }; @@ -1530,6 +1540,7 @@ resets = <&rcc I2C6_R>; #address-cells = <1>; #size-cells = <0>; + wakeup-source; status = "disabled"; }; diff --git a/arch/arm/dts/stm32mp153.dtsi b/arch/arm/dts/stm32mp153.dtsi index 2d759fc601..6d9ab08667 100644 --- a/arch/arm/dts/stm32mp153.dtsi +++ b/arch/arm/dts/stm32mp153.dtsi @@ -10,6 +10,7 @@ cpus { cpu1: cpu@1 { compatible = "arm,cortex-a7"; + clock-frequency = <650000000>; device_type = "cpu"; reg = <1>; }; diff --git a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi index 5844d41c53..c52abeb1e7 100644 --- a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi @@ -27,10 +27,6 @@ default-state = "off"; status = "okay"; }; - - blue { - default-state = "on"; - }; }; }; diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi index ed2f024be9..84af7fa47b 100644 --- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi @@ -28,10 +28,6 @@ default-state = "off"; status = "okay"; }; - - blue { - default-state = "on"; - }; }; }; diff --git a/arch/arm/dts/stm32mp157c-ed1.dts b/arch/arm/dts/stm32mp157c-ed1.dts index 54af7c97b3..4fb71100f5 100644 --- a/arch/arm/dts/stm32mp157c-ed1.dts +++ b/arch/arm/dts/stm32mp157c-ed1.dts @@ -70,6 +70,11 @@ reg = <0xe8000000 0x8000000>; no-map; }; + + optee@fe000000 { + reg = <0xfe000000 0x02000000>; + no-map; + }; }; aliases { @@ -130,10 +135,12 @@ }; &i2c4 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c4_pins_a>; + pinctrl-1 = <&i2c4_pins_sleep_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; + clock-frequency = <400000>; status = "okay"; /* spare dmas for other usage */ /delete-property/dmas; @@ -218,8 +225,6 @@ vdd_usb: ldo4 { regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; interrupts = <IT_CURLIM_LDO4 0>; }; @@ -241,7 +246,6 @@ vref_ddr: vref_ddr { regulator-name = "vref_ddr"; regulator-always-on; - regulator-over-current-protection; }; bst_out: boost { @@ -313,7 +317,8 @@ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>; pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>; - broken-cd; + cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; st,sig-dir; st,neg-edge; st,use-ckin; @@ -334,7 +339,7 @@ st,neg-edge; bus-width = <8>; vmmc-supply = <&v3v3>; - vqmmc-supply = <&v3v3>; + vqmmc-supply = <&vdd>; mmc-ddr-3_3v; status = "okay"; }; diff --git a/arch/arm/dts/stm32mp157c-ev1.dts b/arch/arm/dts/stm32mp157c-ev1.dts index 228e35e168..8a4c7ff31a 100644 --- a/arch/arm/dts/stm32mp157c-ev1.dts +++ b/arch/arm/dts/stm32mp157c-ev1.dts @@ -174,8 +174,9 @@ }; &i2c2 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c2_pins_a>; + pinctrl-1 = <&i2c2_pins_sleep_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; status = "okay"; @@ -210,7 +211,7 @@ interrupt-parent = <&gpioi>; vdd-supply = <&v3v3>; - stmfx_pinctrl: stmfx-pin-controller { + stmfx_pinctrl: pinctrl { compatible = "st,stmfx-0300-pinctrl"; gpio-controller; #gpio-cells = <2>; @@ -218,7 +219,7 @@ #interrupt-cells = <2>; gpio-ranges = <&stmfx_pinctrl 0 0 24>; - joystick_pins: joystick { + joystick_pins: joystick-pins { pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; bias-pull-down; }; @@ -227,8 +228,9 @@ }; &i2c5 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c5_pins_a>; + pinctrl-1 = <&i2c5_pins_sleep_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; status = "okay"; @@ -353,7 +355,8 @@ }; &usbotg_hs { - dr_mode = "peripheral"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; phys = <&usbphyc_port1 0>; phy-names = "usb2-phy"; status = "okay"; diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi index b57f3d520c..75d75266e8 100644 --- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi @@ -5,7 +5,9 @@ #include <dt-bindings/clock/stm32mp1-clksrc.h> #include "stm32mp15-u-boot.dtsi" -#include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi" +#include "stm32mp15-ddr3-dhsom-2x1Gb-1066-binG.dtsi" +#include "stm32mp15-ddr3-dhsom-2x2Gb-1066-binG.dtsi" +#include "stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi" / { aliases { @@ -23,6 +25,8 @@ u-boot,error-led = "error"; st,fastboot-gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; st,stm32prog-gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; + dh,som-coding-gpios = <&gpiof 12 0>, <&gpiof 13 0>, <&gpiof 15 0>; + dh,ddr3-coding-gpios = <&gpioz 6 0>, <&gpioz 7 0>; }; led { @@ -45,6 +49,15 @@ }; }; +&gpiof { + snor-nwp { + gpio-hog; + gpios = <7 0>; + output-high; + line-name = "spi-nor-nwp"; + }; +}; + &i2c4 { u-boot,dm-pre-reloc; }; diff --git a/arch/arm/dts/stm32mp15xx-dhcom.dtsi b/arch/arm/dts/stm32mp15xx-dhcom.dtsi index d8a255b9c6..b3f4cb4515 100644 --- a/arch/arm/dts/stm32mp15xx-dhcom.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcom.dtsi @@ -269,7 +269,8 @@ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>; pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>; - broken-cd; + cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; st,sig-dir; st,neg-edge; st,use-ckin; diff --git a/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi index 3f82f20705..cb92fc9c14 100644 --- a/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi @@ -15,6 +15,7 @@ config { u-boot,boot-led = "led1"; u-boot,error-led = "led4"; + dh,board-coding-gpios = <&gpiog 13 0>, <&gpiod 9 0>; }; }; diff --git a/arch/arm/dts/stm32mp15xx-dhcor-avenger96.dts b/arch/arm/dts/stm32mp15xx-dhcor-avenger96.dts index a600677563..1b0579c8ab 100644 --- a/arch/arm/dts/stm32mp15xx-dhcor-avenger96.dts +++ b/arch/arm/dts/stm32mp15xx-dhcor-avenger96.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "stm32mp15xx-dhcor.dtsi" +#include "stm32mp15xx-dhcor-io1v8.dtsi" #include "stm32mp15xx-dhcor-avenger96-u-boot.dtsi" / { diff --git a/arch/arm/dts/stm32mp15xx-dhcor-io1v8.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-io1v8.dtsi new file mode 100644 index 0000000000..75435424d6 --- /dev/null +++ b/arch/arm/dts/stm32mp15xx-dhcor-io1v8.dtsi @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +/* + * Copyright (C) 2020 Marek Vasut <marex@denx.de> + */ + +#include "stm32mp15xx-dhcor-io3v3.dtsi" + +/ { + /* Enpirion EP3A8LQI U2 on the 1V8 IO DHCOR */ + vdd_io: regulator-buck-io { + compatible = "regulator-fixed"; + regulator-name = "buck-io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd>; + }; +}; + +&pwr_regulators { + vdd-supply = <&vdd_io>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; diff --git a/arch/arm/dts/stm32mp15xx-dhcor.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-io3v3.dtsi index 97d370e119..64299df816 100644 --- a/arch/arm/dts/stm32mp15xx-dhcor.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcor-io3v3.dtsi @@ -21,17 +21,6 @@ device_type = "memory"; reg = <0xc0000000 0x40000000>; }; - - /* Enpirion EP3A8LQI U2 on the DHCOR */ - vdd_io: regulator-buck-io { - compatible = "regulator-fixed"; - regulator-name = "buck-io"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vdd>; - }; }; &i2c4 { @@ -51,10 +40,6 @@ #interrupt-cells = <2>; status = "okay"; - st,main-control-register = <0x04>; - st,vin-control-register = <0xc0>; - st,usb-control-register = <0x30>; - regulators { compatible = "st,stpmic1-regulators"; @@ -89,7 +74,6 @@ regulator-min-microvolt = <2900000>; regulator-max-microvolt = <2900000>; regulator-always-on; - st,mask_reset; regulator-initial-mode = <0>; regulator-over-current-protection; }; @@ -129,8 +113,6 @@ vdd_usb: ldo4 { regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; interrupts = <IT_CURLIM_LDO4 0>; interrupt-parent = <&pmic>; }; @@ -156,7 +138,6 @@ vref_ddr: vref_ddr { regulator-name = "vref_ddr"; regulator-always-on; - regulator-over-current-protection; }; bst_out: boost { @@ -200,7 +181,7 @@ }; &pwr_regulators { - vdd-supply = <&vdd_io>; + vdd-supply = <&vdd>; vdd_3v3_usbfs-supply = <&vdd_usb>; }; diff --git a/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi index 5de7b87b9a..ef730a8322 100644 --- a/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi @@ -9,7 +9,17 @@ #include <dt-bindings/clock/stm32mp1-clksrc.h> #include "stm32mp15-u-boot.dtsi" -#include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi" +#include "stm32mp15-ddr3-dhsom-2x1Gb-1066-binG.dtsi" +#include "stm32mp15-ddr3-dhsom-2x2Gb-1066-binG.dtsi" +#include "stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi" + +/ { + u-boot,dm-pre-reloc; + config { + dh,ddr3-coding-gpios = <&gpiog 0 0>, <&gpiog 1 0>; + dh,som-coding-gpios = <&gpioz 7 0>, <&gpiof 3 0>; + }; +}; &i2c4 { u-boot,dm-pre-reloc; diff --git a/arch/arm/dts/stm32mp15xx-dkx.dtsi b/arch/arm/dts/stm32mp15xx-dkx.dtsi index 42d3f0cb2d..812e370ee4 100644 --- a/arch/arm/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/dts/stm32mp15xx-dkx.dtsi @@ -58,6 +58,11 @@ reg = <0xd4000000 0x4000000>; no-map; }; + + optee@de000000 { + reg = <0xde000000 0x02000000>; + no-map; + }; }; led { @@ -216,10 +221,12 @@ }; &i2c4 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c4_pins_a>; + pinctrl-1 = <&i2c4_pins_sleep_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; + clock-frequency = <400000>; status = "okay"; /* spare dmas for other usage */ /delete-property/dmas; @@ -322,8 +329,6 @@ vdd_usb: ldo4 { regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; interrupts = <IT_CURLIM_LDO4 0>; }; @@ -346,7 +351,6 @@ vref_ddr: vref_ddr { regulator-name = "vref_ddr"; regulator-always-on; - regulator-over-current-protection; }; bst_out: boost { @@ -497,7 +501,8 @@ pinctrl-0 = <&sdmmc1_b4_pins_a>; pinctrl-1 = <&sdmmc1_b4_od_pins_a>; pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; - broken-cd; + cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; st,neg-edge; bus-width = <4>; vmmc-supply = <&v3v3>; diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig index ba965e7b3b..6c995ed8d8 100644 --- a/arch/arm/mach-stm32mp/Kconfig +++ b/arch/arm/mach-stm32mp/Kconfig @@ -86,16 +86,6 @@ config TARGET_DH_STM32MP1_PDK2 endchoice -config STM32MP1_OPTEE - bool "Support trusted boot with TF-A and OP-TEE" - depends on TFABOOT - default n - help - Say Y here to enable boot with TF-A and OP-TEE - Trusted boot chain is : - BootRom => TF-A.stm32 (clock & DDR) => OP-TEE => U-Boot.stm32 - OP-TEE monitor provides ST SMC to access to secure resources - config SYS_TEXT_BASE default 0xC0100000 @@ -117,15 +107,30 @@ config STM32_ETZPC help Say y to enable STM32 Extended TrustZone Protection +config CMD_STM32PROG + bool "command stm32prog for STM32CudeProgrammer" + select DFU + select DFU_RAM + select DFU_VIRT + select PARTITION_TYPE_GUID + imply CMD_GPT if MMC + imply CMD_MTD if MTD + imply DFU_MMC if MMC + imply DFU_MTD if MTD + help + activate a specific command stm32prog for STM32MP soc family + witch update the device with the tools STM32CubeProgrammer, + using UART with STM32 protocol or USB with DFU protocol + NB: access to not volatile memory (NOR/NAND/SD/eMMC) is based + on U-Boot DFU framework + config CMD_STM32KEY bool "command stm32key to fuse public key hash" default y - depends on CMD_FUSE help fuse public key hash in corresponding fuse used to authenticate binary. - config PRE_CON_BUF_ADDR default 0xC02FF000 diff --git a/arch/arm/mach-stm32mp/Makefile b/arch/arm/mach-stm32mp/Makefile index eee39c27c3..66bb8cf92f 100644 --- a/arch/arm/mach-stm32mp/Makefile +++ b/arch/arm/mach-stm32mp/Makefile @@ -10,9 +10,11 @@ obj-y += syscon.o ifdef CONFIG_SPL_BUILD obj-y += spl.o else +obj-$(CONFIG_CMD_STM32PROG) += cmd_stm32prog/ obj-y += bsec.o obj-$(CONFIG_CMD_STM32KEY) += cmd_stm32key.o obj-$(CONFIG_ARMV7_PSCI) += psci.o +obj-$(CONFIG_TFABOOT) += boot_params.o endif obj-$(CONFIG_$(SPL_)DM_REGULATOR) += pwr_regulator.o diff --git a/arch/arm/mach-stm32mp/boot_params.c b/arch/arm/mach-stm32mp/boot_params.c new file mode 100644 index 0000000000..e4351de939 --- /dev/null +++ b/arch/arm/mach-stm32mp/boot_params.c @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2019, STMicroelectronics - All Rights Reserved + */ + +#include <common.h> +#include <asm/sections.h> +#include <asm/system.h> + +/* + * Force data-section, as .bss will not be valid + * when save_boot_params is invoked. + */ +static unsigned long nt_fw_dtb __section(".data"); + +/* + * Save the FDT address provided by TF-A in r2 at boot time + * This function is called from start.S + */ +void save_boot_params(unsigned long r0, unsigned long r1, unsigned long r2, + unsigned long r3) +{ + nt_fw_dtb = r2; + + save_boot_params_ret(); +} + +/* + * Use the saved FDT address provided by TF-A at boot time (NT_FW_CONFIG = + * Non Trusted Firmware configuration file) when the pointer is valid + */ +void *board_fdt_blob_setup(void) +{ + debug("%s: nt_fw_dtb=%lx\n", __func__, nt_fw_dtb); + + /* use external device tree only if address is valid */ + if (nt_fw_dtb >= STM32_DDR_BASE) { + if (fdt_magic(nt_fw_dtb) == FDT_MAGIC) + return (void *)nt_fw_dtb; + debug("%s: DTB not found.