diff options
| author | Yangbo Lu <yangbo.lu@nxp.com> | 2020-06-17 13:08:58 +0300 |
|---|---|---|
| committer | Priyanka Jain <priyanka.jain@nxp.com> | 2020-07-27 11:46:28 +0300 |
| commit | 39913acedd673c815af06da8dc3ef04c6e674d4a (patch) | |
| tree | 5efe60be8d831262b5ff2622d36ac089106c1118 /board/freescale/t208xqds | |
| parent | 4f73897b99cba1c051f4f5ed8a0e77619dedf8d6 (diff) | |
| download | u-boot-39913acedd673c815af06da8dc3ef04c6e674d4a.tar.xz | |
Move eSDHC adapter card identification to board files
The eSDHC adapter card identification and multiplexing configuration
through FPGA had been implemented in both common mmc driver and
fsl_esdhc driver. However it is proper to move these code to board
files and do it during board initialization. The FPGA registers are
also board specific.
This patch is to move eSDHC adapter card identification and
multiplexing configuration from mmc driver to specific board files.
And the option CONFIG_FSL_ESDHC_ADAPTER_IDENT is no longer needed.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
[Rebased, Removed T1040QDS change as board does not exist]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Diffstat (limited to 'board/freescale/t208xqds')
| -rw-r--r-- | board/freescale/t208xqds/t208xqds.c | 29 |
1 files changed, 28 insertions, 1 deletions
diff --git a/board/freescale/t208xqds/t208xqds.c b/board/freescale/t208xqds/t208xqds.c index 1dbfd493a2..f3af8d5292 100644 --- a/board/freescale/t208xqds/t208xqds.c +++ b/board/freescale/t208xqds/t208xqds.c @@ -345,6 +345,33 @@ int brd_mux_lane_to_slot(void) return 0; } +static void esdhc_adapter_card_ident(void) +{ + u8 card_id, value; + + card_id = QIXIS_READ(present) & QIXIS_SDID_MASK; + + switch (card_id) { + case QIXIS_ESDHC_ADAPTER_TYPE_EMMC45: + value = QIXIS_READ(brdcfg[5]); + value |= (QIXIS_DAT4 | QIXIS_DAT5_6_7); + QIXIS_WRITE(brdcfg[5], value); + break; + case QIXIS_ESDHC_ADAPTER_TYPE_SDMMC_LEGACY: + value = QIXIS_READ(pwr_ctl[1]); + value |= QIXIS_EVDD_BY_SDHC_VS; + QIXIS_WRITE(pwr_ctl[1], value); + break; + case QIXIS_ESDHC_ADAPTER_TYPE_EMMC44: + value = QIXIS_READ(brdcfg[5]); + value |= (QIXIS_SDCLKIN | QIXIS_SDCLKOUT); + QIXIS_WRITE(brdcfg[5], value); + break; + default: + break; + } +} + int board_early_init_r(void) { const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; @@ -384,7 +411,7 @@ int board_early_init_r(void) brd_mux_lane_to_slot(); select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0); - + esdhc_adapter_card_ident(); return 0; } |