diff options
author | Vladimir Oltean <vladimir.oltean@nxp.com> | 2021-09-18 15:32:34 +0300 |
---|---|---|
committer | Ramon Fried <rfried.dev@gmail.com> | 2021-09-28 18:50:56 +0300 |
commit | 77b11f7604162886f46e56011e790b7700f8cadd (patch) | |
tree | ab58a658085e4b2db03f2e5a76ddec06fa59a259 /board/freescale/ls1043ardb | |
parent | a17776be1dbe91684a9d0c60f623e9243e43fea9 (diff) | |
download | u-boot-77b11f7604162886f46e56011e790b7700f8cadd.tar.xz |
net: replace the "xfi" phy-mode with "10gbase-r"
As part of the effort of making U-Boot work with the same device tree as
Linux, there is an issue with the "xfi" phy-mode. To be precise, in
Linux there was a discussion (for those who have time to read:
https://lore.kernel.org/netdev/1576768881-24971-2-git-send-email-madalin.bucur@oss.nxp.com/)
which led to a patch:
https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=c114574ebfdf42f826776f717c8056a00fa94881
TL;DR: "xfi" was standardized in Linux as "10gbase-r".
This patch changes the relevant occurrences in U-Boot to use "10gbase-r"
instead of "xfi" wherever applicable.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Diffstat (limited to 'board/freescale/ls1043ardb')
-rw-r--r-- | board/freescale/ls1043ardb/README | 2 | ||||
-rw-r--r-- | board/freescale/ls1043ardb/eth.c | 2 |
2 files changed, 2 insertions, 2 deletions
diff --git a/board/freescale/ls1043ardb/README b/board/freescale/ls1043ardb/README index 709ddbbef3..66ee578e99 100644 --- a/board/freescale/ls1043ardb/README +++ b/board/freescale/ls1043ardb/README @@ -17,7 +17,7 @@ SoC overview. - PCI Express 2.0 with two PCIe connectors supporting: miniPCIe card and standard PCIe card - QSGMII with x4 RJ45 connector - - XFI with x1 RJ45 connector + - 10GBase-R with x1 RJ45 connector - DDR Controller - 2GB 32bits DDR4 SDRAM. Support rates of up to 1600MT/s -IFC/Local Bus diff --git a/board/freescale/ls1043ardb/eth.c b/board/freescale/ls1043ardb/eth.c index 1f01c15516..fa59116ce5 100644 --- a/board/freescale/ls1043ardb/eth.c +++ b/board/freescale/ls1043ardb/eth.c @@ -65,7 +65,7 @@ int board_eth_init(struct bd_info *bis) for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) fm_info_set_mdio(i, dev); - /* XFI on lane A, MAC 9 */ + /* 10GBase-R on lane A, MAC 9 */ fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR); dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME); fm_info_set_mdio(FM1_10GEC1, dev); |