\n", __func__); + } + debug("%s: fall back to builtin DTB, %p\n", __func__, &_end); + + return (void *)&_end; +} diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/Makefile b/arch/arm/mach-stm32mp/cmd_stm32prog/Makefile new file mode 100644 index 0000000000..548a378921 --- /dev/null +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2020, STMicroelectronics - All Rights Reserved +# + +obj-y += cmd_stm32prog.o +obj-y += stm32prog.o +obj-y += stm32prog_serial.o +obj-y += stm32prog_usb.o diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c b/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c new file mode 100644 index 0000000000..6bebea7ad5 --- /dev/null +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c @@ -0,0 +1,192 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2020, STMicroelectronics - All Rights Reserved + */ + +#include <common.h> +#include <command.h> +#include <dfu.h> +#include <image.h> +#include <asm/arch/stm32prog.h> +#include "stm32prog.h" + +struct stm32prog_data *stm32prog_data; + +static void enable_vidconsole(void) +{ +#ifdef CONFIG_DM_VIDEO + char *stdname; + char buf[64]; + + stdname = env_get("stdout"); + if (!stdname || !strstr(stdname, "vidconsole")) { + if (!stdname) + snprintf(buf, sizeof(buf), "serial,vidconsole"); + else + snprintf(buf, sizeof(buf), "%s,vidconsole", stdname); + env_set("stdout", buf); + } + + stdname = env_get("stderr"); + if (!stdname || !strstr(stdname, "vidconsole")) { + if (!stdname) + snprintf(buf, sizeof(buf), "serial,vidconsole"); + else + snprintf(buf, sizeof(buf), "%s,vidconsole", stdname); + env_set("stderr", buf); + } +#endif +} + +static int do_stm32prog(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + ulong addr, size; + int dev, ret; + enum stm32prog_link_t link = LINK_UNDEFINED; + bool reset = false; + struct image_header_s header; + struct stm32prog_data *data; + u32 uimage, dtb; + + if (argc < 3 || argc > 5) + return CMD_RET_USAGE; + + if (!strcmp(argv[1], "usb")) + link = LINK_USB; + else if (!strcmp(argv[1], "serial")) + link = LINK_SERIAL; + + if (link == LINK_UNDEFINED) { + pr_err("not supported link=%s\n", argv[1]); + return CMD_RET_USAGE; + } + + dev = (int)simple_strtoul(argv[2], NULL, 10); + + addr = STM32_DDR_BASE; + size = 0; + if (argc > 3) { + addr = simple_strtoul(argv[3], NULL, 16); + if (!addr) + return CMD_RET_FAILURE; + } + if (argc > 4) + size = simple_strtoul(argv[4], NULL, 16); + + /* check STM32IMAGE presence */ + if (size == 0 && + !stm32prog_header_check((struct raw_header_s *)addr, &header)) { + size = header.image_length + BL_HEADER_SIZE; + + /* uImage detected in STM32IMAGE, execute the script */ + if (IMAGE_FORMAT_LEGACY == + genimg_get_format((void *)(addr + BL_HEADER_SIZE))) + return image_source_script(addr + BL_HEADER_SIZE, + "script@1"); + } + + enable_vidconsole(); + + data = (struct stm32prog_data *)malloc(sizeof(*data)); + + if (!data) { + pr_err("Alloc failed."); + return CMD_RET_FAILURE; + } + stm32prog_data = data; + + ret = stm32prog_init(data, addr, size); + if (ret) + printf("Invalid or missing layout file."); + + /* prepare DFU for device read/write */ + ret = stm32prog_dfu_init(data); + if (ret) + goto cleanup; + + switch (link) { + case LINK_SERIAL: + ret = stm32prog_serial_init(data, dev); + if (ret) + goto cleanup; + reset = stm32prog_serial_loop(data); + break; + case LINK_USB: + reset = stm32prog_usb_loop(data, dev); + break; + default: + goto cleanup; + } + + uimage = data->uimage; + dtb = data->dtb; + + stm32prog_clean(data); + free(stm32prog_data); + stm32prog_data = NULL; + + puts("Download done\n"); + + if (uimage) { + char boot_addr_start[20]; + char dtb_addr[20]; + char *bootm_argv[5] = { + "bootm", boot_addr_start, "-", dtb_addr, NULL + }; + if (!dtb) + bootm_argv[3] = env_get("fdtcontroladdr"); + else + snprintf(dtb_addr, sizeof(dtb_addr) - 1, + "0x%x", dtb); + + snprintf(boot_addr_start, sizeof(boot_addr_start) - 1, + "0x%x", uimage); + printf("Booting kernel at %s - %s...\n\n\n", + boot_addr_start, bootm_argv[3]); + /* Try bootm for legacy and FIT format image */ + if (genimg_get_format((void *)uimage) != IMAGE_FORMAT_INVALID) + do_bootm(cmdtp, 0, 4, bootm_argv); + else if CONFIG_IS_ENABLED(CMD_BOOTZ) + do_bootz(cmdtp, 0, 4, bootm_argv); + } + + if (reset) { + puts("Reset...\n"); + run_command("reset", 0); + } + + return CMD_RET_SUCCESS; + +cleanup: + stm32prog_clean(data); + free(stm32prog_data); + stm32prog_data = NULL; + + return CMD_RET_FAILURE; +} + +U_BOOT_CMD(stm32prog, 5, 0, do_stm32prog, + "<link> <dev> [<addr>] [<size>]\n" + "start communication with tools STM32Cubeprogrammer on <link> with Flashlayout at <addr>", + "<link> = serial|usb\n" + "<dev> = device instance\n" + "<addr> = address of flashlayout\n" + "<size> = size of flashlayout\n" +); + +bool stm32prog_get_tee_partitions(void) +{ + if (stm32prog_data) + return stm32prog_data->tee_detected; + + return false; +} + +bool stm32prog_get_fsbl_nor(void) +{ + if (stm32prog_data) + return stm32prog_data->fsbl_nor_detected; + + return false; +} diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c new file mode 100644 index 0000000000..cc303214cf --- /dev/null +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c @@ -0,0 +1,1745 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2020, STMicroelectronics - All Rights Reserved + */ + +#include <common.h> +#include <console.h> +#include <dfu.h> +#include <malloc.h> +#include <misc.h> +#include <mmc.h> +#include <part.h> +#include <asm/arch/stm32mp1_smc.h> +#include <dm/uclass.h> +#include <jffs2/load_kernel.h> +#include <linux/list.h> +#include <linux/list_sort.h> +#include <linux/mtd/mtd.h> +#include <linux/sizes.h> + +#include "stm32prog.h" + +/* Primary GPT header size for 128 entries : 17kB = 34 LBA of 512B */ +#define GPT_HEADER_SZ 34 + +#define OPT_SELECT BIT(0) +#define OPT_EMPTY BIT(1) +#define OPT_DELETE BIT(2) + +#define IS_SELECT(part) ((part)->option & OPT_SELECT) +#define IS_EMPTY(part) ((part)->option & OPT_EMPTY) +#define IS_DELETE(part) ((part)->option & OPT_DELETE) + +#define ALT_BUF_LEN SZ_1K + +#define ROOTFS_MMC0_UUID \ + EFI_GUID(0xE91C4E10, 0x16E6, 0x4C0E, \ + 0xBD, 0x0E, 0x77, 0xBE, 0xCF, 0x4A, 0x35, 0x82) + +#define ROOTFS_MMC1_UUID \ + EFI_GUID(0x491F6117, 0x415D, 0x4F53, \ + 0x88, 0xC9, 0x6E, 0x0D, 0xE5, 0x4D, 0xEA, 0xC6) + +#define ROOTFS_MMC2_UUID \ + EFI_GUID(0xFD58F1C7, 0xBE0D, 0x4338, \ + 0x88, 0xE9, 0xAD, 0x8F, 0x05, 0x0A, 0xEB, 0x18) + +/* RAW parttion (binary / bootloader) used Linux - reserved UUID */ +#define LINUX_RESERVED_UUID "8DA63339-0007-60C0-C436-083AC8230908" + +/* + * unique partition guid (uuid) for partition named "rootfs" + * on each MMC instance = SD Card or eMMC + * allow fixed kernel bootcmd: "rootf=PARTUID=e91c4e10-..." + */ +static const efi_guid_t uuid_mmc[3] = { + ROOTFS_MMC0_UUID, + ROOTFS_MMC1_UUID, + ROOTFS_MMC2_UUID +}; + +DECLARE_GLOBAL_DATA_PTR; + +/* order of column in flash layout file */ +enum stm32prog_col_t { + COL_OPTION, + COL_ID, + COL_NAME, + COL_TYPE, + COL_IP, + COL_OFFSET, + COL_NB_STM32 +}; + +/* partition handling routines : CONFIG_CMD_MTDPARTS */ +int mtdparts_init(void); +int find_dev_and_part(const char *id, struct mtd_device **dev, + u8 *part_num, struct part_info **part); + +char *stm32prog_get_error(struct stm32prog_data *data) +{ + static const char error_msg[] = "Unspecified"; + + if (strlen(data->error) == 0) + strcpy(data->error, error_msg); + + return data->error; +} + +u8 stm32prog_header_check(struct raw_header_s *raw_header, + struct image_header_s *header) +{ + unsigned int i; + + header->present = 0; + header->image_checksum = 0x0; + header->image_length = 0x0; + + if (!raw_header || !header) { + pr_debug("%s:no header data\n", __func__); + return -1; + } + if (raw_header->magic_number != + (('S' << 0) | ('T' << 8) | ('M' << 16) | (0x32 << 24))) { + pr_debug("%s:invalid magic number : 0x%x\n", + __func__, raw_header->magic_number); + return -2; + } + /* only header v1.0 supported */ + if (raw_header->header_version != 0x00010000) { + pr_debug("%s:invalid header version : 0x%x\n", + __func__, raw_header->header_version); + return -3; + } + if (raw_header->reserved1 != 0x0 || raw_header->reserved2) { + pr_debug("%s:invalid reserved field\n", __func__); + return -4; + } + for (i = 0; i < (sizeof(raw_header->padding) / 4); i++) { + if (raw_header->padding[i] != 0) { + pr_debug("%s:invalid padding field\n", __func__); + return -5; + } + } + header->present = 1; + header->image_checksum = le32_to_cpu(raw_header->image_checksum); + header->image_length = le32_to_cpu(raw_header->image_length); + + return 0; +} + +static u32 stm32prog_header_checksum(u32 addr, struct image_header_s *header) +{ + u32 i, checksum; + u8 *payload; + + /* compute checksum on payload */ + payload = (u8 *)addr; + checksum = 0; + for (i = header->image_length; i > 0; i--) + checksum += *(payload++); + + return checksum; +} + +/* FLASHLAYOUT PARSING *****************************************/ +static int parse_option(struct stm32prog_data *data, + int i, char *p, struct stm32prog_part_t *part) +{ + int result = 0; + char *c = p; + + part->option = 0; + if (!strcmp(p, "-")) + return 0; + + while (*c) { + switch (*c) { + case 'P': + part->option |= OPT_SELECT; + break; + case 'E': + part->option |= OPT_EMPTY; + break; + case 'D': + part->option |= OPT_DELETE; + break; + default: + result = -EINVAL; + stm32prog_err("Layout line %d: invalid option '%c' in %s)", + i, *c, p); + return -EINVAL; + } + c++; + } + if (!(part->option & OPT_SELECT)) { + stm32prog_err("Layout line %d: missing 'P' in option %s", i, p); + return -EINVAL; + } + + return result; +} + +static int parse_id(struct stm32prog_data *data, + int i, char *p, struct stm32prog_part_t *part) +{ + int result = 0; + unsigned long value; + + result = strict_strtoul(p, 0, &value); + part->id = value; + if (result || value > PHASE_LAST_USER) { + stm32prog_err("Layout line %d: invalid phase value = %s", i, p); + result = -EINVAL; + } + + return result; +} + +static int parse_name(struct stm32prog_data *data, + int i, char *p, struct stm32prog_part_t *part) +{ + int result = 0; + + if (strlen(p) < sizeof(part->name)) { + strcpy(part->name, p); + } else { + stm32prog_err("Layout line %d: partition name too long [%d]: %s", + i, strlen(p), p); + result = -EINVAL; + } + + return result; +} + +static int parse_type(struct stm32prog_data *data, + int i, char *p, struct stm32prog_part_t *part) +{ + int result = 0; + int len = 0; + + part->bin_nb = 0; + if (!strncmp(p, "Binary", 6)) { + part->part_type = PART_BINARY; + + /* search for Binary(X) case */ + len = strlen(p); + part->bin_nb = 1; + if (len > 6) { + if (len < 8 || + (p[6] != '(') || + (p[len - 1] != ')')) + result = -EINVAL; + else + part->bin_nb = + simple_strtoul(&p[7], NULL, 10); + } + } else if (!strcmp(p, "System")) { + part->part_type = PART_SYSTEM; + } else if (!strcmp(p, "FileSystem")) { + part->part_type = PART_FILESYSTEM; + } else if (!strcmp(p, "RawImage")) { + part->part_type = RAW_IMAGE; + } else { + result = -EINVAL; + } + if (result) + stm32prog_err("Layout line %d: type parsing error : '%s'", + i, p); + + return result; +} + +static int parse_ip(struct stm32prog_data *data, + int i, char *p, struct stm32prog_part_t *part) +{ + int result = 0; + unsigned int len = 0; + + part->dev_id = 0; + if (!strcmp(p, "none")) { + part->target = STM32PROG_NONE; + } else if (!strncmp(p, "mmc", 3)) { + part->target = STM32PROG_MMC; + len = 3; + } else if (!strncmp(p, "nor", 3)) { + part->target = STM32PROG_NOR; + len = 3; + } else if (!strncmp(p, "nand", 4)) { + part->target = STM32PROG_NAND; + len = 4; + } else if (!strncmp(p, "spi-nand", 8)) { + part->target = STM32PROG_SPI_NAND; + len = 8; + } else if (!strncmp(p, "ram", 3)) { + part->target = STM32PROG_RAM; + len = 0; + } else { + result = -EINVAL; + } + if (len) { + /* only one digit allowed for device id */ + if (strlen(p) != len + 1) { + result = -EINVAL; + } else { + part->dev_id = p[len] - '0'; + if (part->dev_id > 9) + result = -EINVAL; + } + } + if (result) + stm32prog_err("Layout line %d: ip parsing error: '%s'", i, p); + + return result; +} + +static int parse_offset(struct stm32prog_data *data, + int i, char *p, struct stm32prog_part_t *part) +{ + int result = 0; + char *tail; + + part->part_id = 0; + part->addr = 0; + part->size = 0; + /* eMMC boot parttion */ + if (!strncmp(p, "boot", 4)) { + if (strlen(p) != 5) { + result = -EINVAL; + } else { + if (p[4] == '1') + part->part_id = -1; + else if (p[4] == '2') + part->part_id = -2; + else + result = -EINVAL; + } + if (result) + stm32prog_err("Layout line %d: invalid part '%s'", + i, p); + } else { + part->addr = simple_strtoull(p, &tail, 0); + if (tail == p || *tail != '\0') { + stm32prog_err("Layout line %d: invalid offset '%s'", + i, p); + result = -EINVAL; + } + } + + return result; +} + +static +int (* const parse[COL_NB_STM32])(struct stm32prog_data *data, int i, char *p, + struct stm32prog_part_t *part) = { + [COL_OPTION] = parse_option, + [COL_ID] = parse_id, + [COL_NAME] = parse_name, + [COL_TYPE] = parse_type, + [COL_IP] = parse_ip, + [COL_OFFSET] = parse_offset, +}; + +static int parse_flash_layout(struct stm32prog_data *data, + ulong addr, + ulong size) +{ + int column = 0, part_nb = 0, ret; + bool end_of_line, eof; + char *p, *start, *last, *col; + struct stm32prog_part_t *part; + int part_list_size; + int i; + + data->part_nb = 0; + + /* check if STM32image is detected */ + if (!stm32prog_header_check((struct raw_header_s *)addr, + &data->header)) { + u32 checksum; + + addr = addr + BL_HEADER_SIZE; + size = data->header.image_length; + + checksum = stm32prog_header_checksum(addr, &data->header); + if (checksum != data->header.image_checksum) { + stm32prog_err("Layout: invalid checksum : 0x%x expected 0x%x", + checksum, data->header.image_checksum); + return -EIO; + } + } + if (!size) + return -EINVAL; + + start = (char *)addr; + last = start + size; + + *last = 0x0; /* force null terminated string */ + pr_debug("flash layout =\n%s\n", start); + + /* calculate expected number of partitions */ + part_list_size = 1; + p = start; + while (*p && (p < last)) { + if (*p++ == '\n') { + part_list_size++; + if (p < last && *p == '#') + part_list_size--; + } + } + if (part_list_size > PHASE_LAST_USER) { + stm32prog_err("Layout: too many partition (%d)", + part_list_size); + return -1; + } + part = calloc(sizeof(struct stm32prog_part_t), part_list_size); + if (!part) { + stm32prog_err("Layout: alloc failed"); + return -ENOMEM; + } + data->part_array = part; + + /* main parsing loop */ + i = 1; + eof = false; + p = start; + col = start; /* 1st column */ + end_of_line = false; + while (!eof) { + switch (*p) { + /* CR is ignored and replaced by NULL character */ + case '\r': + *p = '\0'; + p++; + continue; + case '\0': + end_of_line = true; + eof = true; + break; + case '\n': + end_of_line = true; + break; + case '\t': + break; + case '#': + /* comment line is skipped */ + if (column == 0 && p == col) { + while ((p < last) && *p) + if (*p++ == '\n') + break; + col = p; + i++; + if (p >= last || !*p) { + eof = true; + end_of_line = true; + } + continue; + } + /* fall through */ + /* by default continue with the next character */ + default: + p++; + continue; + } + + /* replace by \0: allow string parsing for each column */ + *p = '\0'; + p++; + if (p >= last) { + eof = true; + end_of_line = true; + } + + /* skip empty line and multiple TAB in tsv file */ + if (strlen(col) == 0) { + col = p; + /* skip empty line */ + if (column == 0 && end_of_line) { + end_of_line = false; + i++; + } + continue; + } + + if (column < COL_NB_STM32) { + ret = parse[column](data, i, col, part); + if (ret) + return ret; + } + + /* save the beginning of the next column */ + column++; + col = p; + + if (!end_of_line) + continue; + + /* end of the line detected */ + end_of_line = false; + + if (column < COL_NB_STM32) { + stm32prog_err("Layout line %d: no enought column", i); + return -EINVAL; + } + column = 0; + part_nb++; + part++; + i++; + if (part_nb >= part_list_size) { + part = NULL; + if (!eof) { + stm32prog_err("Layout: no enought memory for %d part", + part_nb); + return -EINVAL; + } + } + } + data->part_nb = part_nb; + if (data->part_nb == 0) { + stm32prog_err("Layout: no partition found"); + return -ENODEV; + } + + return 0; +} + +static int __init part_cmp(void *priv, struct list_head *a, struct list_head *b) +{ + struct stm32prog_part_t *parta, *partb; + + parta = container_of(a, struct stm32prog_part_t, list); + partb = container_of(b, struct stm32prog_part_t, list); + + if (parta->part_id != partb->part_id) + return parta->part_id - partb->part_id; + else + return parta->addr > partb->addr ? 1 : -1; +} + +static void get_mtd_by_target(char *string, enum stm32prog_target target, + int dev_id) +{ + const char *dev_str; + + switch (target) { + case STM32PROG_NOR: + dev_str = "nor"; + break; + case STM32PROG_NAND: + dev_str = "nand"; + break; + case STM32PROG_SPI_NAND: + dev_str = "spi-nand"; + break; + default: + dev_str = "invalid"; + break; + } + sprintf(string, "%s%d", dev_str, dev_id); +} + +static int init_device(struct stm32prog_data *data, + struct stm32prog_dev_t *dev) +{ + struct mmc *mmc = NULL; + struct blk_desc *block_dev = NULL; +#ifdef CONFIG_MTD + struct mtd_info *mtd = NULL; + char mtd_id[16]; +#endif + int part_id; + int ret; + u64 first_addr = 0, last_addr = 0; + struct stm32prog_part_t *part, *next_part; + u64 part_addr, part_size; + bool part_found; + const char *part_name; + + switch (dev->target) { +#ifdef CONFIG_MMC + case STM32PROG_MMC: + mmc = find_mmc_device(dev->dev_id); + if (mmc_init(mmc)) { + stm32prog_err("mmc device %d not found", dev->dev_id); + return -ENODEV; + } + block_dev = mmc_get_blk_desc(mmc); + if (!block_dev) { + stm32prog_err("mmc device %d not probed", dev->dev_id); + return -ENODEV; + } + dev->erase_size = mmc->erase_grp_size * block_dev->blksz; + dev->mmc = mmc; + + /* reserve a full erase group for each GTP headers */ + if (mmc->erase_grp_size > GPT_HEADER_SZ) { + first_addr = dev->erase_size; + last_addr = (u64)(block_dev->lba - + mmc->erase_grp_size) * + block_dev->blksz; + } else { + first_addr = (u64)GPT_HEADER_SZ * block_dev->blksz; + last_addr = (u64)(block_dev->lba - GPT_HEADER_SZ - 1) * + block_dev->blksz; + } + pr_debug("MMC %d: lba=%ld blksz=%ld\n", dev->dev_id, + block_dev->lba, block_dev->blksz); + pr_debug(" available address = 0x%llx..0x%llx\n", + first_addr, last_addr); + pr_debug(" full_update = %d\n", dev->full_update); + break; +#endif +#ifdef CONFIG_MTD + case STM32PROG_NOR: + case STM32PROG_NAND: + case STM32PROG_SPI_NAND: + get_mtd_by_target(mtd_id, dev->target, dev->dev_id); + pr_debug("%s\n", mtd_id); + + mtdparts_init(); + mtd = get_mtd_device_nm(mtd_id); + if (IS_ERR(mtd)) { + stm32prog_err("MTD device %s not found", mtd_id); + return -ENODEV; + } + first_addr = 0; + last_addr = mtd->size; + dev->erase_size = mtd->erasesize; + pr_debug("MTD device %s: size=%lld erasesize=%d\n", + mtd_id, mtd->size, mtd->erasesize); + pr_debug(" available address = 0x%llx..0x%llx\n", + first_addr, last_addr); + dev->mtd = mtd; + break; +#endif + case STM32PROG_RAM: + first_addr = gd->bd->bi_dram[0].start; + last_addr = first_addr + gd->bd->bi_dram[0].size; + dev->erase_size = 1; + break; + default: + stm32prog_err("unknown device type = %d", dev->target); + return -ENODEV; + } + pr_debug(" erase size = 0x%x\n", dev->erase_size); + pr_debug(" full_update = %d\n", dev->full_update); + + /* order partition list in offset order */ + list_sort(NULL, &dev->part_list, &part_cmp); + part_id = 1; + pr_debug("id : Opt Phase Name target.n dev.n addr size part_off part_size\n"); + list_for_each_entry(part, &dev->part_list, list) { + if (part->bin_nb > 1) { + if ((dev->target != STM32PROG_NAND && + dev->target != STM32PROG_SPI_NAND) || + part->id >= PHASE_FIRST_USER || + strncmp(part->name, "fsbl", 4)) { + stm32prog_err("%s (0x%x): multiple binary %d not supported", + part->name, part->id, + part->bin_nb); + return -EINVAL; + } + } + if (part->part_type == RAW_IMAGE) { + part->part_id = 0x0; + part->addr = 0x0; + if (block_dev) + part->size = block_dev->lba * block_dev->blksz; + else + part->size = last_addr; + pr_debug("-- : %1d %02x %14s %02d.%d %02d.%02d %08llx %08llx\n", + part->option, part->id, part->name, + part->part_type, part->bin_nb, part->target, + part->dev_id, part->addr, part->size); + continue; + } + if (part->part_id < 0) { /* boot hw partition for eMMC */ + if (mmc) { + part->size = mmc->capacity_boot; + } else { + stm32prog_err("%s (0x%x): hw partition not expected : %d", + part->name, part->id, + part->part_id); + return -ENODEV; + } + } else { + part->part_id = part_id++; + + /* last partition : size to the end of the device */ + if (part->list.next != &dev->part_list) { + next_part = + container_of(part->list.next, + struct stm32prog_part_t, + list); + if (part->addr < next_part->addr) { + part->size = next_part->addr - + part->addr; + } else { + stm32prog_err("%s (0x%x): same address : 0x%llx == %s (0x%x): 0x%llx", + part->name, part->id, + part->addr, + next_part->name, + next_part->id, + next_part->addr); + return -EINVAL; + } + } else { + if (part->addr <= last_addr) { + part->size = last_addr - part->addr; + } else { + stm32prog_err("%s (0x%x): invalid address 0x%llx (max=0x%llx)", + part->name, part->id, + part->addr, last_addr); + return -EINVAL; + } + } + if (part->addr < first_addr) { + stm32prog_err("%s (0x%x): invalid address 0x%llx (min=0x%llx)", + part->name, part->id, + part->addr, first_addr); + return -EINVAL; + } + } + if ((part->addr & ((u64)part->dev->erase_size - 1)) != 0) { + stm32prog_err("%s (0x%x): not aligned address : 0x%llx on erase size 0x%x", + part->name, part->id, part->addr, + part->dev->erase_size); + return -EINVAL; + } + pr_debug("%02d : %1d %02x %14s %02d.%d %02d.%02d %08llx %08llx", + part->part_id, part->option, part->id, part->name, + part->part_type, part->bin_nb, part->target, + part->dev_id, part->addr, part->size); + + part_addr = 0; + part_size = 0; + part_found = false; + + /* check coherency with existing partition */ + if (block_dev) { + /* + * block devices with GPT: check user partition size + * only for partial update, the GPT partions are be + * created for full update + */ + if (dev->full_update || part->part_id < 0) { + pr_debug("\n"); + continue; + } + disk_partition_t partinfo; + + ret = part_get_info(block_dev, part->part_id, + &partinfo); + + if (ret) { + stm32prog_err("%s (0x%x):Couldn't find part %d on device mmc %d", + part->name, part->id, + part_id, part->dev_id); + return -ENODEV; + } + part_addr = (u64)partinfo.start * partinfo.blksz; + part_size = (u64)partinfo.size * partinfo.blksz; + part_name = (char *)partinfo.name; + part_found = true; + } + +#ifdef CONFIG_MTD + if (mtd) { + char mtd_part_id[32]; + struct part_info *mtd_part; + struct mtd_device *mtd_dev; + u8 part_num; + + sprintf(mtd_part_id, "%s,%d", mtd_id, + part->part_id - 1); + ret = find_dev_and_part(mtd_part_id, &mtd_dev, + &part_num, &mtd_part); + if (ret != 0) { + stm32prog_err("%s (0x%x): Invalid MTD partition %s", + part->name, part->id, + mtd_part_id); + return -ENODEV; + } + part_addr = mtd_part->offset; + part_size = mtd_part->size; + part_name = mtd_part->name; + part_found = true; + } +#endif + if (!part_found) { + stm32prog_err("%s (0x%x): Invalid partition", + part->name, part->id); + pr_debug("\n"); + continue; + } + + pr_debug(" %08llx %08llx\n", part_addr, part_size); + + if (part->addr != part_addr) { + stm32prog_err("%s (0x%x): Bad address for partition %d (%s) = 0x%llx <> 0x%llx expected", + part->name, part->id, part->part_id, + part_name, part->addr, part_addr); + return -ENODEV; + } + if (part->size != part_size) { + stm32prog_err("%s (0x%x): Bad size for partition %d (%s) at 0x%llx = 0x%llx <> 0x%llx expected", + part->name, part->id, part->part_id, + part_name, part->addr, part->size, + part_size); + return -ENODEV; + } + } + return 0; +} + +static int treat_partition_list(struct stm32prog_data *data) +{ + int i, j; + struct stm32prog_part_t *part; + + for (j = 0; j < STM32PROG_MAX_DEV; j++) { + data->dev[j].target = STM32PROG_NONE; + INIT_LIST_HEAD(&data->dev[j].part_list); + } + + data->tee_detected = false; + data->fsbl_nor_detected = false; + for (i = 0; i < data->part_nb; i++) { + part = &data->part_array[i]; + part->alt_id = -1; + + /* skip partition with IP="none" */ + if (part->target == STM32PROG_NONE) { + if (IS_SELECT(part)) { + stm32prog_err("Layout: selected none phase = 0x%x", + part->id); + return -EINVAL; + } + continue; + } + + if (part->id == PHASE_FLASHLAYOUT || + part->id > PHASE_LAST_USER) { + stm32prog_err("Layout: invalid phase = 0x%x", + part->id); + return -EINVAL; + } + for (j = i + 1; j < data->part_nb; j++) { + if (part->id == data->part_array[j].id) { + stm32prog_err("Layout: duplicated phase 0x%x at line %d and %d", + part->id, i, j); + return -EINVAL; + } + } + for (j = 0; j < STM32PROG_MAX_DEV; j++) { + if (data->dev[j].target == STM32PROG_NONE) { + /* new device found */ + data->dev[j].target = part->target; + data->dev[j].dev_id = part->dev_id; + data->dev[j].full_update = true; + data->dev_nb++; + break; + } else if ((part->target == data->dev[j].target) && + (part->dev_id == data->dev[j].dev_id)) { + break; + } + } + if (j == STM32PROG_MAX_DEV) { + stm32prog_err("Layout: too many device"); + return -EINVAL; + } + switch (part->target) { + case STM32PROG_NOR: + if (!data->fsbl_nor_detected && + !strncmp(part->name, "fsbl", 4)) + data->fsbl_nor_detected = true; + /* fallthrough */ + case STM32PROG_NAND: + case STM32PROG_SPI_NAND: + if (!data->tee_detected && + !strncmp(part->name, "tee", 3)) + data->tee_detected = true; + break; + default: + break; + } + part->dev = &data->dev[j]; + if (!IS_SELECT(part)) + part->dev->full_update = false; + list_add_tail(&part->list, &data->dev[j].part_list); + } + + return 0; +} + +static int create_partitions(struct stm32prog_data *data) +{ +#ifdef CONFIG_MMC + int offset = 0; + const int buflen = SZ_8K; + char *buf; + char uuid[UUID_STR_LEN + 1]; + unsigned char *uuid_bin; + unsigned int mmc_id; + int i; + bool rootfs_found; + struct stm32prog_part_t *part; + + buf = malloc(buflen); + if (!buf) + return -ENOMEM; + + puts("partitions : "); + /* initialize the selected device */ + for (i = 0; i < data->dev_nb; i++) { + /* create gpt partition support only for full update on MMC */ + if (data->dev[i].target != STM32PROG_MMC || + !data->dev[i].full_update) + continue; + + offset = 0; + rootfs_found = false; + memset(buf, 0, buflen); + + list_for_each_entry(part, &data->dev[i].part_list, list) { + /* skip eMMC boot partitions */ + if (part->part_id < 0) + continue; + /* skip Raw Image */ + if (part->part_type == RAW_IMAGE) + continue; + + if (offset + 100 > buflen) { + pr_debug("\n%s: buffer too small, %s skippped", + __func__, part->name); + continue; + } + + if (!offset) + offset += sprintf(buf, "gpt write mmc %d \"", + data->dev[i].dev_id); + + offset += snprintf(buf + offset, buflen - offset, + "name=%s,start=0x%llx,size=0x%llx", + part->name, + part->addr, + part->size); + + if (part->part_type == PART_BINARY) + offset += snprintf(buf + offset, + buflen - offset, + ",type=" + LINUX_RESERVED_UUID); + else + offset += snprintf(buf + offset, + buflen - offset, + ",type=linux"); + + if (part->part_type == PART_SYSTEM) + offset += snprintf(buf + offset, + buflen - offset, + ",bootable"); + + if (!rootfs_found && !strcmp(part->name, "rootfs")) { + mmc_id = part->dev_id; + rootfs_found = true; + if (mmc_id < ARRAY_SIZE(uuid_mmc)) { + uuid_bin = + (unsigned char *)uuid_mmc[mmc_id].b; + uuid_bin_to_str(uuid_bin, uuid, + UUID_STR_FORMAT_GUID); + offset += snprintf(buf + offset, + buflen - offset, + ",uuid=%s", uuid); + } + } + + offset += snprintf(buf + offset, buflen - offset, ";"); + } + + if (offset) { + offset += snprintf(buf + offset, buflen - offset, "\""); + pr_debug("\ncmd: %s\n", buf); + if (run_command(buf, 0)) { + stm32prog_err("GPT partitionning fail: %s", + buf); + free(buf); + + return -1; + } + } + + if (data->dev[i].mmc) + part_init(mmc_get_blk_desc(data->dev[i].mmc)); + +#ifdef DEBUG + sprintf(buf, "gpt verify mmc %d", data->dev[i].dev_id); + pr_debug("\ncmd: %s", buf); + if (run_command(buf, 0)) + printf("fail !\n"); + else + printf("OK\n"); + + sprintf(buf, "part list mmc %d", data->dev[i].dev_id); + run_command(buf, 0); +#endif + } + puts("done\n"); + +#ifdef DEBUG + run_command("mtd list", 0); +#endif + free(buf); +#endif + + return 0; +} + +static int stm32prog_alt_add(struct stm32prog_data *data, + struct dfu_entity *dfu, + struct stm32prog_part_t *part) +{ + int ret = 0; + int offset = 0; + char devstr[10]; + char dfustr[10]; + char buf[ALT_BUF_LEN]; + u32 size; + char multiplier, type; + + /* max 3 digit for sector size */ + if (part->size > SZ_1M) { + size = (u32)(part->size / SZ_1M); + multiplier = 'M'; + } else if (part->size > SZ_1K) { + size = (u32)(part->size / SZ_1K); + multiplier = 'K'; + } else { + size = (u32)part->size; + multiplier = 'B'; + } + if (IS_SELECT(part) && !IS_EMPTY(part)) + type = 'e'; /*Readable and Writeable*/ + else + type = 'a';/*Readable*/ + + memset(buf, 0, sizeof(buf)); + offset = snprintf(buf, ALT_BUF_LEN - offset, + "@%s/0x%02x/1*%d%c%c ", + part->name, part->id, + size, multiplier, type); + + if (part->target == STM32PROG_RAM) { + offset += snprintf(buf + offset, ALT_BUF_LEN - offset, + "ram 0x%llx 0x%llx", + part->addr, part->size); + } else if (part->part_type == RAW_IMAGE) { + u64 dfu_size; + + if (part->dev->target == STM32PROG_MMC) + dfu_size = part->size / part->dev->mmc->read_bl_len; + else + dfu_size = part->size; + offset += snprintf(buf + offset, ALT_BUF_LEN - offset, + "raw 0x0 0x%llx", dfu_size); + } else if (part->part_id < 0) { + u64 nb_blk = part->size / part->dev->mmc->read_bl_len; + + offset += snprintf(buf + offset, ALT_BUF_LEN - offset, + "raw 0x%llx 0x%llx", + part->addr, nb_blk); + offset += snprintf(buf + offset, ALT_BUF_LEN - offset, + " mmcpart %d;", -(part->part_id)); + } else { + if (part->part_type == PART_SYSTEM && + (part->target == STM32PROG_NAND || + part->target == STM32PROG_NOR || + part->target == STM32PROG_SPI_NAND)) + offset += snprintf(buf + offset, + ALT_BUF_LEN - offset, + "partubi"); + else + offset += snprintf(buf + offset, + ALT_BUF_LEN - offset, + "part"); + /* dev_id requested by DFU MMC */ + if (part->target == STM32PROG_MMC) + offset += snprintf(buf + offset, ALT_BUF_LEN - offset, + " %d", part->dev_id); + offset += snprintf(buf + offset, ALT_BUF_LEN - offset, + " %d;", part->part_id); + } + switch (part->target) { +#ifdef CONFIG_MMC + case STM32PROG_MMC: + sprintf(dfustr, "mmc"); + sprintf(devstr, "%d", part->dev_id); + break; +#endif +#ifdef CONFIG_MTD + case STM32PROG_NAND: + case STM32PROG_NOR: + case STM32PROG_SPI_NAND: + sprintf(dfustr, "mtd"); + get_mtd_by_target(devstr, part->target, part->dev_id); + break; +#endif + case STM32PROG_RAM: + sprintf(dfustr, "ram"); + sprintf(devstr, "0"); + break; + default: + stm32prog_err("invalid target: %d", part->target); + return -ENODEV; + } + pr_debug("dfu_alt_add(%s,%s,%s)\n", dfustr, devstr, buf); + ret = dfu_alt_add(dfu, dfustr, devstr, buf); + pr_debug("dfu_alt_add(%s,%s,%s) result %d\n", + dfustr, devstr, buf, ret); + + return ret; +} + +static int stm32prog_alt_add_virt(struct dfu_entity *dfu, + char *name, int phase, int size) +{ + int ret = 0; + char devstr[4]; + char buf[ALT_BUF_LEN]; + + sprintf(devstr, "%d", phase); + sprintf(buf, "@%s/0x%02x/1*%dBe", name, phase, size); + ret = dfu_alt_add(dfu, "virt", devstr, buf); + pr_debug("dfu_alt_add(virt,%s,%s) result %d\n", devstr, buf, ret); + + return ret; +} + +static int dfu_init_entities(struct stm32prog_data *data) +{ + int ret = 0; + int phase, i, alt_id; + struct stm32prog_part_t *part; + struct dfu_entity *dfu; + int alt_nb; + + alt_nb = 3; /* number of virtual = CMD, OTP, PMIC*/ + if (data->part_nb == 0) + alt_nb++; /* +1 for FlashLayout */ + else + for (i = 0; i < data->part_nb; i++) { + if (data->part_array[i].target != STM32PROG_NONE) + alt_nb++; + } + + if (dfu_alt_init(alt_nb, &dfu)) + return -ENODEV; + + puts("DFU alt info setting: "); + if (data->part_nb) { + alt_id = 0; + for (phase = 1; + (phase <= PHASE_LAST_USER) && + (alt_id < alt_nb) && !ret; + phase++) { + /* ordering alt setting by phase id */ + part = NULL; + for (i = 0; i < data->part_nb; i++) { + if (phase == data->part_array[i].id) { + part = &data->part_array[i]; + break; + } + } + if (!part) + continue; + if (part->target == STM32PROG_NONE) + continue; + part->alt_id = alt_id; + alt_id++; + + ret = stm32prog_alt_add(data, dfu, part); + } + } else { + char buf[ALT_BUF_LEN]; + + sprintf(buf, "@FlashLayout/0x%02x/1*256Ke ram %x 40000", + PHASE_FLASHLAYOUT, STM32_DDR_BASE); + ret = dfu_alt_add(dfu, "ram", NULL, buf); + pr_debug("dfu_alt_add(ram, NULL,%s) result %d\n", buf, ret); + } + + if (!ret) + ret = stm32prog_alt_add_virt(dfu, "virtual", PHASE_CMD, 512); + + if (!ret) + ret = stm32prog_alt_add_virt(dfu, "OTP", PHASE_OTP, 512); + + if (!ret && CONFIG_IS_ENABLED(DM_PMIC)) + ret = stm32prog_alt_add_virt(dfu, "PMIC", PHASE_PMIC, 8); + + if (ret) + stm32prog_err("dfu init failed: %d", ret); + puts("done\n"); + +#ifdef DEBUG + dfu_show_entities(); +#endif + return ret; +} + +int stm32prog_otp_write(struct stm32prog_data *data, u32 offset, u8 *buffer, + long *size) +{ + pr_debug("%s: %x %lx\n", __func__, offset, *size); + + if (!data->otp_part) { + data->otp_part = memalign(CONFIG_SYS_CACHELINE_SIZE, OTP_SIZE); + if (!data->otp_part) + return -ENOMEM; + } + + if (!offset) + memset(data->otp_part, 0, OTP_SIZE); + + if (offset + *size > OTP_SIZE) + *size = OTP_SIZE - offset; + + memcpy((void *)((u32)data->otp_part + offset), buffer, *size); + + return 0; +} + +int stm32prog_otp_read(struct stm32prog_data *data, u32 offset, u8 *buffer, + long *size) +{ +#ifndef CONFIG_ARM_SMCCC + stm32prog_err("OTP update not supported"); + + return -1; +#else + int result = 0; + + pr_debug("%s: %x %lx\n", __func__, offset, *size); + /* alway read for first packet */ + if (!offset) { + if (!data->otp_part) + data->otp_part = + memalign(CONFIG_SYS_CACHELINE_SIZE, OTP_SIZE); + + if (!data->otp_part) { + result = -ENOMEM; + goto end_otp_read; + } + + /* init struct with 0 */ + memset(data->otp_part, 0, OTP_SIZE); + + /* call the service */ + result = stm32_smc_exec(STM32_SMC_BSEC, STM32_SMC_READ_ALL, + (u32)data->otp_part, 0); + if (result) + goto end_otp_read; + } + + if (!data->otp_part) { + result = -ENOMEM; + goto end_otp_read; + } + + if (offset + *size > OTP_SIZE) + *size = OTP_SIZE - offset; + memcpy(buffer, (void *)((u32)data->otp_part + offset), *size); + +end_otp_read: + pr_debug("%s: result %i\n", __func__, result); + + return result; +#endif +} + +int stm32prog_otp_start(struct stm32prog_data *data) +{ +#ifndef CONFIG_ARM_SMCCC + stm32prog_err("OTP update not supported"); + + return -1; +#else + int result = 0; + struct arm_smccc_res res; + + if (!data->otp_part) { + stm32prog_err("start OTP without data"); + return -1; + } + + arm_smccc_smc(STM32_SMC_BSEC, STM32_SMC_WRITE_ALL, + (u32)data->otp_part, 0, 0, 0, 0, 0, &res); + + if (!res.a0) { + switch (res.a1) { + case 0: + result = 0; + break; + case 1: + stm32prog_err("Provisioning"); + result = 0; + break; + default: + pr_err("%s: OTP incorrect value (err = %ld)\n", + __func__, res.a1); + result = -EINVAL; + break; + } + } else { + pr_err("%s: Failed to exec svc=%x op=%x in secure mode (err = %ld)\n", + __func__, STM32_SMC_BSEC, STM32_SMC_WRITE_ALL, res.a0); + result = -EINVAL; + } + + free(data->otp_part); + data->otp_part = NULL; + pr_debug("%s: result %i\n", __func__, result); + + return result; +#endif +} + +int stm32prog_pmic_write(struct stm32prog_data *data, u32 offset, u8 *buffer, + long *size) +{ + pr_debug("%s: %x %lx\n", __func__, offset, *size); + + if (!offset) + memset(data->pmic_part, 0, PMIC_SIZE); + + if (offset + *size > PMIC_SIZE) + *size = PMIC_SIZE - offset; + + memcpy(&data->pmic_part[offset], buffer, *size); + + return 0; +} + +int stm32prog_pmic_read(struct stm32prog_data *data, u32 offset, u8 *buffer, + long *size) +{ + int result = 0, ret; + struct udevice *dev; + + if (!CONFIG_IS_ENABLED(PMIC_STPMIC1)) { + stm32prog_err("PMIC update not supported"); + + return -EOPNOTSUPP; + } + + pr_debug("%s: %x %lx\n", __func__, offset, *size); + ret = uclass_get_device_by_driver(UCLASS_MISC, + DM_GET_DRIVER(stpmic1_nvm), + &dev); + if (ret) + return ret; + + /* alway request PMIC for first packet */ + if (!offset) { + /* init struct with 0 */ + memset(data->pmic_part, 0, PMIC_SIZE); + + ret = uclass_get_device_by_driver(UCLASS_MISC, + DM_GET_DRIVER(stpmic1_nvm), + &dev); + if (ret) + return ret; + + ret = misc_read(dev, 0xF8, data->pmic_part, PMIC_SIZE); + if (ret < 0) { + result = ret; + goto end_pmic_read; + } + if (ret != PMIC_SIZE) { + result = -EACCES; + goto end_pmic_read; + } + } + + if (offset + *size > PMIC_SIZE) + *size = PMIC_SIZE - offset; + + memcpy(buffer, &data->pmic_part[offset], *size); + +end_pmic_read: + pr_debug("%s: result %i\n", __func__, result); + return result; +} + +int stm32prog_pmic_start(struct stm32prog_data *data) +{ + int ret; + struct udevice *dev; + + if (!CONFIG_IS_ENABLED(PMIC_STPMIC1)) { + stm32prog_err("PMIC update not supported"); + + return -EOPNOTSUPP; + } + + ret = uclass_get_device_by_driver(UCLASS_MISC, + DM_GET_DRIVER(stpmic1_nvm), + &dev); + if (ret) + return ret; + + return misc_write(dev, 0xF8, data->pmic_part, PMIC_SIZE); +} + +/* copy FSBL on NAND to improve reliability on NAND */ +static int stm32prog_copy_fsbl(struct stm32prog_part_t *part) +{ + int ret, i; + void *fsbl; + struct