sh: Remove sh7753evb board

This board has not been converted to CONFIG_DM by the deadline of v2020.01
and is missing other conversions which depend on this as well.  Remove it.

Signed-off-by: Tom Rini <trini@konsulko.com>

1 files changed, 0 insertions, 329 deletions

diff --git a/board/renesas/sh7753evb/sh7753evb.c b/board/renesas/sh7753evb/sh7753evb.c
deleted file mode 100644
index f34dec1dfa..0000000000
--- a/board/renesas/sh7753evb/sh7753evb.c
+++ /dev/null
@@ -1,329 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2012  Renesas Solutions Corp.
- */
-
-#include <common.h>
-#include <command.h>
-#include <env.h>
-#include <flash.h>
-#include <init.h>
-#include <malloc.h>
-#include <net.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/mmc.h>
-#include <spi.h>
-#include <spi_flash.h>
-#include <linux/delay.h>
-
-int checkboard(void)
-{
-	puts("BOARD: SH7753 EVB\n");
-
-	return 0;
-}
-
-static void init_gpio(void)
-{
-	struct gpio_regs *gpio = GPIO_BASE;
-	struct sermux_regs *sermux = SERMUX_BASE;
-
-	/* GPIO */
-	writew(0x0000, &gpio->pacr);	/* GETHER */
-	writew(0x0001, &gpio->pbcr);	/* INTC */
-	writew(0x0000, &gpio->pccr);	/* PWMU, INTC */
-	writew(0x0000, &gpio->pdcr);	/* SPI0 */
-	writew(0xeaff, &gpio->pecr);	/* GPIO */
-	writew(0x0000, &gpio->pfcr);	/* WDT */
-	writew(0x0004, &gpio->pgcr);	/* SPI0, GETHER MDIO gate(PTG1) */
-	writew(0x0000, &gpio->phcr);	/* SPI1 */
-	writew(0x0000, &gpio->picr);	/* SDHI */
-	writew(0x0000, &gpio->pjcr);	/* SCIF4 */
-	writew(0x0003, &gpio->pkcr);	/* SerMux */
-	writew(0x0000, &gpio->plcr);	/* SerMux */
-	writew(0x0000, &gpio->pmcr);	/* RIIC */
-	writew(0x0000, &gpio->pncr);	/* USB, SGPIO */
-	writew(0x0000, &gpio->pocr);	/* SGPIO */
-	writew(0xd555, &gpio->pqcr);	/* GPIO */
-	writew(0x0000, &gpio->prcr);	/* RIIC */
-	writew(0x0000, &gpio->pscr);	/* RIIC */
-	writew(0x0000, &gpio->ptcr);	/* STATUS */
-	writeb(0x00, &gpio->pudr);
-	writew(0x5555, &gpio->pucr);	/* Debug LED */
-	writew(0x0000, &gpio->pvcr);	/* RSPI */
-	writew(0x0000, &gpio->pwcr);	/* EVC */
-	writew(0x0000, &gpio->pxcr);	/* LBSC */
-	writew(0x0000, &gpio->pycr);	/* LBSC */
-	writew(0x0000, &gpio->pzcr);	/* eMMC */
-	writew(0xfe00, &gpio->psel0);
-	writew(0x0000, &gpio->psel1);
-	writew(0x3000, &gpio->psel2);
-	writew(0xff00, &gpio->psel3);
-	writew(0x771f, &gpio->psel4);
-	writew(0x0ffc, &gpio->psel5);
-	writew(0x00ff, &gpio->psel6);
-	writew(0xfc00, &gpio->psel7);
-
-	writeb(0x10, &sermux->smr0);	/* SMR0: SerMux mode 0 */
-}
-
-static void init_usb_phy(void)
-{
-	struct usb_common_regs *common0 = USB0_COMMON_BASE;
-	struct usb_common_regs *common1 = USB1_COMMON_BASE;
-	struct usb0_phy_regs *phy = USB0_PHY_BASE;
-	struct usb1_port_regs *port = USB1_PORT_BASE;
-	struct usb1_alignment_regs *align = USB1_ALIGNMENT_BASE;
-
-	writew(0x0100, &phy->reset);		/* set reset */
-	/* port0 = USB0, port1 = USB1 */
-	writew(0x0002, &phy->portsel);
-	writel(0x0001, &port->port1sel);	/* port1 = Host */
-	writew(0x0111, &phy->reset);		/* clear reset */
-
-	writew(0x4000, &common0->suspmode);
