diff options
| author | Peng Fan <peng.fan@nxp.com> | 2018-01-02 04:32:09 +0300 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2018-01-12 16:28:04 +0300 |
| commit | e80f9e1a37c4136299c6ea42da7c6b2fdb1eab2d (patch) | |
| tree | 0d8bfc3444682df5d3c74c2e82aaf520fd1a0048 /board/freescale/mx6sxsabresd | |
| parent | 5dfc9d3766ee74f3711747a5fc9fa763ae82747c (diff) | |
| download | u-boot-e80f9e1a37c4136299c6ea42da7c6b2fdb1eab2d.tar.xz | |
imx: mx6sxsabresd: config wdog pinmux
Because kernel set WDOG_B mux before pad with the common pinctrl
framwork now and wdog reset will be triggered once set WDOG_B mux
with default pad setting, we set pad setting here to workaround this.
Since imx_iomux_v3_setup_pad also set mux before pad setting, we set
as GPIO mux firstly here to workaround it.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Diffstat (limited to 'board/freescale/mx6sxsabresd')
| -rw-r--r-- | board/freescale/mx6sxsabresd/mx6sxsabresd.c | 15 |
1 files changed, 15 insertions, 0 deletions
diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c index 8940f37208..34371ad34a 100644 --- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c +++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c @@ -50,6 +50,9 @@ DECLARE_GLOBAL_DATA_PTR; #define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \ PAD_CTL_PKE | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm) +#define WDOG_PAD_CTRL (PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm) + int dram_init(void) { gd->ram_size = imx_ddr_size(); @@ -62,6 +65,9 @@ static iomux_v3_cfg_t const uart1_pads[] = { MX6_PAD_GPIO1_IO05__UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL), }; +static iomux_v3_cfg_t const wdog_b_pad = { + MX6_PAD_GPIO1_IO13__GPIO1_IO_13 | MUX_PAD_CTRL(WDOG_PAD_CTRL), +}; static iomux_v3_cfg_t const fec1_pads[] = { MX6_PAD_ENET1_MDC__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6_PAD_ENET1_MDIO__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), @@ -295,6 +301,15 @@ int board_init(void) /* Address of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + /* + * Because kernel set WDOG_B mux before pad with the common pinctrl + * framwork now and wdog reset will be triggered once set WDOG_B mux + * with default pad setting, we set pad setting here to workaround this. + * Since imx_iomux_v3_setup_pad also set mux before pad setting, we set + * as GPIO mux firstly here to workaround it. + */ + imx_iomux_v3_setup_pad(wdog_b_pad); + /* Active high for ncp692 */ gpio_request(IMX_GPIO_NR(4, 16), "ncp692_en"); gpio_direction_output(IMX_GPIO_NR(4, 16), 1); |