diff options
| author | Igor Opaniuk <igor.opaniuk@foundries.io> | 2021-02-09 14:52:45 +0300 |
|---|---|---|
| committer | Heiko Schocher <hs@denx.de> | 2021-02-21 08:08:00 +0300 |
| commit | 2147a16983d17bcb0438607aa7760494afc27014 (patch) | |
| tree | 153470783919253c3a9bbcbc0e34b38c62f138f1 /board/freescale/ls1012ardb | |
| parent | a907dce88e462251d96be9cdd72900543e4798df (diff) | |
| download | u-boot-2147a16983d17bcb0438607aa7760494afc27014.tar.xz | |
dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C/DM_I2C_GPIO
Use CONFIG_IS_ENABLED() macro, which provides more convenient
way to check $(SPL)DM_I2C/$(SPL)DM_I2C_GPIO configs
for both SPL and U-Boot proper.
CONFIG_IS_ENABLED(DM_I2C) expands to:
- 1 if CONFIG_SPL_BUILD is undefined and CONFIG_DM_I2C is set to 'y',
- 1 if CONFIG_SPL_BUILD is defined and CONFIG_SPL_DM_I2C is set to 'y',
- 0 otherwise.
All occurences were replaced automatically using these bash cmds:
$ find . -type f -exec sed -i
's/ifndef CONFIG_DM_I2C/if !CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
's/ifdef CONFIG_DM_I2C/if CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
's/defined(CONFIG_DM_I2C)/CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
's/ifndef CONFIG_DM_I2C_GPIO/if !CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +
$ find . -type f -exec sed -i
's/ifdef CONFIG_DM_I2C_GPIO/if CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +
$ find . -type f -exec sed -i
's/defined(CONFIG_DM_I2C_GPIO)/CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Diffstat (limited to 'board/freescale/ls1012ardb')
| -rw-r--r-- | board/freescale/ls1012ardb/eth.c | 2 | ||||
| -rw-r--r-- | board/freescale/ls1012ardb/ls1012ardb.c | 12 |
2 files changed, 7 insertions, 7 deletions
diff --git a/board/freescale/ls1012ardb/eth.c b/board/freescale/ls1012ardb/eth.c index 2241d061dd..bb3fbc71ef 100644 --- a/board/freescale/ls1012ardb/eth.c +++ b/board/freescale/ls1012ardb/eth.c @@ -29,7 +29,7 @@ static inline void ls1012ardb_reset_phy(void) { #ifdef CONFIG_TARGET_LS1012ARDB /* Through reset IO expander reset both RGMII and SGMII PHYs */ -#ifdef CONFIG_DM_I2C +#if CONFIG_IS_ENABLED(DM_I2C) struct udevice *dev; int ret; diff --git a/board/freescale/ls1012ardb/ls1012ardb.c b/board/freescale/ls1012ardb/ls1012ardb.c index ed6dc9ff71..41bcf6f935 100644 --- a/board/freescale/ls1012ardb/ls1012ardb.c +++ b/board/freescale/ls1012ardb/ls1012ardb.c @@ -43,7 +43,7 @@ int checkboard(void) puts("Board: LS1012ARDB "); /* Initialize i2c early for Serial flash bank information */ -#if defined(CONFIG_DM_I2C) +#if CONFIG_IS_ENABLED(DM_I2C) struct udevice *dev; ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_IO_ADDR, @@ -195,7 +195,7 @@ int esdhc_status_fixup(void *blob, const char *compat) u8 io = 0; int ret, bus_num = 0; -#if defined(CONFIG_DM_I2C) +#if CONFIG_IS_ENABLED(DM_I2C) struct udevice *dev; ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_IO_ADDR, @@ -234,7 +234,7 @@ int esdhc_status_fixup(void *blob, const char *compat) * 10 - eMMC Memory * 11 - SPI */ -#if defined(CONFIG_DM_I2C) +#if CONFIG_IS_ENABLED(DM_I2C) ret = dm_i2c_read(dev, I2C_MUX_IO_0, &io, 1); #else ret = i2c_read(I2C_MUX_IO_ADDR, I2C_MUX_IO_0, 1, &io, 1); @@ -273,7 +273,7 @@ static int switch_to_bank1(void) u8 data = 0xf4, chip_addr = 0x24, offset_addr = 0x03; int ret, bus_num = 0; -#if defined(CONFIG_DM_I2C) +#if CONFIG_IS_ENABLED(DM_I2C) struct udevice *dev; ret = i2c_get_chip_for_busnum(bus_num, chip_addr, @@ -338,7 +338,7 @@ static int switch_to_bank2(void) u8 chip_addr = 0x24; int ret, i, bus_num = 0; -#if defined(CONFIG_DM_I2C) +#if CONFIG_IS_ENABLED(DM_I2C) struct udevice *dev; ret = i2c_get_chip_for_busnum(bus_num, chip_addr, @@ -361,7 +361,7 @@ static int switch_to_bank2(void) * CS routed to SPI memory bank2 */ for (i = 0; i < sizeof(data); i++) { -#if defined(CONFIG_DM_I2C) +#if CONFIG_IS_ENABLED(DM_I2C) ret = dm_i2c_write(dev, offset_addr[i], &data[i], 1); #else /* Non DM I2C support - will be removed */ ret = i2c_write(chip_addr, offset_addr[i], 1, &data[i], 1); |