diff options
author | Vladimir Oltean <vladimir.oltean@nxp.com> | 2021-09-18 15:32:34 +0300 |
---|---|---|
committer | Ramon Fried <rfried.dev@gmail.com> | 2021-09-28 18:50:56 +0300 |
commit | 77b11f7604162886f46e56011e790b7700f8cadd (patch) | |
tree | ab58a658085e4b2db03f2e5a76ddec06fa59a259 /board/freescale/ls1046aqds | |
parent | a17776be1dbe91684a9d0c60f623e9243e43fea9 (diff) | |
download | u-boot-77b11f7604162886f46e56011e790b7700f8cadd.tar.xz |
net: replace the "xfi" phy-mode with "10gbase-r"
As part of the effort of making U-Boot work with the same device tree as
Linux, there is an issue with the "xfi" phy-mode. To be precise, in
Linux there was a discussion (for those who have time to read:
https://lore.kernel.org/netdev/1576768881-24971-2-git-send-email-madalin.bucur@oss.nxp.com/)
which led to a patch:
https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=c114574ebfdf42f826776f717c8056a00fa94881
TL;DR: "xfi" was standardized in Linux as "10gbase-r".
This patch changes the relevant occurrences in U-Boot to use "10gbase-r"
instead of "xfi" wherever applicable.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Diffstat (limited to 'board/freescale/ls1046aqds')
-rw-r--r-- | board/freescale/ls1046aqds/README | 2 | ||||
-rw-r--r-- | board/freescale/ls1046aqds/eth.c | 4 |
2 files changed, 3 insertions, 3 deletions
diff --git a/board/freescale/ls1046aqds/README b/board/freescale/ls1046aqds/README index b8fa32652b..d6469019bd 100644 --- a/board/freescale/ls1046aqds/README +++ b/board/freescale/ls1046aqds/README @@ -18,7 +18,7 @@ SoC overview. - SGMII, SGMII 2.5 - QSGMII - SATA 3.0 - - XFI + - 10GBase-R - DDR Controller - 8GB 64bits DDR4 SDRAM. Support rates of up to 2133MT/s -IFC/Local Bus diff --git a/board/freescale/ls1046aqds/eth.c b/board/freescale/ls1046aqds/eth.c index 33db552adb..2352832466 100644 --- a/board/freescale/ls1046aqds/eth.c +++ b/board/freescale/ls1046aqds/eth.c @@ -217,13 +217,13 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, /* Backplane KR mode: skip fixups */ printf("Interface %d in backplane KR mode\n", port); } else { - /* XFI interface */ + /* 10GBase-R interface */ f_link.phy_id = cpu_to_fdt32(port); f_link.duplex = cpu_to_fdt32(1); f_link.link_speed = cpu_to_fdt32(10000); f_link.pause = 0; f_link.asym_pause = 0; - /* no PHY for XFI */ + /* no PHY for 10GBase-R */ fdt_delprop(fdt, offset, "phy-handle"); fdt_setprop(fdt, offset, "fixed-link", &f_link, sizeof(f_link)); |