-	writew(0x4000, &common1->suspmode);
-
-#if defined(__LITTLE_ENDIAN)
-	writel(0x00000000, &align->ehcidatac);
-	writel(0x00000000, &align->ohcidatac);
-#endif
-}
-
-static void init_gether_mdio(void)
-{
-	struct gpio_regs *gpio = GPIO_BASE;
-
-	writew(readw(&gpio->pgcr) | 0x0004, &gpio->pgcr);
-	writeb(readb(&gpio->pgdr) | 0x02, &gpio->pgdr);	/* Use ET0-MDIO */
-}
-
-static void set_mac_to_sh_giga_eth_register(int channel, char *mac_string)
-{
-	struct ether_mac_regs *ether;
-	unsigned char mac[6];
-	unsigned long val;
-
-	string_to_enetaddr(mac_string, mac);
-
-	if (!channel)
-		ether = GETHER0_MAC_BASE;
-	else
-		ether = GETHER1_MAC_BASE;
-
-	val = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3];
-	writel(val, &ether->mahr);
-	val = (mac[4] << 8) | mac[5];
-	writel(val, &ether->malr);
-}
-
-#if defined(CONFIG_SH_32BIT)
-/*****************************************************************
- * This PMB must be set on this timing. The lowlevel_init is run on
- * Area 0(phys 0x00000000), so we have to map it.
- *
- * The new PMB table is following:
- * ent	virt		phys		v	sz	c	wt
- * 0	0xa0000000	0x40000000	1	128M	0	1
- * 1	0xa8000000	0x48000000	1	128M	0	1
- * 2	0xb0000000	0x50000000	1	128M	0	1
- * 3	0xb8000000	0x58000000	1	128M	0	1
- * 4	0x80000000	0x40000000	1	128M	1	1
- * 5	0x88000000	0x48000000	1	128M	1	1
- * 6	0x90000000	0x50000000	1	128M	1	1
- * 7	0x98000000	0x58000000	1	128M	1	1
- */
-static void set_pmb_on_board_init(void)
-{
-	struct mmu_regs *mmu = MMU_BASE;
-
-	/* clear ITLB */
-	writel(0x00000004, &mmu->mmucr);
-
-	/* delete PMB for SPIBOOT */
-	writel(0, PMB_ADDR_BASE(0));
-	writel(0, PMB_DATA_BASE(0));
-
-	/* add PMB for SDRAM(0x40000000 - 0x47ffffff) */
-	/*			ppn  ub v s1 s0  c  wt */
-	writel(mk_pmb_addr_val(0xa0), PMB_ADDR_BASE(0));
-	writel(mk_pmb_data_val(0x40, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(0));
-	writel(mk_pmb_addr_val(0xb0), PMB_ADDR_BASE(2));
-	writel(mk_pmb_data_val(0x50, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(2));
-	writel(mk_pmb_addr_val(0xb8), PMB_ADDR_BASE(3));
-	writel(mk_pmb_data_val(0x58, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(3));
-	writel(mk_pmb_addr_val(0x80), PMB_ADDR_BASE(4));
-	writel(mk_pmb_data_val(0x40, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(4));
-	writel(mk_pmb_addr_val(0x90), PMB_ADDR_BASE(6));
-	writel(mk_pmb_data_val(0x50, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(6));
-	writel(mk_pmb_addr_val(0x98), PMB_ADDR_BASE(7));
-	writel(mk_pmb_data_val(0x58, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(7));
-}
-#endif
-
-int board_init(void)
-{
-	struct gether_control_regs *gether = GETHER_CONTROL_BASE;
-
-	init_gpio();
-#if defined(CONFIG_SH_32BIT)
-	set_pmb_on_board_init();
-#endif
-
-	/* Sets TXnDLY to B'010 */
-	writel(0x00000202, &gether->gbecont);
-
-	init_usb_phy();
-	init_gether_mdio();
-
-	return 0;
-}
-
-int board_mmc_init(struct bd_info *bis)
-{
-	struct gpio_regs *gpio = GPIO_BASE;
-
-	writew(readw(&gpio->pgcr) | 0x0040, &gpio->pgcr);
-	writeb(readb(&gpio->pgdr) & ~0x08, &gpio->pgdr); /* Reset */
