diff options
author | Vladimir Oltean <vladimir.oltean@nxp.com> | 2021-09-18 15:32:34 +0300 |
---|---|---|
committer | Ramon Fried <rfried.dev@gmail.com> | 2021-09-28 18:50:56 +0300 |
commit | 77b11f7604162886f46e56011e790b7700f8cadd (patch) | |
tree | ab58a658085e4b2db03f2e5a76ddec06fa59a259 /board/freescale/ls2080ardb | |
parent | a17776be1dbe91684a9d0c60f623e9243e43fea9 (diff) | |
download | u-boot-77b11f7604162886f46e56011e790b7700f8cadd.tar.xz |
net: replace the "xfi" phy-mode with "10gbase-r"
As part of the effort of making U-Boot work with the same device tree as
Linux, there is an issue with the "xfi" phy-mode. To be precise, in
Linux there was a discussion (for those who have time to read:
https://lore.kernel.org/netdev/1576768881-24971-2-git-send-email-madalin.bucur@oss.nxp.com/)
which led to a patch:
https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=c114574ebfdf42f826776f717c8056a00fa94881
TL;DR: "xfi" was standardized in Linux as "10gbase-r".
This patch changes the relevant occurrences in U-Boot to use "10gbase-r"
instead of "xfi" wherever applicable.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Diffstat (limited to 'board/freescale/ls2080ardb')
-rw-r--r-- | board/freescale/ls2080ardb/README | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/board/freescale/ls2080ardb/README b/board/freescale/ls2080ardb/README index 205c45cb2a..75a633ccb4 100644 --- a/board/freescale/ls2080ardb/README +++ b/board/freescale/ls2080ardb/README @@ -18,7 +18,7 @@ LS2081A, LS2088A SoC overview. - SERDES Connections, 16 lanes supporting: - PCI Express - 3.0 - SATA 3.0 - - XFI + - 10GBase-R - DDR Controller - Two ports of 72-bits (8-bits ECC) DDR4. Each port supports four chip-selects and two DIMM connectors. Support is up to 2133MT/s. |