ls1021aqds/ls1021aiot: Remove legacy non-DM_ETH code

Now that we are about to enable DM_ETH by default, remove legacy code.

Cc: Alison Wang <alison.wang@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

2 files changed, 0 insertions, 131 deletions

diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 7c93d30e1d..377c6aa077 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -41,7 +41,6 @@ obj-$(CONFIG_PQ_MDS_PIB)	+= pq-mds-pib.o
 ifndef CONFIG_SPL_BUILD
 obj-$(CONFIG_ID_EEPROM)	+= sys_eeprom.o
 endif
-obj-$(CONFIG_FSL_SGMII_RISER)	+= sgmii_riser.o
 ifndef CONFIG_RAMBOOT_PBL
 obj-$(CONFIG_FSL_FIXED_MMC_LOCATION)	+= sdhc_boot.o
 endif
diff --git a/board/freescale/common/sgmii_riser.c b/board/freescale/common/sgmii_riser.c
deleted file mode 100644
index 2315793010..0000000000
--- a/board/freescale/common/sgmii_riser.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * Freescale SGMII Riser Card
- *
- * This driver supports the SGMII Riser card found on the
- * "DS" style of development board from Freescale.
- *
- * This software may be used and distributed according to the
- * terms of the GNU Public License, Version 2, incorporated
- * herein by reference.
- *
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- */
-
-#include <config.h>
-#include <common.h>
-#include <log.h>
-#include <net.h>
-#include <linux/libfdt.h>
-#include <tsec.h>
-#include <fdt_support.h>
-
-void fsl_sgmii_riser_init(struct tsec_info_struct *tsec_info, int num)
-{
-	int i;
-
-	for (i = 0; i < num; i++)
-		if (tsec_info[i].flags & TSEC_SGMII)
-			tsec_info[i].phyaddr += SGMII_RISER_PHY_OFFSET;
-}
-
-void fsl_sgmii_riser_fdt_fixup(void *fdt)
-{
-	struct eth_device *dev;
-	int node;
-	int mdio_node;
-	int i = -1;
-	int etsec_num = 0;
-
-	node = fdt_path_offset(fdt, "/aliases");
-	if (node < 0)
-		return;
-
-	while ((dev = eth_get_dev_by_index(++i)) != NULL) {
-		struct tsec_private *priv;
-		int phy_node;
-		int enet_node;
-		uint32_t ph;
-		char sgmii_phy[16];
-		char enet[16];
-		const u32 *phyh;
-		const char *model;
-		const char *path;
-
-		if (!strstr(dev->name, "eTSEC"))
-			continue;
-
-		priv = dev->priv;
-		if (!(priv->flags & TSEC_SGMII)) {
-			etsec_num++;
-			continue;
-		}
-
-		mdio_node = fdt_node_offset_by_compatible(fdt, -1,
-				"fsl,gianfar-mdio");
-		if (mdio_node < 0)
-			return;
-
-		sprintf(sgmii_phy, "sgmii-phy@%d", etsec_num);
-		phy_node = fdt_subnode_offset(fdt, mdio_node, sgmii_phy);
-		if (phy_node > 0) {
-			fdt_increase_size(fdt, 32);
-			ph = fdt_create_phandle(fdt, phy_node);
-			if (!ph)
-				continue;
-		}
-
-		sprintf(enet, "ethernet%d", etsec_num++);
-		path = fdt_getprop(fdt, node, enet, NULL);
-		if (!path) {
-			debug("No alias for %s\n", enet);
-			continue;
-		}
-
-		enet_node = fdt_path_offset(fdt, path);
-		if (enet_node < 0)
-			continue;
-
-		model = fdt_getprop(fdt, enet_node, "model", NULL);
-
-		/*
-		 * We only want to do this to eTSECs.  On some platforms
-		 * there are more than one type of gianfar-style ethernet
-		 * controller, and as we are creating an implicit connection
-		 * between ethernet nodes and eTSEC devices, it is best to
-		 * make the connection use as much explicit information
-		 * as exists.
-		 */
-		if (!strstr(model, "TSEC"))
-			continue;
-
-		if (phy_node < 0) {
-			/*
-			 * This part is only for old device tree without
-			 * sgmii_phy nodes. It's kept just for compatible
-			 * reason. Soon to be deprecated if all device tree
-			 * get updated.
-			 */
-			phyh = fdt_getprop(fdt, enet_node, "phy-handle", NULL);
-			if (!phyh)
-				continue;
-
-			phy_node = fdt_node_offset_by_phandle(fdt,
-					fdt32_to_cpu(*phyh));
-
-			priv = dev->priv;
-
-			if (priv->flags & TSEC_SGMII)
-				fdt_setprop_cell(fdt, phy_node, "reg",
-						priv->phyaddr);
-		} else {
-			fdt_setprop(fdt, enet_node, "phy-handle", &ph,
-					sizeof(ph));
-			fdt_setprop_string(fdt, enet_node,
-					"phy-connection-type",
-					phy_string_for_interface(
-						PHY_INTERFACE_MODE_SGMII));
-		}
-	}
-}