diff options
| author | Hannes Schmelzer <hannes.schmelzer@br-automation.com> | 2019-01-31 11:24:45 +0300 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2019-02-09 15:50:58 +0300 |
| commit | a9484aa769b0f8312abbfa5698b685e188eea78e (patch) | |
| tree | 16791e609fc785f7ef60535ab910379684951733 /board/BuR | |
| parent | 351a4aa050c834954498e2114cab3429597b7c92 (diff) | |
| download | u-boot-a9484aa769b0f8312abbfa5698b685e188eea78e.tar.xz | |
board/BuR/brppt1: drop DM_I2C_COMPAT
The TPS62517 PMIC driver has been partially converted to DM, so the
legacy I2C access layer isn't needed anymore.
Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
Diffstat (limited to 'board/BuR')
| -rw-r--r-- | board/BuR/brppt1/board.c | 5 | ||||
| -rw-r--r-- | board/BuR/brxre1/board.c | 2 | ||||
| -rw-r--r-- | board/BuR/common/bur_common.h | 2 | ||||
| -rw-r--r-- | board/BuR/common/common.c | 7 |
4 files changed, 8 insertions, 8 deletions
diff --git a/board/BuR/brppt1/board.c b/board/BuR/brppt1/board.c index d2e7c72242..b8ab19c0e7 100644 --- a/board/BuR/brppt1/board.c +++ b/board/BuR/brppt1/board.c @@ -106,9 +106,8 @@ void am33xx_spl_board_init(void) /* setup I2C */ enable_i2c_pin_mux(); - i2c_set_bus_num(0); - i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); - pmicsetup(0); + + pmicsetup(0, 0); /* peripheral reset */ rc = gpio_request(64 + 29, "GPMC_WAIT1"); diff --git a/board/BuR/brxre1/board.c b/board/BuR/brxre1/board.c index 41ed28b4bc..82c53d5bc2 100644 --- a/board/BuR/brxre1/board.c +++ b/board/BuR/brxre1/board.c @@ -132,7 +132,7 @@ void am33xx_spl_board_init(void) puts("ERROR: i2c_set_bus_speed failed! (turn on PWR_nEN)\n"); } - pmicsetup(0); + pmicsetup(0, 0); } const struct dpll_params *get_dpll_ddr_params(void) diff --git a/board/BuR/common/bur_common.h b/board/BuR/common/bur_common.h index 5f2d0d055f..f743194c34 100644 --- a/board/BuR/common/bur_common.h +++ b/board/BuR/common/bur_common.h @@ -15,7 +15,7 @@ int load_lcdtiming(struct am335x_lcdpanel *panel); void br_summaryscreen(void); -void pmicsetup(u32 mpupll); +void pmicsetup(u32 mpupll, unsigned int bus); void enable_uart0_pin_mux(void); void enable_i2c_pin_mux(void); void enable_board_pin_mux(void); diff --git a/board/BuR/common/common.c b/board/BuR/common/common.c index f3eae5cbc1..a1f7c44abf 100644 --- a/board/BuR/common/common.c +++ b/board/BuR/common/common.c @@ -269,13 +269,14 @@ int ft_board_setup(void *blob, bd_t *bd) static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; -void pmicsetup(u32 mpupll) +void pmicsetup(u32 mpupll, unsigned int bus) { int mpu_vdd; int usb_cur_lim; - if (i2c_probe(TPS65217_CHIP_PM)) { - puts("PMIC (0x24) not found! skip further initalization.\n"); + if (power_tps65217_init(bus)) { + printf("WARN: cannot setup PMIC 0x24 @ bus #%d, not found!.\n", + bus); return; } |