diff options
author | Heiko Stuebner <heiko.stuebner@theobroma-systems.com> | 2020-06-05 13:06:42 +0300 |
---|---|---|
committer | Kever Yang <kever.yang@rock-chips.com> | 2020-06-07 13:57:16 +0300 |
commit | c48cbb9133957989612620800c1e16b0c8bf1613 (patch) | |
tree | e5eeb4fc23c57a5358e5de147b0f15b78d2bf88c /board/theobroma-systems | |
parent | 9bbc13e790c8bfaa4ef38b8bf9b3fbaa56f1df85 (diff) | |
download | u-boot-c48cbb9133957989612620800c1e16b0c8bf1613.tar.xz |
rockchip: puma: drop special handling of usb host regulator
With the current usb stack in u-boot, all host ports on puma work
flawlessly without any additional special handling, so drop that
usb hub hacking from the puma board.
Tested with mass-storage and usb-ethernet on both usb3 and usb2 ports.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Diffstat (limited to 'board/theobroma-systems')
-rw-r--r-- | board/theobroma-systems/puma_rk3399/puma-rk3399.c | 67 |
1 files changed, 0 insertions, 67 deletions
diff --git a/board/theobroma-systems/puma_rk3399/puma-rk3399.c b/board/theobroma-systems/puma_rk3399/puma-rk3399.c index 65bb2ad6f2..deeba3084a 100644 --- a/board/theobroma-systems/puma_rk3399/puma-rk3399.c +++ b/board/theobroma-systems/puma_rk3399/puma-rk3399.c @@ -152,70 +152,3 @@ void get_board_serial(struct tag_serialnr *serialnr) serialnr->low = (u32)(serial & 0xffffffff); } #endif - -/** - * Switch power at an external regulator (for our root hub). - * - * @param ctrl pointer to the xHCI controller - * @param port port number as in the control message (one-based) - * @param enable boolean indicating whether to enable or disable power - * @return returns 0 on success, an error-code on failure - */ -static int board_usb_port_power_set(struct udevice *dev, int port, - bool enable) -{ -#if CONFIG_IS_ENABLED(OF_CONTROL) && CONFIG_IS_ENABLED(DM_REGULATOR) - /* We start counting ports at 0, while USB counts from 1. */ - int index = port - 1; - const char *regname = NULL; - struct udevice *regulator; - const char *prop = "tsd,usb-port-power"; - int ret; - - debug("%s: ctrl '%s' port %d enable %s\n", __func__, - dev_read_name(dev), port, enable ? "true" : "false"); - - ret = dev_read_string_index(dev, prop, index, ®name); - if (ret < 0) { - debug("%s: ctrl '%s' port %d: no entry in '%s'\n", - __func__, dev_read_name(dev), port, prop); - return ret; - } - - ret = regulator_get_by_platname(regname, ®ulator); - if (ret) { - debug("%s: ctrl '%s' port %d: could not get regulator '%s'\n", - __func__, dev_read_name(dev), port, regname); - return ret; - } - - regulator_set_enable(regulator, enable); - return 0; -#else - return -ENOTSUPP; -#endif -} - -void usb_hub_reset_devices(struct usb_hub_device *hub, int port) -{ - struct udevice *dev = hub->pusb_dev->dev; - struct udevice *ctrl; - - /* We are only interested in our root-hubs */ - if (usb_hub_is_root_hub(dev) == false) - return; - - ctrl = usb_get_bus(dev); - if (!ctrl) { - debug("%s: could not retrieve ctrl for hub\n", __func__); - return; - } - - /* - * To work around an incompatibility between the single-threaded - * USB stack in U-Boot and (a strange low-power mode of) the USB - * hub we have on-module, we need to delay powering on the hub - * until the first time the port is probed. - */ - board_usb_port_power_set(ctrl, port, true); -} |