diff options
| author | Igor Opaniuk <igor.opaniuk@foundries.io> | 2021-02-09 14:52:45 +0300 |
|---|---|---|
| committer | Heiko Schocher <hs@denx.de> | 2021-02-21 08:08:00 +0300 |
| commit | 2147a16983d17bcb0438607aa7760494afc27014 (patch) | |
| tree | 153470783919253c3a9bbcbc0e34b38c62f138f1 /board/freescale/p1010rdb | |
| parent | a907dce88e462251d96be9cdd72900543e4798df (diff) | |
| download | u-boot-2147a16983d17bcb0438607aa7760494afc27014.tar.xz | |
dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C/DM_I2C_GPIO
Use CONFIG_IS_ENABLED() macro, which provides more convenient
way to check $(SPL)DM_I2C/$(SPL)DM_I2C_GPIO configs
for both SPL and U-Boot proper.
CONFIG_IS_ENABLED(DM_I2C) expands to:
- 1 if CONFIG_SPL_BUILD is undefined and CONFIG_DM_I2C is set to 'y',
- 1 if CONFIG_SPL_BUILD is defined and CONFIG_SPL_DM_I2C is set to 'y',
- 0 otherwise.
All occurences were replaced automatically using these bash cmds:
$ find . -type f -exec sed -i
's/ifndef CONFIG_DM_I2C/if !CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
's/ifdef CONFIG_DM_I2C/if CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
's/defined(CONFIG_DM_I2C)/CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
's/ifndef CONFIG_DM_I2C_GPIO/if !CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +
$ find . -type f -exec sed -i
's/ifdef CONFIG_DM_I2C_GPIO/if CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +
$ find . -type f -exec sed -i
's/defined(CONFIG_DM_I2C_GPIO)/CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
Diffstat (limited to 'board/freescale/p1010rdb')
| -rw-r--r-- | board/freescale/p1010rdb/p1010rdb.c | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/board/freescale/p1010rdb/p1010rdb.c b/board/freescale/p1010rdb/p1010rdb.c index 7e007da87c..90436337df 100644 --- a/board/freescale/p1010rdb/p1010rdb.c +++ b/board/freescale/p1010rdb/p1010rdb.c @@ -141,7 +141,7 @@ int config_board_mux(int ctrl_type) ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); u8 tmp; -#ifdef CONFIG_DM_I2C +#if CONFIG_IS_ENABLED(DM_I2C) struct udevice *dev; int ret; #if defined(CONFIG_TARGET_P1010RDB_PA) @@ -377,7 +377,7 @@ int i2c_pca9557_read(int type) u8 val; int bus_num = I2C_PCA9557_BUS_NUM; -#ifdef CONFIG_DM_I2C +#if CONFIG_IS_ENABLED(DM_I2C) struct udevice *dev; int ret; @@ -419,7 +419,7 @@ int checkboard(void) printf("Board: %sRDB-PA, ", cpu->name); #elif defined(CONFIG_TARGET_P1010RDB_PB) printf("Board: %sRDB-PB, ", cpu->name); -#ifdef CONFIG_DM_I2C +#if CONFIG_IS_ENABLED(DM_I2C) struct udevice *dev; int ret; @@ -462,7 +462,7 @@ int checkboard(void) case 0xe: puts("SDHC\n"); val = 0x60; /* set pca9557 pin input/output */ -#ifdef CONFIG_DM_I2C +#if CONFIG_IS_ENABLED(DM_I2C) dm_i2c_write(dev, 3, &val, 1); #else i2c_write(I2C_PCA9557_ADDR2, 3, 1, &val, 1); |