diff options
| author | David Brownell <dbrownell@users.sourceforge.net> | 2009-05-16 01:48:37 +0400 |
|---|---|---|
| committer | Wolfgang Denk <wd@denx.de> | 2009-06-12 22:39:51 +0400 |
| commit | 28b00324becf3552134ae1e086509dc9c3d6e932 (patch) | |
| tree | 594dc834c42c982e1aa3b075018ebe8747e61ca3 /board/davinci/dm355evm/config.mk | |
| parent | 136cf92dc9e84c9a1bf567f1fe741092bf765495 (diff) | |
| download | u-boot-28b00324becf3552134ae1e086509dc9c3d6e932.tar.xz | |
dm355 evm support
Initial U-Boot support for the DaVinci DM355 EVM. This is a board
from Spectrum Digital. Board docs include schematic and firmware
for its microcontroller:
http://c6000.spectrumdigital.com/evmdm355/revd/
Most of the DM355 chip is fully documented by TI, the most notable
exception being the MPEG/JPEG coprocessor (programmable using codecs
available at no cost from TI), which is omitted from its DM335 sibling:
http://focus.ti.com/docs/prod/folders/print/tms320dm355.html
This version can boot from the on-board DM9000 Ethernet chip, after
being loaded (from NAND, MMC/SD, or UART). In the near future, NAND
and USB support could be added ... NAND support is being held back
until the support for the 4-bit ECC hardware is ready.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Diffstat (limited to 'board/davinci/dm355evm/config.mk')
| -rw-r--r-- | board/davinci/dm355evm/config.mk | 11 |
1 files changed, 11 insertions, 0 deletions
diff --git a/board/davinci/dm355evm/config.mk b/board/davinci/dm355evm/config.mk new file mode 100644 index 0000000000..c4e6e07b7c --- /dev/null +++ b/board/davinci/dm355evm/config.mk @@ -0,0 +1,11 @@ +# +# Spectrum Digital DM355 EVM board +# dm355evm board has 1 bank of 128 MB DDR RAM +# Physical Address: 8000'0000 to 8800'0000 +# +# Linux Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) +# + +#Provide at least 16MB spacing between us and the Linux Kernel image +TEXT_BASE = 0x81080000 |