diff options
| author | Ashish Kumar <Ashish.Kumar@nxp.com> | 2017-08-31 13:42:55 +0300 |
|---|---|---|
| committer | York Sun <york.sun@nxp.com> | 2017-09-11 18:01:05 +0300 |
| commit | 7769776a603f76ab1b7c1478f6cf8388b3cb5464 (patch) | |
| tree | ac709dd1fcb4185bb2ed865bb61c975be29e0ec0 /board/freescale/ls1088a/README | |
| parent | e84a324ba7950e88c0df4a2c656f533c723aeaae (diff) | |
| download | u-boot-7769776a603f76ab1b7c1478f6cf8388b3cb5464.tar.xz | |
armv8: ls1088aqds: Add support of LS1088AQDS
This patch add support of LS1088AQDS platform.
The LS1088A QorIQTM Development System (QDS) is a high-performance
computing, evaluation, and development platform that supports the
LS1088A QorIQ Architecture processor.
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Diffstat (limited to 'board/freescale/ls1088a/README')
| -rw-r--r-- | board/freescale/ls1088a/README | 79 |
1 files changed, 79 insertions, 0 deletions
diff --git a/board/freescale/ls1088a/README b/board/freescale/ls1088a/README index 3f4d987631..aa0fb6ac67 100644 --- a/board/freescale/ls1088a/README +++ b/board/freescale/ls1088a/README @@ -64,3 +64,82 @@ Alternately you can use this command to switch from QSPI to SD - JTAG support - QSPI emulator support - TDM riser support + +QDS Default Switch Settings (1: ON; 0: OFF) +------------------------------------------- + +For 16b IFC-NOR +SW1 0001 0010 +SW2 x110 1111 + +For QSPI Boot +SW1 0011 0001 +SW2 0110 1111 + +For SD Boot +SW1 0010 0000 +SW2 0110 1111 + +For eMMC Boot +SW1 0010 0000 +SW2 1110 1111 + +For I2C (ext. addr.) +SW1 0010 0100 +SW2 1110 1111 + +SW3 to SW12 are identical for all boot source + +SW3 0010 0100 +SW4 0010 0000 +SW5 1110 0111 +SW6 1110 1000 +SW7 0001 1101 +SW8 0000 1101 +SW9 1100 1010 +SW10 1110 1000 +SW11 1111 0100 +SW12 1111 1111 + + LS1088AQDS board Overview + ------------------------- + - SERDES Connections, 16 lanes supporting: + - PCI Express - 3.0 + - SATA 3.0 + - 2 XFI + - QSGMII, SGMII with help for Riser card + - 2 RGMII + - 5 slot for Riser card or PCIe NIC + - DDR Controller + - One ports of 72-bits (8-bits ECC, 64-bits DATA) DDR4. Each port supports four + chip-selects on one DIMM connector. Support is up to 2133MT/s, Although MAX default + with FSL refernce software is 2100MT/s + - 2 QSPI-NOR Spansion(S25FS512SDSMFI011) flash of size 64MB + - IFC/Local Bus + - One 2 GB NAND flash with ECC support, not as boot source + - CPLD of size 2K + - USB 3.0 + - Two high speed USB 3.0 ports + - First USB 3.0 port configured as Host with Type-A connector + - Second USB 3.0 port configured as OTG with micro-AB connector + - SDHC/eMMC + - SDHC/eMMC slot via adaptor + - 4 I2C controllers + - Two SATA onboard connectors + - 2 UART + - JTAG support + - DSPI + - PROMJET support + - QSPI emulator support + - TDM riser support + +QSPI flash memory map valid for both QDS and RDB + Image Flash Offset + RCW+PBI 0x00000000 + Boot firmware (U-Boot) 0x00100000 + Boot firmware Environment 0x00300000 + PPA firmware 0x00400000 + DPAA2 MC 0x00A00000 + DPAA2 DPL 0x00D00000 + DPAA2 DPC 0x00E00000 + Kernel.itb 0x01000000 |