-	udelay(1);
-	writeb(readb(&gpio->pgdr) | 0x08, &gpio->pgdr);	/* Release reset */
-	udelay(200);
-
-	return mmcif_mmc_init();
-}
-
-static int get_sh_eth_mac_raw(unsigned char *buf, int size)
-{
-#ifdef CONFIG_DEPRECATED
-	struct spi_flash *spi;
-	int ret;
-
-	spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
-	if (spi == NULL) {
-		printf("%s: spi_flash probe failed.\n", __func__);
-		return 1;
-	}
-
-	ret = spi_flash_read(spi, SH7753EVB_ETHERNET_MAC_BASE, size, buf);
-	if (ret) {
-		printf("%s: spi_flash read failed.\n", __func__);
-		spi_flash_free(spi);
-		return 1;
-	}
-	spi_flash_free(spi);
-#endif
-
-	return 0;
-}
-
-static int get_sh_eth_mac(int channel, char *mac_string, unsigned char *buf)
-{
-	memcpy(mac_string, &buf[channel * (SH7753EVB_ETHERNET_MAC_SIZE + 1)],
-		SH7753EVB_ETHERNET_MAC_SIZE);
-	mac_string[SH7753EVB_ETHERNET_MAC_SIZE] = 0x00;	/* terminate */
-
-	return 0;
-}
-
-static void init_ethernet_mac(void)
-{
-	char mac_string[64];
-	char env_string[64];
-	int i;
-	unsigned char *buf;
-
-	buf = malloc(256);
-	if (!buf) {
-		printf("%s: malloc failed.\n", __func__);
-		return;
-	}
-	get_sh_eth_mac_raw(buf, 256);
-
-	/* Gigabit Ethernet */
-	for (i = 0; i < SH7753EVB_ETHERNET_NUM_CH; i++) {
-		get_sh_eth_mac(i, mac_string, buf);
-		if (i == 0)
-			env_set("ethaddr", mac_string);
-		else {
-			sprintf(env_string, "eth%daddr", i);
-			env_set(env_string, mac_string);
-		}
-		set_mac_to_sh_giga_eth_register(i, mac_string);
-	}
-
-	free(buf);
-}
-
-int board_late_init(void)
-{
-	init_ethernet_mac();
-
-	return 0;
-}
-
-#ifdef CONFIG_DEPRECATED
-int do_write_mac(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
-{
-	int i, ret;
-	char mac_string[256];
-	struct spi_flash *spi;
-	unsigned char *buf;
-
-	if (argc != 3) {
-		buf = malloc(256);
-		if (!buf) {
-			printf("%s: malloc failed.\n", __func__);
-			return 1;
-		}
-
-		get_sh_eth_mac_raw(buf, 256);
-
-		/* print current MAC address */
-		for (i = 0; i < SH7753EVB_ETHERNET_NUM_CH; i++) {
-			get_sh_eth_mac(i, mac_string, buf);
-			printf("GETHERC ch%d = %s\n", i, mac_string);
-		}
-		free(buf);
-		return 0;
-	}
-
-	/* new setting */
-	memset(mac_string, 0xff, sizeof(mac_string));
-	sprintf(mac_string, "%s\t%s",
-		argv[1], argv[2]);
-
-	/* write MAC data to SPI rom */
-	spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
-	if (!spi) {
-		printf("%s: spi_flash probe failed.\n", __func__);
-		return 1;
-	}
-
-	ret = spi_flash_erase(spi, SH7753EVB_ETHERNET_MAC_BASE_SPI,
-				SH7753EVB_SPI_SECTOR_SIZE);
-	if (ret) {
-		printf("%s: spi_flash erase failed.\n", __func__);
-		return 1;
-	}
-
-	ret = spi_flash_write(spi, SH7753EVB_ETHERNET_MAC_BASE_SPI,
-				sizeof(mac_string), mac_string);
-	if (ret) {
-		printf("%s: spi_flash write failed.\n", __func__);
-		spi_flash_free(spi);
-		return 1;
-	}
-	spi_flash_free(spi);
-
-	puts("The writing of the MAC address to SPI ROM was completed.\n");
-
-	return 0;
-}
-
-U_BOOT_CMD(
-	write_mac,	3,	1,	do_write_mac,
-	"write MAC address for GETHERC",
-	"[GETHERC ch0] [GETHERC ch1]\n"
-);
-#endif