diff options
| author | Igor Opaniuk <igor.opaniuk@foundries.io> | 2021-02-09 14:52:45 +0300 |
|---|---|---|
| committer | Heiko Schocher <hs@denx.de> | 2021-02-21 08:08:00 +0300 |
| commit | 2147a16983d17bcb0438607aa7760494afc27014 (patch) | |
| tree | 153470783919253c3a9bbcbc0e34b38c62f138f1 /board/freescale/common/vsc3316_3308.c | |
| parent | a907dce88e462251d96be9cdd72900543e4798df (diff) | |
| download | u-boot-2147a16983d17bcb0438607aa7760494afc27014.tar.xz | |
dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C/DM_I2C_GPIO
Use CONFIG_IS_ENABLED() macro, which provides more convenient
way to check $(SPL)DM_I2C/$(SPL)DM_I2C_GPIO configs
for both SPL and U-Boot proper.
CONFIG_IS_ENABLED(DM_I2C) expands to:
- 1 if CONFIG_SPL_BUILD is undefined and CONFIG_DM_I2C is set to 'y',
- 1 if CONFIG_SPL_BUILD is defined and CONFIG_SPL_DM_I2C is set to 'y',
- 0 otherwise.
All occurences were replaced automatically using these bash cmds:
$ find . -type f -exec sed -i
's/ifndef CONFIG_DM_I2C/if !CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
's/ifdef CONFIG_DM_I2C/if CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
's/defined(CONFIG_DM_I2C)/CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
's/ifndef CONFIG_DM_I2C_GPIO/if !CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +
$ find . -type f -exec sed -i
's/ifdef CONFIG_DM_I2C_GPIO/if CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +
$ find . -type f -exec sed -i
's/defined(CONFIG_DM_I2C_GPIO)/CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Diffstat (limited to 'board/freescale/common/vsc3316_3308.c')
| -rw-r--r-- | board/freescale/common/vsc3316_3308.c | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/board/freescale/common/vsc3316_3308.c b/board/freescale/common/vsc3316_3308.c index 8aceb8ef17..c51f3c5aca 100644 --- a/board/freescale/common/vsc3316_3308.c +++ b/board/freescale/common/vsc3316_3308.c @@ -34,7 +34,7 @@ int vsc_if_enable(unsigned int vsc_addr) /* enable 2-wire Serial InterFace (I2C) */ data = 0x02; -#ifdef CONFIG_DM_I2C +#if CONFIG_IS_ENABLED(DM_I2C) int ret, bus_num = 0; struct udevice *dev; @@ -62,7 +62,7 @@ int vsc3316_config(unsigned int vsc_addr, int8_t con_arr[][2], debug("VSC:Initializing VSC3316 at I2C address 0x%2x" " for Tx\n", vsc_addr); -#ifdef CONFIG_DM_I2C +#if CONFIG_IS_ENABLED(DM_I2C) int bus_num = 0; struct udevice *dev; @@ -185,7 +185,7 @@ int vsc3308_config_adjust(unsigned int vsc_addr, const int8_t con_arr[][2], debug("VSC:Initializing VSC3308 at I2C address 0x%x for Tx\n", vsc_addr); -#ifdef CONFIG_DM_I2C +#if CONFIG_IS_ENABLED(DM_I2C) int bus_num = 0; struct udevice *dev; @@ -385,7 +385,7 @@ int vsc3308_config(unsigned int vsc_addr, const int8_t con_arr[][2], debug("VSC:Initializing VSC3308 at I2C address 0x%x" " for Tx\n", vsc_addr); -#ifdef CONFIG_DM_I2C +#if CONFIG_IS_ENABLED(DM_I2C) int bus_num = 0; struct udevice *dev; @@ -509,7 +509,7 @@ void vsc_wp_config(unsigned int vsc_addr) /* For new crosspoint configuration to occur, WP bit of * CORE_CONFIG_REG should be set 1 and then reset to 0 */ -#ifdef CONFIG_DM_I2C +#if CONFIG_IS_ENABLED(DM_I2C) int ret, bus_num = 0; struct udevice *dev; |