image_header_s header; + struct raw_header_s raw_header; + struct dfu_entity *dfu; + long size, offset; + + if (part->target != STM32PROG_NAND && + part->target != STM32PROG_SPI_NAND) + return -1; + + dfu = dfu_get_entity(part->alt_id); + + /* read header */ + dfu_transaction_cleanup(dfu); + size = BL_HEADER_SIZE; + ret = dfu->read_medium(dfu, 0, (void *)&raw_header, &size); + if (ret) + return ret; + if (stm32prog_header_check(&raw_header, &header)) + return -1; + + /* read header + payload */ + size = header.image_length + BL_HEADER_SIZE; + size = round_up(size, part->dev->mtd->erasesize); + fsbl = calloc(1, size); + if (!fsbl) + return -ENOMEM; + ret = dfu->read_medium(dfu, 0, fsbl, &size); + pr_debug("%s read size=%lx ret=%d\n", __func__, size, ret); + if (ret) + goto error; + + dfu_transaction_cleanup(dfu); + offset = 0; + for (i = part->bin_nb - 1; i > 0; i--) { + offset += size; + /* write to the next erase block */ + ret = dfu->write_medium(dfu, offset, fsbl, &size); + pr_debug("%s copy at ofset=%lx size=%lx ret=%d", + __func__, offset, size, ret); + if (ret) + goto error; + } + +error: + free(fsbl); + return ret; +} + +static void stm32prog_end_phase(struct stm32prog_data *data) +{ + if (data->phase == PHASE_FLASHLAYOUT) { + if (parse_flash_layout(data, STM32_DDR_BASE, 0)) + stm32prog_err("Layout: invalid FlashLayout"); + return; + } + + if (!data->cur_part) + return; + + if (data->cur_part->target == STM32PROG_RAM) { + if (data->cur_part->part_type == PART_SYSTEM) + data->uimage = data->cur_part->addr; + if (data->cur_part->part_type == PART_FILESYSTEM) + data->dtb = data->cur_part->addr; + } + + if (CONFIG_IS_ENABLED(MMC) && + data->cur_part->part_id < 0) { + char cmdbuf[60]; + + sprintf(cmdbuf, "mmc bootbus %d 0 0 0; mmc partconf %d 1 %d 0", + data->cur_part->dev_id, data->cur_part->dev_id, + -(data->cur_part->part_id)); + if (run_command(cmdbuf, 0)) { + stm32prog_err("commands '%s' failed", cmdbuf); + return; + } + } + + if (CONFIG_IS_ENABLED(MTD) && + data->cur_part->bin_nb > 1) { + if (stm32prog_copy_fsbl(data->cur_part)) { + stm32prog_err("%s (0x%x): copy of fsbl failed", + data->cur_part->name, data->cur_part->id); + return; + } + } +} + +void stm32prog_do_reset(struct stm32prog_data *data) +{ + if (data->phase == PHASE_RESET) { + data->phase = PHASE_DO_RESET; + puts("Reset requested\n"); + } +} + +void stm32prog_next_phase(struct stm32prog_data *data) +{ + int phase, i; + struct stm32prog_part_t *part; + bool found; + + phase = data->phase; + switch (phase) { + case PHASE_RESET: + case PHASE_END: + case PHASE_DO_RESET: + return; + } + + /* found next selected partition */ + data->dfu_seq = 0; + data->cur_part = NULL; + data->phase = PHASE_END; + found = false; + do { + phase++; + if (phase > PHASE_LAST_USER) + break; + for (i = 0; i < data->part_nb; i++) { + part = &data->part_array[i]; + if (part->id == phase) { + if (IS_SELECT(part) && !IS_EMPTY(part)) { + data->cur_part = part; + data->phase = phase; + found = true; + } + break; + } + } + } while (!found); + + if (data->phase == PHASE_END) + puts("Phase=END\n"); +} + +static int part_delete(struct stm32prog_data *data, + struct stm32prog_part_t *part) +{ + int ret = 0; +#ifdef CONFIG_MMC + unsigned long blks, blks_offset, blks_size; + struct blk_desc *block_dev = NULL; + #endif +#ifdef CONFIG_MTD + char cmdbuf[40]; + char devstr[10]; +#endif + + printf("Erasing %s ", part->name); + switch (part->target) { +#ifdef CONFIG_MMC + case STM32PROG_MMC: + printf("on mmc %d: ", part->dev->dev_id); + block_dev = mmc_get_blk_desc(part->dev->mmc); + blks_offset = lldiv(part->addr, part->dev->mmc->read_bl_len); + blks_size = lldiv(part->size, part->dev->mmc->read_bl_len); + /* -1 or -2 : delete boot partition of MMC + * need to switch to associated hwpart 1 or 2 + */ + if (part->part_id < 0) + if (blk_select_hwpart_devnum(IF_TYPE_MMC, + part->dev->dev_id, + -part->part_id)) + return -1; + + blks = blk_derase(block_dev, blks_offset, blks_size); + + /* return to user partition */ + if (part->part_id < 0) + blk_select_hwpart_devnum(IF_TYPE_MMC, + part->dev->dev_id, 0); + if (blks != blks_size) { + ret = -1; + stm32prog_err("%s (0x%x): MMC erase failed", + part->name, part->id); + } + break; +#endif +#ifdef CONFIG_MTD + case STM32PROG_NOR: + case STM32PROG_NAND: + case STM32PROG_SPI_NAND: + get_mtd_by_target(devstr, part->target, part->dev->dev_id); + printf("on %s: ", devstr); + sprintf(cmdbuf, "mtd erase %s 0x%llx 0x%llx", + devstr, part->addr, part->size); + if (run_command(cmdbuf, 0)) { + ret = -1; + stm32prog_err("%s (0x%x): MTD erase commands failed (%s)", + part->name, part->id, cmdbuf); + } + break; +#endif + case STM32PROG_RAM: + printf("on ram: "); + memset((void *)(uintptr_t)part->addr, 0, (size_t)part->size); + break; + default: + ret = -1; + stm32prog_err("%s (0x%x): erase invalid", part->name, part->id); + break; + } + if (!ret) + printf("done\n"); + + return ret; +} + +static void stm32prog_devices_init(struct stm32prog_data *data) +{ + int i; + int ret; + struct stm32prog_part_t *part; + + ret = treat_partition_list(data); + if (ret) + goto error; + + /* initialize the selected device */ + for (i = 0; i < data->dev_nb; i++) { + ret = init_device(data, &data->dev[i]); + if (ret) + goto error; + } + + /* delete RAW partition before create partition */ + for (i = 0; i < data->part_nb; i++) { + part = &data->part_array[i]; + + if (part->part_type != RAW_IMAGE) + continue; + + if (!IS_SELECT(part) || !IS_DELETE(part)) + continue; + + ret = part_delete(data, part); + if (ret) + goto error; + } + + ret = create_partitions(data); + if (ret) + goto error; + + /* delete partition GPT or MTD */ + for (i = 0; i < data->part_nb; i++) { + part = &data->part_array[i]; + + if (part->part_type == RAW_IMAGE) + continue; + + if (!IS_SELECT(part) || !IS_DELETE(part)) + continue; + + ret = part_delete(data, part); + if (ret) + goto error; + } + + return; + +error: + data->part_nb = 0; +} + +int stm32prog_dfu_init(struct stm32prog_data *data) +{ + /* init device if no error */ + if (data->part_nb) + stm32prog_devices_init(data); + + if (data->part_nb) + stm32prog_next_phase(data); + + /* prepare DFU for device read/write */ + dfu_free_entities(); + return dfu_init_entities(data); +} + +int stm32prog_init(struct stm32prog_data *data, ulong addr, ulong size) +{ + memset(data, 0x0, sizeof(*data)); + data->read_phase = PHASE_RESET; + data->phase = PHASE_FLASHLAYOUT; + + return parse_flash_layout(data, addr, size); +} + +void stm32prog_clean(struct stm32prog_data *data) +{ + /* clean */ + dfu_free_entities(); + free(data->part_array); + free(data->otp_part); + free(data->buffer); + free(data->header_data); +} + +/* DFU callback: used after serial and direct DFU USB access */ +void dfu_flush_callback(struct dfu_entity *dfu) +{ + if (!stm32prog_data) + return; + + if (dfu->dev_type == DFU_DEV_VIRT) { + if (dfu->data.virt.dev_num == PHASE_OTP) + stm32prog_otp_start(stm32prog_data); + else if (dfu->data.virt.dev_num == PHASE_PMIC) + stm32prog_pmic_start(stm32prog_data); + return; + } + + if (dfu->dev_type == DFU_DEV_RAM) { + if (dfu->alt == 0 && + stm32prog_data->phase == PHASE_FLASHLAYOUT) { + stm32prog_end_phase(stm32prog_data); + /* waiting DFU DETACH for reenumeration */ + } + } + + if (!stm32prog_data->cur_part) + return; + + if (dfu->alt == stm32prog_data->cur_part->alt_id) { + stm32prog_end_phase(stm32prog_data); + stm32prog_next_phase(stm32prog_data); + } +} + +void dfu_initiated_callback(struct dfu_entity *dfu) +{ + if (!stm32prog_data) + return; + + if (!stm32prog_data->cur_part) + return; + + /* force the saved offset for the current partition */ + if (dfu->alt == stm32prog_data->cur_part->alt_id) { + dfu->offset = stm32prog_data->offset; + stm32prog_data->dfu_seq = 0; + pr_debug("dfu offset = 0x%llx\n", dfu->offset); + } +} diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h new file mode 100644 index 0000000000..bae4e91c01 --- /dev/null +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h @@ -0,0 +1,185 @@ +/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */ +/* + * Copyright (C) 2020, STMicroelectronics - All Rights Reserved + */ + +#ifndef _STM32PROG_H_ +#define _STM32PROG_H_ + +/* - phase defines ------------------------------------------------*/ +#define PHASE_FLASHLAYOUT 0x00 +#define PHASE_FIRST_USER 0x10 +#define PHASE_LAST_USER 0xF0 +#define PHASE_CMD 0xF1 +#define PHASE_OTP 0xF2 +#define PHASE_PMIC 0xF4 +#define PHASE_END 0xFE +#define PHASE_RESET 0xFF +#define PHASE_DO_RESET 0x1FF + +#define DEFAULT_ADDRESS 0xFFFFFFFF + +#define OTP_SIZE 1024 +#define PMIC_SIZE 8 + +enum stm32prog_target { + STM32PROG_NONE, + STM32PROG_MMC, + STM32PROG_NAND, + STM32PROG_NOR, + STM32PROG_SPI_NAND, + STM32PROG_RAM +}; + +enum stm32prog_link_t { + LINK_SERIAL, + LINK_USB, + LINK_UNDEFINED, +}; + +struct image_header_s { + bool present; + u32 image_checksum; + u32 image_length; +}; + +struct raw_header_s { + u32 magic_number; + u32 image_signature[64 / 4]; + u32 image_checksum; + u32 header_version; + u32 image_length; + u32 image_entry_point; + u32 reserved1; + u32 load_address; + u32 reserved2; + u32 version_number; + u32 option_flags; + u32 ecdsa_algorithm; + u32 ecdsa_public_key[64 / 4]; + u32 padding[83 / 4]; + u32 binary_type; +}; + +#define BL_HEADER_SIZE sizeof(struct raw_header_s) + +/* partition type in flashlayout file */ +enum stm32prog_part_type { + PART_BINARY, + PART_SYSTEM, + PART_FILESYSTEM, + RAW_IMAGE +}; + +/* device information */ +struct stm32prog_dev_t { + enum stm32prog_target target; + char dev_id; + u32 erase_size; + struct mmc *mmc; + struct mtd_info *mtd; + /* list of partition for this device / ordered in offset */ + struct list_head part_list; + bool full_update; +}; + +/* partition information build from FlashLayout and device */ +struct stm32prog_part_t { + /* FlashLayout information */ + int option; + int id; + enum stm32prog_part_type part_type; + enum stm32prog_target target; + char dev_id; + + /* partition name + * (16 char in gpt, + 1 for null terminated string + */ + char name[16 + 1]; + u64 addr; + u64 size; + enum stm32prog_part_type bin_nb; /* SSBL repeatition */ + + /* information on associated device */ + struct stm32prog_dev_t *dev; /* pointer to device */ + s16 part_id; /* partition id in device */ + int alt_id; /* alt id in usb/dfu */ + + struct list_head list; +}; + +#define STM32PROG_MAX_DEV 5 +struct stm32prog_data { + /* Layout information */ + int dev_nb; /* device number*/ + struct stm32prog_dev_t dev[STM32PROG_MAX_DEV]; /* array of device */ + int part_nb; /* nb of partition */ + struct stm32prog_part_t *part_array; /* array of partition */ + bool tee_detected; + bool fsbl_nor_detected; + + /* command internal information */ + unsigned int phase; + u32 offset; + char error[255]; + struct stm32prog_part_t *cur_part; + u32 *otp_part; + u8 pmic_part[PMIC_SIZE]; + + /* STM32 header information */ + struct raw_header_s *header_data; + struct image_header_s header; + + /* SERIAL information */ + u32 cursor; + u32 packet_number; + u32 checksum; + u8 *buffer; /* size = USART_RAM_BUFFER_SIZE*/ + int dfu_seq; + u8 read_phase; + + /* bootm information */ + u32 uimage; + u32 dtb; +}; + +extern struct stm32prog_data *stm32prog_data; + +/* OTP access */ +int stm32prog_otp_write(struct stm32prog_data *data, u32 offset, + u8 *buffer, long *size); +int stm32prog_otp_read(struct stm32prog_data *data, u32 offset, + u8 *buffer, long *size); +int stm32prog_otp_start(struct stm32prog_data *data); + +/* PMIC access */ +int stm32prog_pmic_write(struct stm32prog_data *data, u32 offset, + u8 *buffer, long *size); +int stm32prog_pmic_read(struct stm32prog_data *data, u32 offset, + u8 *buffer, long *size); +int stm32prog_pmic_start(struct stm32prog_data *data); + +/* generic part*/ +u8 stm32prog_header_check(struct raw_header_s *raw_header, + struct image_header_s *header); +int stm32prog_dfu_init(struct stm32prog_data *data); +void stm32prog_next_phase(struct stm32prog_data *data); +void stm32prog_do_reset(struct stm32prog_data *data); + +char *stm32prog_get_error(struct stm32prog_data *data); + +#define stm32prog_err(args...) {\ + if (data->phase != PHASE_RESET) { \ + sprintf(data->error, args); \ + data->phase = PHASE_RESET; \ + pr_err("Error: %s\n", data->error); } \ + } + +/* Main function */ +int stm32prog_init(struct stm32prog_data *data, ulong addr, ulong size); +int stm32prog_serial_init(struct stm32prog_data *data, int link_dev); +bool stm32prog_serial_loop(struct stm32prog_data *data); +bool stm32prog_usb_loop(struct stm32prog_data *data, int dev); +void stm32prog_clean(struct stm32prog_data *data); + +#endif diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c new file mode 100644 index 0000000000..5a16979adc --- /dev/null +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c @@ -0,0 +1,993 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2020, STMicroelectronics - All Rights Reserved + */ + +#include <common.h> +#include <console.h> +#include <dfu.h> +#include <malloc.h> +#include <serial.h> +#include <watchdog.h> +#include <dm/lists.h> +#include <dm/device-internal.h> +#include "stm32prog.h" + +/* - configuration part -----------------------------*/ +#define USART_BL_VERSION 0x40 /* USART bootloader version V4.0*/ +#define UBOOT_BL_VERSION 0x03 /* bootloader version V0.3*/ +#define DEVICE_ID_BYTE1 0x05 /* MSB byte of device ID*/ +#define DEVICE_ID_BYTE2 0x00 /* LSB byte of device ID*/ +#define USART_RAM_BUFFER_SIZE 256 /* Size of USART_RAM_Buf buffer*/ + +/* - Commands -----------------------------*/ +#define GET_CMD_COMMAND 0x00 /* Get CMD command*/ +#define GET_VER_COMMAND 0x01 /* Get Version command*/ +#define GET_ID_COMMAND 0x02 /* Get ID command*/ +#define GET_PHASE_COMMAND 0x03 /* Get Phase command*/ +#define RM_COMMAND 0x11 /* Read Memory command*/ +#define READ_PART_COMMAND 0x12 /* Read Partition command*/ +#define START_COMMAND 0x21 /* START command (Go)*/ +#define DOWNLOAD_COMMAND 0x31 /* Download command*/ +/* existing command for other STM32 but not used */ +/* ERASE 0x43 */ +/* EXTENDED_ERASE 0x44 */ +/* WRITE_UNPROTECTED 0x73 */ +/* READOUT_PROTECT 0x82 */ +/* READOUT_UNPROTECT 0x92 */ + +/* - miscellaneous defines ----------------------------------------*/ +#define INIT_BYTE 0x7F /*Init Byte ID*/ +#define ACK_BYTE 0x79 /*Acknowlede Byte ID*/ +#define NACK_BYTE 0x1F /*No Acknowlede Byte ID*/ +#define ABORT_BYTE 0x5F /*ABORT*/ + +struct udevice *down_serial_dev; + +const u8 cmd_id[] = { + GET_CMD_COMMAND, + GET_VER_COMMAND, + GET_ID_COMMAND, + GET_PHASE_COMMAND, + RM_COMMAND, + READ_PART_COMMAND, + START_COMMAND, + DOWNLOAD_COMMAND +}; + +#define NB_CMD sizeof(cmd_id) + +/* DFU support for serial *********************************************/ +static struct dfu_entity *stm32prog_get_entity(struct stm32prog_data *data) +{ + int alt_id; + + if (!data->cur_part) + if (data->phase == PHASE_FLASHLAYOUT) + alt_id = 0; + else + return NULL; + else + alt_id = data->cur_part->alt_id; + + return dfu_get_entity(alt_id); +} + +static int stm32prog_write(struct stm32prog_data *data, u8 *buffer, + u32 buffer_size) +{ + struct dfu_entity *dfu_entity; + u8 ret = 0; + + dfu_entity = stm32prog_get_entity(data); + if (!dfu_entity) + return -ENODEV; + + ret = dfu_write(dfu_entity, + buffer, + buffer_size, + data->dfu_seq); + + if (ret) { + stm32prog_err("DFU write failed [%d] cnt: %d", + ret, data->dfu_seq); + } + data->dfu_seq++; + /* handle rollover as in driver/dfu/dfu.c */ + data->dfu_seq &= 0xffff; + if (buffer_size == 0) + data->dfu_seq = 0; /* flush done */ + + return ret; +} + +static int stm32prog_read(struct stm32prog_data *data, u8 phase, u32 offset, + u8 *buffer, u32 buffer_size) +{ + struct dfu_entity *dfu_entity; + struct stm32prog_part_t *part; + u32 size; + int ret, i; + + if (data->dfu_seq) { + stm32prog_err("DFU write pending for phase %d, seq %d", + data->phase, data->dfu_seq); + return -EINVAL; + } + if (phase == PHASE_FLASHLAYOUT || phase > PHASE_LAST_USER) { + stm32prog_err("read failed : phase %d is invalid", phase); + return -EINVAL; + } + if (data->read_phase <= PHASE_LAST_USER && + phase != data->read_phase) { + /* clear previous read session */ + dfu_entity = dfu_get_entity(data->read_phase - 1); + if (dfu_entity) + dfu_transaction_cleanup(dfu_entity); + } + + dfu_entity = NULL; + /* found partition for the expected phase */ + for (i = 0; i < data->part_nb; i++) { + part = &data->part_array[i]; + if (part->id == phase) + dfu_entity = dfu_get_entity(part->alt_id); + } + if (!dfu_entity) { + stm32prog_err("read failed : phase %d is unknown", phase); + return -ENODEV; + } + + /* clear pending read before to force offset */ + if (dfu_entity->inited && + (data->read_phase != phase || data->offset != offset)) + dfu_transaction_cleanup(dfu_entity); + + /* initiate before to force offset */ + if (!dfu_entity->inited) { + ret = dfu_transaction_initiate(dfu_entity, true); + if (ret < 0) { + stm32prog_err("DFU read init failed [%d] phase = %d offset = 0x%08x", + ret, phase, offset); + return ret; + } + } + /* force new offset */ + if (dfu_entity->offset != offset) + dfu_entity->offset = offset; + data->offset = offset; + data->read_phase = phase; + pr_debug("\nSTM32 download read %s offset=0x%x\n", + dfu_entity->name, offset); + ret = dfu_read(dfu_entity, buffer, buffer_size, + dfu_entity->i_blk_seq_num); + if (ret < 0) { + stm32prog_err("DFU read failed [%d] phase = %d offset = 0x%08x", + ret, phase, offset); + return ret; + } + + size = ret; + + if (size < buffer_size) { + data->offset = 0; + data->read_phase = PHASE_END; + memset(buffer + size, 0, buffer_size - size); + } else { + data->offset += size; + } + + return ret; +} + +/* UART access ***************************************************/ +int stm32prog_serial_init(struct stm32prog_data *data, int link_dev) +{ + struct udevice *dev = NULL; + int node; + char alias[10]; + const char *path; + struct dm_serial_ops *ops; + /* no parity, 8 bits, 1 stop */ + u32 serial_config = SERIAL_DEFAULT_CONFIG; + + down_serial_dev = NULL; + + sprintf(alias, "serial%d", link_dev); + path = fdt_get_alias(gd->fdt_blob, alias); + if (!path) { + pr_err("%s alias not found", alias); + return -ENODEV; + } + node = fdt_path_offset(gd->fdt_blob, path); + if (!uclass_get_device_by_of_offset(UCLASS_SERIAL, node, + &dev)) { + down_serial_dev = dev; + } else if (node > 0 && + !lists_bind_fdt(gd->dm_root, offset_to_ofnode(node), + &dev, false)) { + if (!device_probe(dev)) + down_serial_dev = dev; + } + if (!down_serial_dev) { + pr_err("%s = %s device not found", alias, path); + return -ENODEV; + } + + /* force silent console on uart only when used */ + if (gd->cur_serial_dev == down_serial_dev) + gd->flags |= GD_FLG_DISABLE_CONSOLE | GD_FLG_SILENT; + else + gd->flags &= ~(GD_FLG_DISABLE_CONSOLE | GD_FLG_SILENT); + + ops = serial_get_ops(down_serial_dev); + + if (!ops) { + pr_err("%s = %s missing ops", alias, path); + return -ENODEV; + } + if (!ops->setconfig) { + pr_err("%s = %s missing setconfig", alias, path); + return -ENODEV; + } + + clrsetbits_le32(&serial_config, SERIAL_PAR_MASK, SERIAL_PAR_EVEN); + + data->buffer = memalign(CONFIG_SYS_CACHELINE_SIZE, + USART_RAM_BUFFER_SIZE); + + return ops->setconfig(down_serial_dev, serial_config); +} + +static void stm32prog_serial_flush(void) +{ + struct dm_serial_ops *ops = serial_get_ops(down_serial_dev); + int err; + + do { + err = ops->getc(down_serial_dev); + } while (err != -EAGAIN); +} + +static int stm32prog_serial_getc_err(void) +{ + struct dm_serial_ops *ops = serial_get_ops(down_serial_dev); + int err; + + do { + err = ops->getc(down_serial_dev); + if (err == -EAGAIN) { + ctrlc(); + WATCHDOG_RESET(); + } + } while ((err == -EAGAIN) && (!had_ctrlc())); + + return err; +} + +static u8 stm32prog_serial_getc(void) +{ + int err; + + err = stm32prog_serial_getc_err(); + + return err >= 0 ? err : 0; +} + +static bool stm32prog_serial_get_buffer(u8 *buffer, u32 *count) +{ + struct dm_serial_ops *ops = serial_get_ops(down_serial_dev); + int err; + + do { + err = ops->getc(down_serial_dev); + if (err >= 0) { + *buffer++ = err; + *count -= 1; + } else if (err == -EAGAIN) { + ctrlc(); + WATCHDOG_RESET(); + } else { + break; + } + } while (*count && !had_ctrlc()); + + return !!(err < 0); +} + +static void stm32prog_serial_putc(u8 w_byte) +{ + struct dm_serial_ops *ops = serial_get_ops(down_serial_dev); + int err; + + do { + err = ops->putc(down_serial_dev, w_byte); + } while (err == -EAGAIN); +} + +/* Helper function ************************************************/ + +static u8 stm32prog_header(struct stm32prog_data *data) +{ + u8 ret; + u8 boot = 0; + struct dfu_entity *dfu_entity; + u64 size = 0; + + dfu_entity = stm32prog_get_entity(data); + if (!dfu_entity) + return -ENODEV; + + printf("\nSTM32 download write %s\n", dfu_entity->name); + + /* force cleanup to avoid issue with previous read */ + dfu_transaction_cleanup(dfu_entity); + + ret = stm32prog_header_check(data->header_data, + &data->header); + + /* no header : max size is partition size */ + if (ret) { + dfu_entity->get_medium_size(dfu_entity, &size); + data->header.image_length = size; + } + + /**** Flash the header if necessary for boot partition */ + if (data->phase < PHASE_FIRST_USER) + boot = 1; + + /* write header if boot partition */ + if (boot) { + if (ret) { + stm32prog_err("invalid header (error %d)", ret); + } else { + ret = stm32prog_write(data, + (u8 *)data->header_data, + BL_HEADER_SIZE); + } + } else { + if (ret) + printf(" partition without checksum\n"); + ret = 0; + } + + free(data->header_data); + data->header_data = NULL; + + return ret; +} + +static u8 stm32prog_start(struct stm32prog_data *data, u32 address) +{ + u8 ret = 0; + struct dfu_entity *dfu_entity; + + if (address < 0x100) { + if (address == PHASE_OTP) + return stm32prog_otp_start(data); + + if (address == PHASE_PMIC) + return stm32prog_pmic_start(data); + + if (address == PHASE_RESET || address == PHASE_END) { + data->cur_part = NULL; + data->dfu_seq = 0; + data->phase = address; + return 0; + } + if (address != data->phase) { + stm32prog_err("invalid received phase id %d, current phase is %d", + (u8)address, (u8)data->phase); + return -EINVAL; + } + } + /* check the last loaded partition */ + if (address == DEFAULT_ADDRESS || address == data->phase) { + switch (data->phase) { + case PHASE_END: + case PHASE_RESET: + case PHASE_DO_RESET: + data->cur_part = NULL; + data->phase = PHASE_DO_RESET; + return 0; + } + dfu_entity = stm32prog_get_entity(data); + if (!dfu_entity) + return -ENODEV; + + if (data->dfu_seq) { + ret = dfu_flush(dfu_entity, NULL, 0, data->dfu_seq); + data->dfu_seq = 0; + if (ret) { + stm32prog_err("DFU flush failed [%d]", ret); + return ret; + } + } + printf("\n received length = 0x%x\n", data->cursor); + if (data->header.present) { + if (data->cursor != + (data->header.image_length + BL_HEADER_SIZE)) { + stm32prog_err("transmission interrupted (length=0x%x expected=0x%x)", + data->cursor, + data->header.image_length + + BL_HEADER_SIZE); + return -EIO; + } + if (data->header.image_checksum != data->checksum) { + stm32prog_err("invalid checksum received (0x%x expected 0x%x)", + data->checksum, + data->header.image_checksum); + return -EIO; + } + printf("\n checksum OK (0x%x)\n", data->checksum); + } + + /* update DFU with received flashlayout */ + if (data->phase == PHASE_FLASHLAYOUT) + stm32prog_dfu_init(data); + } else { + void (*entry)(void) = (void *)address; + + printf("## Starting application at 0x%x ...