diff options
| author | Ilko Iliev <iliev@ronetix.at> | 2021-04-23 16:06:02 +0300 |
|---|---|---|
| committer | Eugen Hristev <eugen.hristev@microchip.com> | 2021-05-13 09:55:04 +0300 |
| commit | f822b62c0238e108446a42c6ad2683e790162e84 (patch) | |
| tree | 8e02937403089dec2d17495ff017237cbbdf2fe8 /board/ronetix | |
| parent | 217c9faa060e09cf3da3741dc07617c0697b559e (diff) | |
| download | u-boot-f822b62c0238e108446a42c6ad2683e790162e84.tar.xz | |
board: pm9261: remove network support
The network support is removed because there is
no DM for Davicom DM9000.
Signed-off-by: Ilko Iliev <iliev@ronetix.at>
Diffstat (limited to 'board/ronetix')
| -rw-r--r-- | board/ronetix/pm9261/pm9261.c | 54 |
1 files changed, 0 insertions, 54 deletions
diff --git a/board/ronetix/pm9261/pm9261.c b/board/ronetix/pm9261/pm9261.c index 5be2c5e192..fe52c7c176 100644 --- a/board/ronetix/pm9261/pm9261.c +++ b/board/ronetix/pm9261/pm9261.c @@ -20,10 +20,6 @@ #include <asm/arch/at91_matrix.h> #include <asm/arch/clk.h> #include <asm/arch/gpio.h> -#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_DRIVER_DM9000) -#include <net.h> -#endif -#include <netdev.h> #include <asm/mach-types.h> DECLARE_GLOBAL_DATA_PTR; @@ -80,36 +76,6 @@ static void pm9261_nand_hw_init(void) } #endif - -#ifdef CONFIG_DRIVER_DM9000 -static void pm9261_dm9000_hw_init(void) -{ - struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; - - /* Configure SMC CS2 for DM9000 */ - writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) | - AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0), - &smc->cs[2].setup); - - writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(8) | - AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(8), - &smc->cs[2].pulse); - - writel(AT91_SMC_CYCLE_NWE(16) | AT91_SMC_CYCLE_NRD(16), - &smc->cs[2].cycle); - - writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | - AT91_SMC_MODE_EXNW_DISABLE | - AT91_SMC_MODE_BAT | AT91_SMC_MODE_DBW_16 | - AT91_SMC_MODE_TDF_CYCLE(1), - &smc->cs[2].mode); - - /* Configure Interrupt pin as input, no pull-up */ - at91_periph_clk_enable(ATMEL_ID_PIOA); - at91_set_pio_input(AT91_PIO_PORTA, 24, 0); -} -#endif - int board_early_init_f(void) { return 0; @@ -132,13 +98,6 @@ int board_init(void) return 0; } -#ifdef CONFIG_DRIVER_DM9000 -int board_eth_init(struct bd_info *bis) -{ - return dm9000_initialize(bis); -} -#endif - int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ @@ -155,19 +114,6 @@ int dram_init_banksize(void) return 0; } -#ifdef CONFIG_RESET_PHY_R -void reset_phy(void) -{ -#ifdef CONFIG_DRIVER_DM9000 - /* - * Initialize ethernet HW addr prior to starting Linux, - * needed for nfsroot - */ - eth_init(); -#endif -} -#endif - #ifdef CONFIG_DISPLAY_BOARDINFO int checkboard (void) { |