diff options
author | Dirk Eibach <dirk.eibach@gdsys.cc> | 2019-03-29 12:18:19 +0300 |
---|---|---|
committer | Mario Six <mario.six@gdsys.cc> | 2019-05-21 09:03:38 +0300 |
commit | d494cdb97e18a30214d0414376d4eacdf82224fe (patch) | |
tree | 8b54e8bd5c092952d5bb55f44dd2d3ca93e7a143 /board/gdsys | |
parent | d85c385332b7f9bf0491c7fc201ef6abf0b66938 (diff) | |
download | u-boot-d494cdb97e18a30214d0414376d4eacdf82224fe.tar.xz |
mpc83xx: Add gazerbeam board
The gdsys gazerbeam board is based on a Freescale MPC8308 SOC.
It boots from NOR-Flash, kernel and rootfs are stored on
SD-Card.
On board peripherals include:
- 2x 10/100 Mbit/s Ethernet (optional)
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Diffstat (limited to 'board/gdsys')
-rw-r--r-- | board/gdsys/common/Makefile | 1 | ||||
-rw-r--r-- | board/gdsys/mpc8308/Kconfig | 29 | ||||
-rw-r--r-- | board/gdsys/mpc8308/MAINTAINERS | 2 | ||||
-rw-r--r-- | board/gdsys/mpc8308/Makefile | 1 | ||||
-rw-r--r-- | board/gdsys/mpc8308/gazerbeam.c | 179 |
5 files changed, 211 insertions, 1 deletions
diff --git a/board/gdsys/common/Makefile b/board/gdsys/common/Makefile index ff8d6f4966..7dfe104561 100644 --- a/board/gdsys/common/Makefile +++ b/board/gdsys/common/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_TARGET_STRIDER) += mclink.o dp501.o phy.o ioep-fpga.o adv7611.o ch7 obj-$(CONFIG_TARGET_STRIDER) += fanctrl.o obj-$(CONFIG_STRIDER_CON) += osd.o obj-$(CONFIG_STRIDER_CON_DP) += osd.o +obj-$(CONFIG_TARGET_GAZERBEAM) += osd.o ihs_mdio.o ioep-fpga.o ifdef CONFIG_OSD obj-$(CONFIG_GDSYS_LEGACY_OSD_CMDS) += osd_cmd.o diff --git a/board/gdsys/mpc8308/Kconfig b/board/gdsys/mpc8308/Kconfig index e6a4796054..30811889fb 100644 --- a/board/gdsys/mpc8308/Kconfig +++ b/board/gdsys/mpc8308/Kconfig @@ -71,7 +71,28 @@ config GDSYS_LEGACY_DRIVERS endif -if TARGET_HRCON || TARGET_STRIDER +if TARGET_GAZERBEAM + +config SYS_BOARD + default "mpc8308" + +config SYS_VENDOR + default "gdsys" + +config SYS_CONFIG_NAME + default "gazerbeam" + +config SYS_FPGA1_BASE + default E0700000 + +config SYS_FPGA1_SIZE + default 1 + +config GDSYS_LEGACY_OSD_CMDS + default y +endif + +if TARGET_HRCON || TARGET_STRIDER || TARGET_GAZERBEAM choice prompt "FPGA flavor selection" @@ -89,6 +110,12 @@ config SYS_FPGA_FLAVOR_GAZERBEAM endchoice +config EXTENDED_FEATURES + bool "FPGA extended features" + depends on GDSYS_LEGACY_DRIVERS + help + Enable support for the extended features field of the IHS FPGA. + config CMD_IOLOOP bool "Enable 'ioloop' and 'ioreflect' commands" help diff --git a/board/gdsys/mpc8308/MAINTAINERS b/board/gdsys/mpc8308/MAINTAINERS index 755b9a2385..ed1b6fa106 100644 --- a/board/gdsys/mpc8308/MAINTAINERS +++ b/board/gdsys/mpc8308/MAINTAINERS @@ -6,7 +6,9 @@ F: include/configs/hrcon.h F: configs/hrcon_defconfig F: configs/hrcon_dh_defconfig F: include/configs/strider.h +F: configs/strider_defconfig F: configs/strider_cpu_defconfig F: configs/strider_cpu_dp_defconfig F: configs/strider_con_defconfig F: configs/strider_con_dp_defconfig +F: configs/gazerbeam_defconfig diff --git a/board/gdsys/mpc8308/Makefile b/board/gdsys/mpc8308/Makefile index dc579479f9..9af5fe04d1 100644 --- a/board/gdsys/mpc8308/Makefile +++ b/board/gdsys/mpc8308/Makefile @@ -6,3 +6,4 @@ obj-y := mpc8308.o sdram.o obj-$(CONFIG_TARGET_HRCON) += hrcon.o obj-$(CONFIG_TARGET_STRIDER) += strider.o +obj-$(CONFIG_TARGET_GAZERBEAM) += gazerbeam.o diff --git a/board/gdsys/mpc8308/gazerbeam.c b/board/gdsys/mpc8308/gazerbeam.c new file mode 100644 index 0000000000..cd621744d2 --- /dev/null +++ b/board/gdsys/mpc8308/gazerbeam.c @@ -0,0 +1,179 @@ +/* + * (C) Copyright 2015 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <board.h> +#include <dm.h> +#include <fdt_support.h> +#include <fsl_esdhc.h> +#include <miiphy.h> +#include <misc.h> +#include <tpm-v1.h> +#include <video_osd.h> + +#include "../common/ihs_mdio.h" +#include "../../../drivers/board/gazerbeam.h" + +DECLARE_GLOBAL_DATA_PTR; + +struct ihs_mdio_info ihs_mdio_info[] = { + { .fpga = NULL, .name = "ihs0", .base = 0x58 }, + { .fpga = NULL, .name = "ihs1", .base = 0x58 }, +}; + +static int get_tpm(struct udevice **devp) +{ + int rc; + + rc = uclass_first_device_err(UCLASS_TPM, devp); + if (rc) { + printf("Could not find TPM (ret=%d)\n", rc); + return CMD_RET_FAILURE; + } + + return 0; +} + +int board_early_init_r(void) +{ + struct udevice *board; + struct udevice *serdes; + int mc = 0; + int con = 0; + + if (board_get(&board)) + puts("Could not find board information device.\n"); + + /* Initialize serdes */ + uclass_get_device_by_phandle(UCLASS_MISC, board, "serdes", &serdes); + + if (board_detect(board)) + puts("Device information detection failed.\n"); + + board_get_int(board, BOARD_MULTICHANNEL, &mc); + board_get_int(board, BOARD_VARIANT, &con); + + if (mc == 2 || mc == 1) + dev_disable_by_path("/immr@e0000000/i2c@3100/pca9698@22"); + + if (mc == 4) { + dev_disable_by_path("/immr@e0000000/i2c@3100/pca9698@20"); + dev_enable_by_path("/localbus@e0005000/iocon_uart@2,0"); + dev_enable_by_path("/fpga1bus"); + } + + if (mc == 2 || con == VAR_CON) { + dev_enable_by_path("/fpga0bus/fpga0_video1"); + dev_enable_by_path("/fpga0bus/fpga0_iic_video1"); + dev_enable_by_path("/fpga0bus/fpga0_axi_video1"); + } + + if (con == VAR_CON) { + dev_enable_by_path("/fpga0bus/fpga0_video0"); + dev_enable_by_path("/fpga0bus/fpga0_iic_video0"); + dev_enable_by_path("/fpga0bus/fpga0_axi_video0"); + } + + return 0; +} + +int checkboard(void) +{ + struct udevice *board; + char *s = env_get("serial#"); + int mc = 0; + int con = 0; + + if (board_get(&board)) + puts("Could not find board information device.\n"); + + board_get_int(board, BOARD_MULTICHANNEL, &mc); + board_get_int(board, BOARD_VARIANT, &con); + + puts("Board: Gazerbeam "); + printf("%s ", mc == 4 ? "MC4" : mc == 2 ? "MC2" : "SC"); + printf("%s", con == VAR_CON ? "CON" : "CPU"); + + if (s) { + puts(", serial# "); + puts(s); + } + + puts("\n"); + + return 0; +} + +static void display_osd_info(struct udevice *osd, + struct video_osd_info *osd_info) +{ + printf("OSD-%s: Digital-OSD version %01d.%02d, %d x %d characters\n", + osd->name, osd_info->major_version, osd_info->minor_version, + osd_info->width, osd_info->height); +} + +int last_stage_init(void) +{ + int fpga_hw_rev = 0; + int i; + struct udevice *board; + struct udevice *osd; + struct video_osd_info osd_info; + struct udevice *tpm; + int ret; + + if (board_get(&board)) + puts("Could not find board information device.\n"); + + if (board) { + int res = board_get_int(board, BOARD_HWVERSION, &fpga_hw_rev); + + if (res) + printf("Could not determind FPGA HW revision (res = %d)\n", res); + } + + env_set_ulong("fpga_hw_rev", fpga_hw_rev); + + ret = get_tpm(&tpm); + if (ret || tpm_init(tpm) || tpm_startup(tpm, TPM_ST_CLEAR) || + tpm_continue_self_test(tpm)) { + printf("TPM init failed\n"); + } + + if (fpga_hw_rev >= 4) { + for (i = 0; i < 4; i++) { + struct udevice *rxaui; + char name[8]; + + snprintf(name, sizeof(name), "rxaui%d", i); + /* Disable RXAUI polarity inversion */ + ret = uclass_get_device_by_phandle(UCLASS_MISC, board, name, &rxaui); + if (!ret) + misc_set_enabled(rxaui, false); + } + } + + for (uclass_first_device(UCLASS_VIDEO_OSD, &osd); + osd; + uclass_next_device(&osd)) { + video_osd_get_info(osd, &osd_info); + display_osd_info(osd, &osd_info); + } + + return 0; +} + +#if defined(CONFIG_OF_BOARD_SETUP) +int ft_board_setup(void *blob, bd_t *bd) +{ + ft_cpu_setup(blob, bd); + fsl_fdt_fixup_dr_usb(blob, bd); + fdt_fixup_esdhc(blob, bd); + + return 0; +} +#endif |