\n", address); + (*entry)(); + printf("## Application terminated\n"); + ret = -ENOEXEC; + } + + return ret; +} + +/** + * get_address() - Get address if it is valid + * + * @tmp_xor: Current xor value to update + * @return The address area + */ +static u32 get_address(u8 *tmp_xor) +{ + u32 address = 0x0; + u8 data; + + data = stm32prog_serial_getc(); + *tmp_xor ^= data; + address |= ((u32)data) << 24; + + data = stm32prog_serial_getc(); + address |= ((u32)data) << 16; + *tmp_xor ^= data; + + data = stm32prog_serial_getc(); + address |= ((u32)data) << 8; + *tmp_xor ^= data; + + data = stm32prog_serial_getc(); + address |= ((u32)data); + *tmp_xor ^= data; + + return address; +} + +static void stm32prog_serial_result(u8 result) +{ + /* always flush fifo before to send result */ + stm32prog_serial_flush(); + stm32prog_serial_putc(result); +} + +/* Command -----------------------------------------------*/ +/** + * get_cmd_command() - Respond to Get command + * + * @data: Current command context + */ +static void get_cmd_command(struct stm32prog_data *data) +{ + u32 counter = 0x0; + + stm32prog_serial_putc(NB_CMD); + stm32prog_serial_putc(USART_BL_VERSION); + + for (counter = 0; counter < NB_CMD; counter++) + stm32prog_serial_putc(cmd_id[counter]); + + stm32prog_serial_result(ACK_BYTE); +} + +/** + * get_version_command() - Respond to Get Version command + * + * @data: Current command context + */ +static void get_version_command(struct stm32prog_data *data) +{ + stm32prog_serial_putc(UBOOT_BL_VERSION); + stm32prog_serial_result(ACK_BYTE); +} + +/** + * get_id_command() - Respond to Get ID command + * + * @data: Current command context + */ +static void get_id_command(struct stm32prog_data *data) +{ + /* Send Device IDCode */ + stm32prog_serial_putc(0x1); + stm32prog_serial_putc(DEVICE_ID_BYTE1); + stm32prog_serial_putc(DEVICE_ID_BYTE2); + stm32prog_serial_result(ACK_BYTE); +} + +/** + * get_phase_command() - Respond to Get phase + * + * @data: Current command context + */ +static void get_phase_command(struct stm32prog_data *data) +{ + char *err_msg = NULL; + u8 i, length = 0; + u32 destination = DEFAULT_ADDRESS; /* destination address */ + int phase = data->phase; + + if (phase == PHASE_RESET || phase == PHASE_DO_RESET) { + err_msg = stm32prog_get_error(data); + length = strlen(err_msg); + } + if (phase == PHASE_FLASHLAYOUT) + destination = STM32_DDR_BASE; + + stm32prog_serial_putc(length + 5); /* Total length */ + stm32prog_serial_putc(phase & 0xFF); /* partition ID */ + stm32prog_serial_putc(destination); /* byte 1 of address */ + stm32prog_serial_putc(destination >> 8); /* byte 2 of address */ + stm32prog_serial_putc(destination >> 16); /* byte 3 of address */ + stm32prog_serial_putc(destination >> 24); /* byte 4 of address */ + + stm32prog_serial_putc(length); /* Information length */ + for (i = 0; i < length; i++) + stm32prog_serial_putc(err_msg[i]); + stm32prog_serial_result(ACK_BYTE); + + if (phase == PHASE_RESET) + stm32prog_do_reset(data); +} + +/** + * read_memory_command() - Read data from memory + * + * @data: Current command context + */ +static void read_memory_command(struct stm32prog_data *data) +{ + u32 address = 0x0; + u8 rcv_data = 0x0, tmp_xor = 0x0; + u32 counter = 0x0; + + /* Read memory address */ + address = get_address(&tmp_xor); + + /* If address memory is not received correctly */ + rcv_data = stm32prog_serial_getc(); + if (rcv_data != tmp_xor) { + stm32prog_serial_result(NACK_BYTE); + return; + } + + stm32prog_serial_result(ACK_BYTE); + + /* Read the number of bytes to be received: + * Max NbrOfData = Data + 1 = 256 + */ + rcv_data = stm32prog_serial_getc(); + tmp_xor = ~rcv_data; + if (stm32prog_serial_getc() != tmp_xor) { + stm32prog_serial_result(NACK_BYTE); + return; + } + + /* If checksum is correct send ACK */ + stm32prog_serial_result(ACK_BYTE); + + /* Send data to the host: + * Number of data to read = data + 1 + */ + for (counter = (rcv_data + 1); counter != 0; counter--) + stm32prog_serial_putc(*(u8 *)(address++)); +} + +/** + * start_command() - Respond to start command + * + * Jump to user application in RAM or partition check + * + * @data: Current command context + */ +static void start_command(struct stm32prog_data *data) +{ + u32 address = 0; + u8 tmp_xor = 0x0; + u8 ret, rcv_data; + + /* Read memory address */ + address = get_address(&tmp_xor); + + /* If address memory is not received correctly */ + rcv_data = stm32prog_serial_getc(); + if (rcv_data != tmp_xor) { + stm32prog_serial_result(NACK_BYTE); + return; + } + /* validate partition */ + ret = stm32prog_start(data, + address); + + if (ret) + stm32prog_serial_result(ABORT_BYTE); + else + stm32prog_serial_result(ACK_BYTE); +} + +/** + * download_command() - Respond to download command + * + * Write data to not volatile memory, Flash + * + * @data: Current command context + */ +static void download_command(struct stm32prog_data *data) +{ + u32 address = 0x0; + u8 my_xor = 0x0; + u8 rcv_xor; + u32 counter = 0x0, codesize = 0x0; + u8 *ramaddress = 0; + u8 rcv_data = 0x0; + struct image_header_s *image_header = &data->header; + u32 cursor = data->cursor; + long size = 0; + u8 operation; + u32 packet_number; + u32 result = ACK_BYTE; + u8 ret; + unsigned int i; + bool error; + int rcv; + + address = get_address(&my_xor); + + /* If address memory is not received correctly */ + rcv_xor = stm32prog_serial_getc(); + if (rcv_xor != my_xor) { + result = NACK_BYTE; + goto end; + } + + /* If address valid send ACK */ + stm32prog_serial_result(ACK_BYTE); + + /* get packet number and operation type */ + operation = (u8)((u32)address >> 24); + packet_number = ((u32)(((u32)address << 8))) >> 8; + + switch (operation) { + /* supported operation */ + case PHASE_FLASHLAYOUT: + case PHASE_OTP: + case PHASE_PMIC: + break; + default: + result = NACK_BYTE; + goto end; + } + /* check the packet number */ + if (packet_number == 0) { + /* erase: re-initialize the image_header struct */ + data->packet_number = 0; + if (data->header_data) + memset(data->header_data, 0, BL_HEADER_SIZE); + else + data->header_data = calloc(1, BL_HEADER_SIZE); + cursor = 0; + data->cursor = 0; + data->checksum = 0; + /*idx = cursor;*/ + } else { + data->packet_number++; + } + + /* Check with the number of current packet if the device receive + * the true packet + */ + if (packet_number != data->packet_number) { + data->packet_number--; + result = NACK_BYTE; + goto end; + } + + /*-- Read number of bytes to be written and data -----------*/ + + /* Read the number of bytes to be written: + * Max NbrOfData = data + 1 <= 256 + */ + rcv_data = stm32prog_serial_getc(); + + /* NbrOfData to write = data + 1 */ + codesize = rcv_data + 0x01; + + if (codesize > USART_RAM_BUFFER_SIZE) { + result = NACK_BYTE; + goto end; + } + + /* Checksum Initialization */ + my_xor = rcv_data; + + /* UART receive data and send to Buffer */ + counter = codesize; + error = stm32prog_serial_get_buffer(data->buffer, &counter); + + /* read checksum */ + if (!error) { + rcv = stm32prog_serial_getc_err(); + error = !!(rcv < 0); + rcv_xor = rcv; + } + + if (error) { + printf("transmission error on packet %d, byte %d\n", + packet_number, codesize - counter); + /* waiting end of packet before flush & NACK */ + mdelay(30); + data->packet_number--; + result = NACK_BYTE; + goto end; + } + + /* Compute Checksum */ + ramaddress = data->buffer; + for (counter = codesize; counter != 0; counter--) + my_xor ^= *(ramaddress++); + + /* If Checksum is incorrect */ + if (rcv_xor != my_xor) { + printf("checksum error on packet %d\n", + packet_number); + /* wait to be sure that all data are received + * in the FIFO before flush + */ + mdelay(30); + data->packet_number--; + result = NACK_BYTE; + goto end; + } + + /* Update current position in buffer */ + data->cursor += codesize; + + if (operation == PHASE_OTP) { + size = data->cursor - cursor; + /* no header for OTP */ + if (stm32prog_otp_write(data, cursor, + data->buffer, &size)) + result = ABORT_BYTE; + goto end; + } + + if (operation == PHASE_PMIC) { + size = data->cursor - cursor; + /* no header for PMIC */ + if (stm32prog_pmic_write(data, cursor, + data->buffer, &size)) + result = ABORT_BYTE; + goto end; + } + + if (cursor < BL_HEADER_SIZE) { + /* size = portion of header in this chunck */ + if (data->cursor >= BL_HEADER_SIZE) + size = BL_HEADER_SIZE - cursor; + else + size = data->cursor - cursor; + memcpy((void *)((u32)(data->header_data) + cursor), + data->buffer, size); + cursor += size; + + if (cursor == BL_HEADER_SIZE) { + /* Check and Write the header */ + if (stm32prog_header(data)) { + result = ABORT_BYTE; + goto end; + } + } else { + goto end; + } + } + + if (image_header->present) { + if (data->cursor <= BL_HEADER_SIZE) + goto end; + /* compute checksum on payload */ + for (i = (unsigned long)size; i < codesize; i++) + data->checksum += data->buffer[i]; + + if (data->cursor > + image_header->image_length + BL_HEADER_SIZE) { + pr_err("expected size exceeded\n"); + result = ABORT_BYTE; + goto end; + } + + /* write data (payload) */ + ret = stm32prog_write(data, + &data->buffer[size], + codesize - size); + } else { + /* write all */ + ret = stm32prog_write(data, + data->buffer, + codesize); + } + if (ret) + result = ABORT_BYTE; + +end: + stm32prog_serial_result(result); +} + +/** + * read_partition() - Respond to read command + * + * Read data from not volatile memory, Flash + * + * @data: Current command context + */ +static void read_partition_command(struct stm32prog_data *data) +{ + u32 i, part_id, codesize, offset = 0, rcv_data; + long size; + u8 tmp_xor; + int res; + u8 buffer[256]; + + part_id = stm32prog_serial_getc(); + tmp_xor = part_id; + + offset = get_address(&tmp_xor); + + rcv_data = stm32prog_serial_getc(); + if (rcv_data != tmp_xor) { + pr_debug("1st checksum received = %x, computed %x\n", + rcv_data, tmp_xor); + goto error; + } + stm32prog_serial_putc(ACK_BYTE); + + /* NbrOfData to read = data + 1 */ + rcv_data = stm32prog_serial_getc(); + codesize = rcv_data + 0x01; + tmp_xor = rcv_data; + + rcv_data = stm32prog_serial_getc(); + if ((rcv_data ^ tmp_xor) != 0xFF) { + pr_debug("2nd checksum received = %x, computed %x\n", + rcv_data, tmp_xor); + goto error; + } + + pr_debug("%s : %x\n", __func__, part_id); + rcv_data = 0; + switch (part_id) { + case PHASE_OTP: + size = codesize; + if (!stm32prog_otp_read(data, offset, buffer, &size)) + rcv_data = size; + break; + case PHASE_PMIC: + size = codesize; + if (!stm32prog_pmic_read(data, offset, buffer, &size)) + rcv_data = size; + break; + default: + res = stm32prog_read(data, part_id, offset, + buffer, codesize); + if (res > 0) + rcv_data = res; + break; + } + if (rcv_data > 0) { + stm32prog_serial_putc(ACK_BYTE); + /*----------- Send data to the host -----------*/ + for (i = 0; i < rcv_data; i++) + stm32prog_serial_putc(buffer[i]); + /*----------- Send filler to the host -----------*/ + for (; i < codesize; i++) + stm32prog_serial_putc(0x0); + return; + } + stm32prog_serial_result(ABORT_BYTE); + return; + +error: + stm32prog_serial_result(NACK_BYTE); +} + +/* MAIN function = SERIAL LOOP ***********************************************/ + +/** + * stm32prog_serial_loop() - USART bootloader Loop routine + * + * @data: Current command context + * @return true if reset is needed after loop + */ +bool stm32prog_serial_loop(struct stm32prog_data *data) +{ + u32 counter = 0x0; + u8 command = 0x0; + u8 found; + int phase = data->phase; + + /* element of cmd_func need to aligned with cmd_id[]*/ + void (*cmd_func[NB_CMD])(struct stm32prog_data *) = { + /* GET_CMD_COMMAND */ get_cmd_command, + /* GET_VER_COMMAND */ get_version_command, + /* GET_ID_COMMAND */ get_id_command, + /* GET_PHASE_COMMAND */ get_phase_command, + /* RM_COMMAND */ read_memory_command, + /* READ_PART_COMMAND */ read_partition_command, + /* START_COMMAND */ start_command, + /* DOWNLOAD_COMMAND */ download_command + }; + + /* flush and NACK pending command received during u-boot init + * request command reemit + */ + stm32prog_serial_result(NACK_BYTE); + + clear_ctrlc(); /* forget any previous Control C */ + while (!had_ctrlc()) { + phase = data->phase; + + if (phase == PHASE_DO_RESET) + return true; + + /* Get the user command: read first byte */ + command = stm32prog_serial_getc(); + + if (command == INIT_BYTE) { + puts("\nConnected\n"); + stm32prog_serial_result(ACK_BYTE); + continue; + } + + found = 0; + for (counter = 0; counter < NB_CMD; counter++) + if (cmd_id[counter] == command) { + found = 1; + break; + } + if (found) + if ((command ^ stm32prog_serial_getc()) != 0xFF) + found = 0; + if (!found) { + /* wait to be sure that all data are received + * in the FIFO before flush (CMD and XOR) + */ + mdelay(3); + stm32prog_serial_result(NACK_BYTE); + } else { + stm32prog_serial_result(ACK_BYTE); + cmd_func[counter](data); + } + WATCHDOG_RESET(); + } + + /* clean device */ + if (gd->cur_serial_dev == down_serial_dev) { + /* restore console on uart */ + gd->flags &= ~(GD_FLG_DISABLE_CONSOLE | GD_FLG_SILENT); + } + down_serial_dev = NULL; + + return false; /* no reset after ctrlc */ +} diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_usb.c b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_usb.c new file mode 100644 index 0000000000..969245e199 --- /dev/null +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_usb.c @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2020, STMicroelectronics - All Rights Reserved + */ + +#include <common.h> +#include <dfu.h> +#include <g_dnl.h> +#include <usb.h> +#include <asm/arch/stm32prog.h> +#include <asm/arch/sys_proto.h> +#include "stm32prog.h" + +static int stm32prog_set_phase(struct stm32prog_data *data, u8 phase, + u32 offset) +{ + struct stm32prog_part_t *part; + int i; + + if (phase == data->phase) { + data->offset = offset; + data->dfu_seq = 0; + return 0; + } + + /* found partition for phase */ + for (i = 0; i < data->part_nb; i++) { + part = &data->part_array[i]; + if (part->id == phase) { + data->cur_part = part; + data->phase = phase; + data->offset = offset; + data->dfu_seq = 0; + return 0; + } + } + + return -EINVAL; +} + +static int stm32prog_cmd_write(u64 offset, void *buf, long *len) +{ + u8 phase; + u32 address; + u8 *pt = buf; + void (*entry)(void); + int ret; + + if (*len < 5) { + pr_err("size not allowed\n"); + return -EINVAL; + } + if (offset) { + pr_err("invalid offset\n"); + return -EINVAL; + } + phase = pt[0]; + address = (pt[1] << 24) | (pt[2] << 16) | (pt[3] << 8) | pt[4]; + if (phase == PHASE_RESET) { + entry = (void *)address; + printf("## Starting application at 0x%x ...