env: Rename setenv() to env_set()

We are now using an env_ prefix for environment functions. Rename setenv()
for consistency. Also add function comments in common.h.

Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>

8 files changed, 35 insertions, 35 deletions

diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index ac0592b725..5751b814ca 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -731,7 +731,7 @@ int board_late_init(void)
 	 * on HS devices.
 	 */
 	if (get_device_type() == HS_DEVICE)
-		setenv("boot_fit", "1");
+		env_set("boot_fit", "1");
 #endif
 
 #if !defined(CONFIG_SPL_BUILD)
diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c
index 933596d59c..55098bf816 100644
--- a/board/ti/am43xx/board.c
+++ b/board/ti/am43xx/board.c
@@ -626,7 +626,7 @@ int board_late_init(void)
 	 * on HS devices.
 	 */
 	if (get_device_type() == HS_DEVICE)
-		setenv("boot_fit", "1");
+		env_set("boot_fit", "1");
 #endif
 	return 0;
 }
diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
index 126c9ef694..bd94a90f8f 100644
--- a/board/ti/am57xx/board.c
+++ b/board/ti/am57xx/board.c
@@ -592,7 +592,7 @@ void am57x_idk_lcd_detect(void)
 		/* we will let default be "no lcd" */
 	}
 out:
-	setenv("idk_lcd", idk_lcd);
+	env_set("idk_lcd", idk_lcd);
 	return;
 }
 
@@ -612,7 +612,7 @@ int board_late_init(void)
 	 * on HS devices.
 	 */
 	if (get_device_type() == HS_DEVICE)
-		setenv("boot_fit", "1");
+		env_set("boot_fit", "1");
 
 	/*
 	 * Set the GPIO7 Pad to POWERHOLD. This has higher priority
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index 887b577b6a..2f62fbec69 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -341,16 +341,16 @@ int misc_init_r(void)
 	switch (get_board_revision()) {
 	case REVISION_AXBX:
 		printf("Beagle Rev Ax/Bx\n");
-		setenv("beaglerev", "AxBx");
+		env_set("beaglerev", "AxBx");
 		break;
 	case REVISION_CX:
 		printf("Beagle Rev C1/C2/C3\n");
-		setenv("beaglerev", "Cx");
+		env_set("beaglerev", "Cx");
 		MUX_BEAGLE_C();
 		break;
 	case REVISION_C4:
 		printf("Beagle Rev C4\n");
-		setenv("beaglerev", "C4");
+		env_set("beaglerev", "C4");
 		MUX_BEAGLE_C();
 		/* Set VAUX2 to 1.8V for EHCI PHY */
 		twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
@@ -360,7 +360,7 @@ int misc_init_r(void)
 		break;
 	case REVISION_XM_AB:
 		printf("Beagle xM Rev A/B\n");
-		setenv("beaglerev", "xMAB");
+		env_set("beaglerev", "xMAB");
 		MUX_BEAGLE_XM();
 		/* Set VAUX2 to 1.8V for EHCI PHY */
 		twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
@@ -371,7 +371,7 @@ int misc_init_r(void)
 		break;
 	case REVISION_XM_C:
 		printf("Beagle xM Rev C\n");
-		setenv("beaglerev", "xMC");
+		env_set("beaglerev", "xMC");
 		MUX_BEAGLE_XM();
 		/* Set VAUX2 to 1.8V for EHCI PHY */
 		twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
@@ -397,14 +397,14 @@ int misc_init_r(void)
 			expansion_config.revision,
 			expansion_config.fab_revision);
 		MUX_TINCANTOOLS_ZIPPY();
-		setenv("buddy", "zippy");
+		env_set("buddy", "zippy");
 		break;
 	case TINCANTOOLS_ZIPPY2:
 		printf("Recognized Tincantools Zippy2 board (rev %d %s)\n",
 			expansion_config.revision,
 			expansion_config.fab_revision);
 		MUX_TINCANTOOLS_ZIPPY();
-		setenv("buddy", "zippy2");
+		env_set("buddy", "zippy2");
 		break;
 	case TINCANTOOLS_TRAINER:
 		printf("Recognized Tincantools Trainer board (rev %d %s)\n",
@@ -412,37 +412,37 @@ int misc_init_r(void)
 			expansion_config.fab_revision);
 		MUX_TINCANTOOLS_ZIPPY();
 		MUX_TINCANTOOLS_TRAINER();
-		setenv("buddy", "trainer");
+		env_set("buddy", "trainer");
 		break;
 	case TINCANTOOLS_SHOWDOG:
 		printf("Recognized Tincantools Showdow board (rev %d %s)\n",
 			expansion_config.revision,
 			expansion_config.fab_revision);
 		/* Place holder for DSS2 definition for showdog lcd */
-		setenv("defaultdisplay", "showdoglcd");
-		setenv("buddy", "showdog");
+		env_set("defaultdisplay", "showdoglcd");
+		env_set("buddy", "showdog");
 		break;
 	case KBADC_BEAGLEFPGA:
 		printf("Recognized KBADC Beagle FPGA board\n");
 		MUX_KBADC_BEAGLEFPGA();
-		setenv("buddy", "beaglefpga");
+		env_set("buddy", "beaglefpga");
 		break;
 	case LW_BEAGLETOUCH:
 		printf("Recognized Liquidware BeagleTouch board\n");
-		setenv("buddy", "beagletouch");
+		env_set("buddy", "beagletouch");
 		break;
 	case BRAINMUX_LCDOG:
 		printf("Recognized Brainmux LCDog board\n");
-		setenv("buddy", "lcdog");
+		env_set("buddy", "lcdog");
 		break;
 	case BRAINMUX_LCDOGTOUCH:
 		printf("Recognized Brainmux LCDog Touch board\n");
-		setenv("buddy", "lcdogtouch");
+		env_set("buddy", "lcdogtouch");
 		break;
 	case BBTOYS_WIFI:
 		printf("Recognized BeagleBoardToys WiFi board\n");
 		MUX_BBTOYS_WIFI()
-		setenv("buddy", "bbtoys-wifi");
+		env_set("buddy", "bbtoys-wifi");
 		break;
 	case BBTOYS_VGA:
 		printf("Recognized BeagleBoardToys VGA board\n");
@@ -459,20 +459,20 @@ int misc_init_r(void)
 	case LSR_COM6L_ADPT:
 		printf("Recognized LSR COM6L Adapter Board\n");
 		MUX_BBTOYS_WIFI()
-		setenv("buddy", "lsr-com6l-adpt");
+		env_set("buddy", "lsr-com6l-adpt");
 		break;
 	case BEAGLE_NO_EEPROM:
 		printf("No EEPROM on expansion board\n");
-		setenv("buddy", "none");
+		env_set("buddy", "none");
 		break;
 	default:
 		printf("Unrecognized expansion board: %x\n",
 			expansion_config.device_vendor);
-		setenv("buddy", "unknown");
+		env_set("buddy", "unknown");
 	}
 
