arm: Remove at91rm9200ek boards

These boards have not been converted to CONFIG_DM_USB by the deadline
and is also missing conversion to CONFIG_DM.  Remove them.

Cc: Andreas Bießmann <andreas@biessmann.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

5 files changed, 0 insertions, 160 deletions

diff --git a/board/atmel/at91rm9200ek/Kconfig b/board/atmel/at91rm9200ek/Kconfig
deleted file mode 100644
index 952351dcdb..0000000000
--- a/board/atmel/at91rm9200ek/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_AT91RM9200EK
-
-config SYS_BOARD
-	default "at91rm9200ek"
-
-config SYS_VENDOR
-	default "atmel"
-
-config SYS_CONFIG_NAME
-	default "at91rm9200ek"
-
-endif
diff --git a/board/atmel/at91rm9200ek/MAINTAINERS b/board/atmel/at91rm9200ek/MAINTAINERS
deleted file mode 100644
index b25bc58029..0000000000
--- a/board/atmel/at91rm9200ek/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-AT91RM9200EK BOARD
-M:	Andreas Bießmann <andreas@biessmann.org>
-S:	Maintained
-F:	board/atmel/at91rm9200ek/
-F:	include/configs/at91rm9200ek.h
-F:	configs/at91rm9200ek_defconfig
-F:	configs/at91rm9200ek_ram_defconfig
diff --git a/board/atmel/at91rm9200ek/Makefile b/board/atmel/at91rm9200ek/Makefile
deleted file mode 100644
index 2d5c28082f..0000000000
--- a/board/atmel/at91rm9200ek/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-
-obj-y += at91rm9200ek.o
-obj-y += led.o
diff --git a/board/atmel/at91rm9200ek/at91rm9200ek.c b/board/atmel/at91rm9200ek/at91rm9200ek.c
deleted file mode 100644
index a314ced5e4..0000000000
--- a/board/atmel/at91rm9200ek/at91rm9200ek.c
+++ /dev/null
@@ -1,63 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2010 Andreas Bießmann <andreas@biessmann.org>
- *
- * derived from previous work
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- */
-
-#include <common.h>
-#include <init.h>
-#include <net.h>
-#include <netdev.h>
-#include <asm/global_data.h>
-#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_pio.h>
-#include <asm/arch/at91_common.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-int board_init(void)
-{
-	at91_pio_t *pio = (at91_pio_t *)AT91_PIO_BASE;
-
-	/*
-	 * Correct IRDA resistor problem
-	 * Set PA23_TXD in Output
-	 */
-	writel(ATMEL_PMX_AA_TXD2, &pio->pioa.oer);
-
-	/* arch number of AT91RM9200EK-Board */
-	gd->bd->bi_arch_number = MACH_TYPE_AT91RM9200EK;
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
-	return 0;
-}
-
-int board_early_init_f(void)
-{
-	at91_seriald_hw_init();
-	return 0;
-}
-
-int dram_init (void)
-{
-	/* dram_init must store complete ramsize in gd->ram_size */
-	gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
-			CONFIG_SYS_SDRAM_SIZE);
-	return 0;
-}
-
-#ifdef CONFIG_DRIVER_AT91EMAC
-int board_eth_init(struct bd_info *bis)
-{
-	return at91emac_register(bis, (u32) ATMEL_BASE_EMAC);
-}
-#endif
diff --git a/board/atmel/at91rm9200ek/led.c b/board/atmel/at91rm9200ek/led.c
deleted file mode 100644
index a6b4d1fb65..0000000000
--- a/board/atmel/at91rm9200ek/led.c
+++ /dev/null
@@ -1,71 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2006
- * Atmel Nordic AB <www.atmel.com>
- * Ulf Samuelsson <ulf@atmel.com>
- *
- * (C) Copyright 2010
- * Andreas Bießmann <andreas@biessmann.org>
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/at91_pio.h>
-#include <status_led.h>
-
-/* bit mask in PIO port B */
-#define	GREEN_LED	(1<<0)
-#define	YELLOW_LED	(1<<1)
-#define	RED_LED		(1<<2)
-
-void	green_led_on(void)
-{
-	at91_pio_t *pio = (at91_pio_t *)ATMEL_BASE_PIO;
-	writel(GREEN_LED, &pio->piob.codr);
-}
-
-void	 yellow_led_on(void)
-{
-	at91_pio_t *pio = (at91_pio_t *)ATMEL_BASE_PIO;
-	writel(YELLOW_LED, &pio->piob.codr);
-}
-
-void	 red_led_on(void)
-{
-	at91_pio_t *pio = (at91_pio_t *)ATMEL_BASE_PIO;
-	writel(RED_LED, &pio->piob.codr);
-}
-
-void	green_led_off(void)
-{
-	at91_pio_t *pio = (at91_pio_t *)ATMEL_BASE_PIO;
-	writel(GREEN_LED, &pio->piob.sodr);
-}
-
-void	yellow_led_off(void)
-{
-	at91_pio_t *pio = (at91_pio_t *)ATMEL_BASE_PIO;
-	writel(YELLOW_LED, &pio->piob.sodr);
-}
-
-void	red_led_off(void)
-{
-	at91_pio_t *pio = (at91_pio_t *)ATMEL_BASE_PIO;
-	writel(RED_LED, &pio->piob.sodr);
-}
-
-void coloured_LED_init (void)
-{
-	at91_pio_t *pio = (at91_pio_t *)ATMEL_BASE_PIO;
-
-	at91_periph_clk_enable(ATMEL_ID_PIOB);
-
-	/* Disable peripherals on LEDs */
-	writel(GREEN_LED | YELLOW_LED | RED_LED, &pio->piob.per);
-	/* Enable pins as outputs */
-	writel(GREEN_LED | YELLOW_LED | RED_LED, &pio->piob.oer);
-	/* Turn all LEDs OFF */
-	writel(GREEN_LED | YELLOW_LED | RED_LED, &pio->piob.sodr);
-}