\n", address); + (*entry)(); + printf("## Application terminated\n"); + return 0; + } + /* set phase and offset */ + ret = stm32prog_set_phase(stm32prog_data, phase, address); + if (ret) + pr_err("failed: %d\n", ret); + return ret; +} + +#define PHASE_MIN_SIZE 9 +static int stm32prog_cmd_read(u64 offset, void *buf, long *len) +{ + u32 destination = DEFAULT_ADDRESS; /* destination address */ + u32 dfu_offset; + u8 *pt_buf = buf; + int phase; + char *err_msg; + int length; + + if (*len < PHASE_MIN_SIZE) { + pr_err("request exceeds allowed area\n"); + return -EINVAL; + } + if (offset) { + *len = 0; /* EOF for second request */ + return 0; + } + phase = stm32prog_data->phase; + if (phase == PHASE_FLASHLAYOUT) + destination = STM32_DDR_BASE; + dfu_offset = stm32prog_data->offset; + + /* mandatory header, size = PHASE_MIN_SIZE */ + *pt_buf++ = (u8)(phase & 0xFF); + *pt_buf++ = (u8)(destination); + *pt_buf++ = (u8)(destination >> 8); + *pt_buf++ = (u8)(destination >> 16); + *pt_buf++ = (u8)(destination >> 24); + *pt_buf++ = (u8)(dfu_offset); + *pt_buf++ = (u8)(dfu_offset >> 8); + *pt_buf++ = (u8)(dfu_offset >> 16); + *pt_buf++ = (u8)(dfu_offset >> 24); + + if (phase == PHASE_RESET || phase == PHASE_DO_RESET) { + err_msg = stm32prog_get_error(stm32prog_data); + length = strlen(err_msg); + if (length + PHASE_MIN_SIZE > *len) + length = *len - PHASE_MIN_SIZE; + + memcpy(pt_buf, err_msg, length); + *len = PHASE_MIN_SIZE + length; + stm32prog_do_reset(stm32prog_data); + } else if (phase == PHASE_FLASHLAYOUT) { + *pt_buf++ = stm32prog_data->part_nb ? 1 : 0; + *len = PHASE_MIN_SIZE + 1; + } else { + *len = PHASE_MIN_SIZE; + } + + return 0; +} + +int stm32prog_write_medium_virt(struct dfu_entity *dfu, u64 offset, + void *buf, long *len) +{ + if (dfu->dev_type != DFU_DEV_VIRT) + return -EINVAL; + + switch (dfu->data.virt.dev_num) { + case PHASE_CMD: + return stm32prog_cmd_write(offset, buf, len); + + case PHASE_OTP: + return stm32prog_otp_write(stm32prog_data, (u32)offset, + buf, len); + + case PHASE_PMIC: + return stm32prog_pmic_write(stm32prog_data, (u32)offset, + buf, len); + } + *len = 0; + return 0; +} + +int stm32prog_read_medium_virt(struct dfu_entity *dfu, u64 offset, + void *buf, long *len) +{ + if (dfu->dev_type != DFU_DEV_VIRT) + return -EINVAL; + + switch (dfu->data.virt.dev_num) { + case PHASE_CMD: + return stm32prog_cmd_read(offset, buf, len); + + case PHASE_OTP: + return stm32prog_otp_read(stm32prog_data, (u32)offset, + buf, len); + + case PHASE_PMIC: + return stm32prog_pmic_read(stm32prog_data, (u32)offset, + buf, len); + } + *len = 0; + return 0; +} + +int stm32prog_get_medium_size_virt(struct dfu_entity *dfu, u64 *size) +{ + if (dfu->dev_type != DFU_DEV_VIRT) { + *size = 0; + pr_debug("%s, invalid dev_type = %d\n", + __func__, dfu->dev_type); + return -EINVAL; + } + + switch (dfu->data.virt.dev_num) { + case PHASE_CMD: + *size = 512; + break; + case PHASE_OTP: + *size = OTP_SIZE; + break; + case PHASE_PMIC: + *size = PMIC_SIZE; + break; + } + + return 0; +} + +bool stm32prog_usb_loop(struct stm32prog_data *data, int dev) +{ + int ret; + bool result; + /* USB download gadget for STM32 Programmer */ + char product[128]; + + snprintf(product, sizeof(product), + "USB download gadget@Device ID /0x%03X, @Revision ID /0x%04X", + get_cpu_dev(), get_cpu_rev()); + g_dnl_set_product(product); + + if (stm32prog_data->phase == PHASE_FLASHLAYOUT) { + ret = run_usb_dnl_gadget(dev, "usb_dnl_dfu"); + if (ret || stm32prog_data->phase == PHASE_DO_RESET) + return ret; + /* prepare the second enumeration with the FlashLayout */ + if (stm32prog_data->phase == PHASE_FLASHLAYOUT) + stm32prog_dfu_init(data); + /* found next selected partition */ + stm32prog_next_phase(data); + } + + ret = run_usb_dnl_gadget(dev, "usb_dnl_dfu"); + + result = !!(ret) || (stm32prog_data->phase == PHASE_DO_RESET); + + g_dnl_set_product(NULL); + + return result; +} + +int g_dnl_get_board_bcd_device_number(int gcnum) +{ + pr_debug("%s\n", __func__); + return 0x200; +} diff --git a/arch/arm/mach-stm32mp/cpu.c b/arch/arm/mach-stm32mp/cpu.c index 74d03fa7dd..5a10808a44 100644 --- a/arch/arm/mach-stm32mp/cpu.c +++ b/arch/arm/mach-stm32mp/cpu.c @@ -75,6 +75,12 @@ #define PKG_SHIFT 27 #define PKG_MASK GENMASK(2, 0) +/* + * early TLB into the .data section so that it not get cleared + * with 16kB allignment (see TTBR0_BASE_ADDR_MASK) + */ +u8 early_tlb[PGTABLE_SIZE] __section(".data") __aligned(0x4000); + #if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) #ifndef CONFIG_TFABOOT static void security_init(void) @@ -187,12 +193,40 @@ u32 get_bootmode(void) } /* + * initialize the MMU and activate cache in SPL or in U-Boot pre-reloc stage + * MMU/TLB is updated in enable_caches() for U-Boot after relocation + * or is deactivated in U-Boot entry function start.S::cpu_init_cp15 + */ +static void early_enable_caches(void) +{ + /* I-cache is already enabled in start.S: cpu_init_cp15 */ + + if (CONFIG_IS_ENABLED(SYS_DCACHE_OFF)) + return; + + gd->arch.tlb_size = PGTABLE_SIZE; + gd->arch.tlb_addr = (unsigned long)&early_tlb; + + dcache_enable(); + + if (IS_ENABLED(CONFIG_SPL_BUILD)) + mmu_set_region_dcache_behaviour(STM32_SYSRAM_BASE, + STM32_SYSRAM_SIZE, + DCACHE_DEFAULT_OPTION); + else + mmu_set_region_dcache_behaviour(STM32_DDR_BASE, STM32_DDR_SIZE, + DCACHE_DEFAULT_OPTION); +} + +/* * Early system init */ int arch_cpu_init(void) { u32 boot_mode; + early_enable_caches(); + /* early armv7 timer init: needed for polling */ timer_init(); @@ -225,7 +259,14 @@ int arch_cpu_init(void) void enable_caches(void) { - /* Enable D-cache. I-cache is already enabled in start.S */ + /* I-cache is already enabled in start.S: icache_enable() not needed */ + + /* deactivate the data cache, early enabled in arch_cpu_init() */ + dcache_disable(); + /* + * update MMU after relocation and enable the data cache + * warning: the TLB location udpated in board_f.c::reserve_mmu + */ dcache_enable(); } @@ -236,6 +277,11 @@ static u32 read_idc(void) return readl(DBGMCU_IDC); } +u32 get_cpu_dev(void) +{ + return (read_idc() & DBGMCU_IDC_DEV_ID_MASK) >> DBGMCU_IDC_DEV_ID_SHIFT; +} + u32 get_cpu_rev(void) { return (read_idc() & DBGMCU_IDC_REV_ID_MASK) >> DBGMCU_IDC_REV_ID_SHIFT; @@ -266,11 +312,7 @@ static u32 get_cpu_rpn(void) u32 get_cpu_type(void) { - u32 id; - - id = (read_idc() & DBGMCU_IDC_DEV_ID_MASK) >> DBGMCU_IDC_DEV_ID_SHIFT; - - return (id << 16) | get_cpu_rpn(); + return (get_cpu_dev() << 16) | get_cpu_rpn(); } /* Get Package options from OTP */ @@ -435,6 +477,10 @@ static void setup_boot_mode(void) env_set("boot_device", "nand"); env_set("boot_instance", "0"); break; + case BOOT_FLASH_SPINAND: + env_set("boot_device", "spi-nand"); + env_set("boot_instance", "0"); + break; case BOOT_FLASH_NOR: env_set("boot_device", "nor"); env_set("boot_instance", "0"); diff --git a/arch/arm/mach-stm32mp/dram_init.c b/arch/arm/mach-stm32mp/dram_init.c index 7688b3e315..3233415eff 100644 --- a/arch/arm/mach-stm32mp/dram_init.c +++ b/arch/arm/mach-stm32mp/dram_init.c @@ -5,6 +5,7 @@ #include <common.h> #include <dm.h> +#include <lmb.h> #include <ram.h> DECLARE_GLOBAL_DATA_PTR; @@ -31,3 +32,20 @@ int dram_init(void) return 0; } + +ulong board_get_usable_ram_top(ulong total_size) +{ + phys_addr_t reg; + struct lmb lmb; + + /* found enough not-reserved memory to relocated U-Boot */ + lmb_init(&lmb); + lmb_add(&lmb, gd->ram_base, gd->ram_size); + boot_fdt_add_mem_rsv_regions(&lmb, (void *)gd->fdt_blob); + reg = lmb_alloc(&lmb, CONFIG_SYS_MALLOC_LEN + total_size, SZ_4K); + + if (reg) + return ALIGN(reg + CONFIG_SYS_MALLOC_LEN + total_size, SZ_4K); + + return gd->ram_top; +} diff --git a/arch/arm/mach-stm32mp/fdt.c b/arch/arm/mach-stm32mp/fdt.c index 3ee7d6a833..21b5f09728 100644 --- a/arch/arm/mach-stm32mp/fdt.c +++ b/arch/arm/mach-stm32mp/fdt.c @@ -5,6 +5,7 @@ #include <common.h> #include <fdt_support.h> +#include <tee.h> #include <asm/arch/sys_proto.h> #include <dt-bindings/pinctrl/stm32-pinfunc.h> #include <linux/io.h> @@ -218,6 +219,26 @@ static void stm32_fdt_disable(void *fdt, int offset, u32 addr, string, addr, name); } +static void stm32_fdt_disable_optee(void *blob) +{ + int off, node; + + off = fdt_node_offset_by_compatible(blob, -1, "linaro,optee-tz"); + if (off >= 0 && fdtdec_get_is_enabled(blob, off)) + fdt_status_disabled(blob, off); + + /* Disabled "optee@..." reserved-memory node */ + off = fdt_path_offset(blob, "/reserved-memory/"); + if (off < 0) + return; + for (node = fdt_first_subnode(blob, off); + node >= 0; + node = fdt_next_subnode(blob, node)) { + if (!strncmp(fdt_get_name(blob, node, NULL), "optee@", 6)) + fdt_status_disabled(blob, node); + } +} + /* * This function is called right before the kernel is booted. "blob" is the * device tree that will be passed to the kernel. @@ -302,5 +323,9 @@ int ft_system_setup(void *blob, bd_t *bd) "st,package", pkg, false); } + if (!CONFIG_IS_ENABLED(OPTEE) || + !tee_find_device(NULL, NULL, NULL, NULL)) + stm32_fdt_disable_optee(blob); + return ret; } diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h b/arch/arm/mach-stm32mp/include/mach/stm32.h index 76d593d785..242bacc50b 100644 --- a/arch/arm/mach-stm32mp/include/mach/stm32.h +++ b/arch/arm/mach-stm32mp/include/mach/stm32.h @@ -80,6 +80,9 @@ enum boot_device { BOOT_SERIAL_USB = 0x60, BOOT_SERIAL_USB_OTG = 0x62, + + BOOT_FLASH_SPINAND = 0x70, + BOOT_FLASH_SPINAND_1 = 0x71, }; /* TAMP registers */ diff --git a/arch/arm/mach-stm32mp/include/mach/stm32prog.h b/arch/arm/mach-stm32mp/include/mach/stm32prog.h new file mode 100644 index 0000000000..c080b9cc42 --- /dev/null +++ b/arch/arm/mach-stm32mp/include/mach/stm32prog.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */ +/* + * Copyright (C) 2020, STMicroelectronics - All Rights Reserved + */ + +#define STM32PROG_VIRT_FIRST_DEV_NUM 0xF1 + +int stm32prog_write_medium_virt(struct dfu_entity *dfu, u64 offset, + void *buf, long *len); +int stm32prog_read_medium_virt(struct dfu_entity *dfu, u64 offset, + void *buf, long *len); +int stm32prog_get_medium_size_virt(struct dfu_entity *dfu, u64 *size); + +bool stm32prog_get_tee_partitions(void); + +bool stm32prog_get_fsbl_nor(void); diff --git a/arch/arm/mach-stm32mp/include/mach/sys_proto.h b/arch/arm/mach-stm32mp/include/mach/sys_proto.h index 1617126bea..4b6c7b8bdd 100644 --- a/arch/arm/mach-stm32mp/include/mach/sys_proto.h +++ b/arch/arm/mach-stm32mp/include/mach/sys_proto.h @@ -20,6 +20,11 @@ /* return CPU_STMP32MP...Xxx constants */ u32 get_cpu_type(void); +#define CPU_DEV_STM32MP15 0x500 + +/* return CPU_DEV constants */ +u32 get_cpu_dev(void); + #define CPU_REVA 0x1000 #define CPU_REVB 0x2000 #define CPU_REVZ 0x2001 diff --git a/arch/arm/mach-stm32mp/spl.c b/arch/arm/mach-stm32mp/spl.c index f85391c6af..b7e7e92ef6 100644 --- a/arch/arm/mach-stm32mp/spl.c +++ b/arch/arm/mach-stm32mp/spl.c @@ -4,6 +4,7 @@ */ #include <common.h> +#include <cpu_func.h> #include <dm.h> #include <hang.h> #include <spl.h> @@ -39,6 +40,8 @@ u32 spl_boot_device(void) return BOOT_DEVICE_NAND; case BOOT_FLASH_NOR_QSPI: return BOOT_DEVICE_SPI; + case BOOT_FLASH_SPINAND_1: + return BOOT_DEVICE_NONE; /* SPINAND not supported in SPL */ } return BOOT_DEVICE_MMC1; @@ -76,6 +79,11 @@ void spl_display_print(void) } #endif +__weak int board_early_init_f(void) +{ + return 0; +} + void board_init_f(ulong dummy) { struct udevice *dev; @@ -92,27 +100,51 @@ void board_init_f(ulong dummy) ret = uclass_get_device(UCLASS_CLK, 0, &dev); if (ret) { debug("Clock init failed: %d\n", ret); - return; + hang(); } ret = uclass_get_device(UCLASS_RESET, 0, &dev); if (ret) { debug("Reset init failed: %d\n", ret); - return; + hang(); } ret = uclass_get_device(UCLASS_PINCTRL, 0, &dev); if (ret) { debug("%s: Cannot find pinctrl device\n", __func__); - return; + hang(); } /* enable console uart printing */ preloader_console_init(); + ret = board_early_init_f(); + if (ret) { + debug("board_early_init_f() failed: %d\n", ret); + hang(); + } + ret = uclass_get_device(UCLASS_RAM, 0, &dev); if (ret) { printf("DRAM init failed: %d\n", ret); hang(); } + + /* + * activate cache on DDR only when DDR is fully initialized + * to avoid speculative access and issue in get_ram_size() + */ + if (!CONFIG_IS_ENABLED(SYS_DCACHE_OFF)) + mmu_set_region_dcache_behaviour(STM32_DDR_BASE, STM32_DDR_SIZE, + DCACHE_DEFAULT_OPTION); +} + +void spl_board_prepare_for_boot(void) +{ + dcache_disable(); +} + +void spl_board_prepare_for_boot_linux(void) +{ + dcache_disable(); } |