 	if (expansion_config.content == 1)
-		setenv(expansion_config.env_var, expansion_config.env_setting);
+		env_set(expansion_config.env_var, expansion_config.env_setting);
 
 	twl4030_power_init();
 	switch (get_board_revision()) {
diff --git a/board/ti/common/board_detect.c b/board/ti/common/board_detect.c
index 1da5ace923..c4ef28282f 100644
--- a/board/ti/common/board_detect.c
+++ b/board/ti/common/board_detect.c
@@ -379,21 +379,21 @@ void __maybe_unused set_board_info_env(char *name)
 	struct ti_common_eeprom *ep = TI_EEPROM_DATA;
 
 	if (name)
-		setenv("board_name", name);
+		env_set("board_name", name);
 	else if (ep->name)
-		setenv("board_name", ep->name);
+		env_set("board_name", ep->name);
 	else
-		setenv("board_name", unknown);
+		env_set("board_name", unknown);
 
 	if (ep->version)
-		setenv("board_rev", ep->version);
+		env_set("board_rev", ep->version);
 	else
-		setenv("board_rev", unknown);
+		env_set("board_rev", unknown);
 
 	if (ep->serial)
-		setenv("board_serial", ep->serial);
+		env_set("board_serial", ep->serial);
 	else
-		setenv("board_serial", unknown);
+		env_set("board_serial", unknown);
 }
 
 static u64 mac_to_u64(u8 mac[6])
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index 23be2c70e4..5c43561bb7 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -558,7 +558,7 @@ int board_late_init(void)
 	 * on HS devices.
 	 */
 	if (get_device_type() == HS_DEVICE)
-		setenv("boot_fit", "1");
+		env_set("boot_fit", "1");
 
 	omap_die_id_serial();
 	omap_set_fastboot_vars();
diff --git a/board/ti/ks2_evm/board_k2g.c b/board/ti/ks2_evm/board_k2g.c
index 21605762ef..15f0f54af6 100644
--- a/board/ti/ks2_evm/board_k2g.c
+++ b/board/ti/ks2_evm/board_k2g.c
@@ -310,9 +310,9 @@ int board_late_init(void)
 
 #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 	if (board_is_k2g_gp())
-		setenv("board_name", "66AK2GGP\0");
+		env_set("board_name", "66AK2GGP\0");
 	else if (board_is_k2g_ice())
-		setenv("board_name", "66AK2GIC\0");
+		env_set("board_name", "66AK2GIC\0");
 #endif
 	return 0;
 }
diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
index 6ffb53c4c6..c59e58a82a 100644
--- a/board/ti/panda/panda.c
+++ b/board/ti/panda/panda.c
@@ -103,7 +103,7 @@ int get_board_revision(void)
 		board_id4 = gpio_get_value(PANDA_ES_BOARD_ID_4_GPIO);
 
 #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-		setenv("board_name", "panda-es");
+		env_set("board_name", "panda-es");
 #endif
 		board_id = ((board_id4 << 4) | (board_id3 << 3) |
 			(board_id2 << 2) | (board_id1 << 1) | (board_id0));
@@ -117,7 +117,7 @@ int get_board_revision(void)
 
 #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 		if ((board_id >= 0x3) && (processor_rev == OMAP4430_ES2_3))
-			setenv("board_name", "panda-a4");
+			env_set("board_name", "panda-a4");
 #endif
 	}