diff options
author | Fabio Estevam <fabio.estevam@freescale.com> | 2015-09-08 20:43:12 +0300 |
---|---|---|
committer | Stefano Babic <sbabic@denx.de> | 2015-09-13 11:54:37 +0300 |
commit | d6be30fe95279f2e00a8df54da3a143d1ca594a6 (patch) | |
tree | 63e1c60cb65eeadc31a2633206447455b8e98c9b /board/freescale/mx6ul_14x14_evk | |
parent | 4189947de4a8ed50772981c860b7d43b4e04ea97 (diff) | |
download | u-boot-d6be30fe95279f2e00a8df54da3a143d1ca594a6.tar.xz |
mx6ul_14x14_evk: Add a README file
Add a README file to help users getting started with the board.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Diffstat (limited to 'board/freescale/mx6ul_14x14_evk')
-rw-r--r-- | board/freescale/mx6ul_14x14_evk/README | 32 |
1 files changed, 32 insertions, 0 deletions
diff --git a/board/freescale/mx6ul_14x14_evk/README b/board/freescale/mx6ul_14x14_evk/README new file mode 100644 index 0000000000..d48c7ba20f --- /dev/null +++ b/board/freescale/mx6ul_14x14_evk/README @@ -0,0 +1,32 @@ +How to use U-boot on Freescale MX6UL 14x14 EVK +----------------------------------------------- + +- Build U-boot for MX6UL 14x14 EVK: + +$ make mrproper +$ make mx6ul_14x14_evk_defconfig +$ make + +This will generate the SPL image called SPL and the u-boot.img. + +- Flash the SPL image into the micro SD card: + +sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync + +- Flash the u-boot.img image into the micro SD card: + +sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync + +- Jumper settings: + +SW601: 0 0 1 0 +Sw602: 1 0 + +where 0 means bottom position and 1 means top position (from the +switch label numbers reference). + +- Connect the USB cable between the EVK and the PC for the console. +(The USB console connector is the one close the push buttons) + +- Insert the micro SD card in the board, power it up and U-boot messages should +come up. |