diff options
author | Marek Vasut <marex@denx.de> | 2019-11-26 11:39:10 +0300 |
---|---|---|
committer | Stefano Babic <sbabic@denx.de> | 2019-12-06 15:57:42 +0300 |
commit | 26822fd23cb1cf5eebe88547d879c01756228748 (patch) | |
tree | 9548ad442cf99548a59e636aeaa06835dfa39313 /board | |
parent | 5b97abab5540c6c611573523739a3226b8aaf31f (diff) | |
download | u-boot-26822fd23cb1cf5eebe88547d879c01756228748.tar.xz |
ARM: imx: vining2000: Convert to ethernet DM
Convert the board to ethernet DM support. Adjust board file accordingly,
as the board_eth_init() contains custom clock configuration required for
this board to work. Furthermore, enable FEC1 clock to make FEC1 work as
well.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Silvio Fricke <silvio.fricke@softing.com>
Cc: Stefano Babic <sbabic@denx.de>
Diffstat (limited to 'board')
-rw-r--r-- | board/softing/vining_2000/vining_2000.c | 38 |
1 files changed, 5 insertions, 33 deletions
diff --git a/board/softing/vining_2000/vining_2000.c b/board/softing/vining_2000/vining_2000.c index c6aee4ee2b..b6f1415bb5 100644 --- a/board/softing/vining_2000/vining_2000.c +++ b/board/softing/vining_2000/vining_2000.c @@ -72,42 +72,23 @@ int dram_init(void) return 0; } -static iomux_v3_cfg_t const fec1_pads[] = { - MX6_PAD_ENET1_MDC__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET1_MDIO__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII1_RD0__ENET1_RX_DATA_0 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), - MX6_PAD_RGMII1_RD1__ENET1_RX_DATA_1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), - MX6_PAD_RGMII1_TD0__ENET1_TX_DATA_0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII1_TD1__ENET1_TX_DATA_1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII1_RX_CTL__ENET1_RX_EN | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), - MX6_PAD_RGMII1_TX_CTL__ENET1_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 | MUX_PAD_CTRL(ENET_CLK_PAD_CTRL) | - MUX_MODE_SION, - /* LAN8720 PHY Reset */ - MX6_PAD_RGMII1_TD3__GPIO5_IO_9 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - static iomux_v3_cfg_t const pwm_led_pads[] = { MX6_PAD_RGMII2_RD2__PWM2_OUT | MUX_PAD_CTRL(NO_PAD_CTRL), /* green */ MX6_PAD_RGMII2_TD2__PWM6_OUT | MUX_PAD_CTRL(NO_PAD_CTRL), /* red */ MX6_PAD_RGMII2_RD3__PWM1_OUT | MUX_PAD_CTRL(NO_PAD_CTRL), /* blue */ }; -#define PHY_RESET IMX_GPIO_NR(5, 9) - -int board_eth_init(bd_t *bis) +static int board_net_init(void) { struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; - int ret; unsigned char eth1addr[6]; + int ret; - /* just to get secound mac address */ + /* just to get second mac address */ imx_get_mac_from_fuse(1, eth1addr); if (!env_get("eth1addr") && is_valid_ethaddr(eth1addr)) eth_env_set_enetaddr("eth1addr", eth1addr); - imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads)); - /* * Generate phy reference clock via pin IOMUX ENET_REF_CLK1/2 by erasing * ENET1/2_TX_CLK_DIR gpr1[14:13], so that reference clock is driven by @@ -123,15 +104,7 @@ int board_eth_init(bd_t *bis) if (ret) goto eth_fail; - /* reset phy */ - gpio_request(PHY_RESET, "PHY-reset"); - gpio_direction_output(PHY_RESET, 0); - mdelay(16); - gpio_set_value(PHY_RESET, 1); - mdelay(1); - - ret = fecmxc_initialize_multi(bis, 0, CONFIG_FEC_MXC_PHYADDR, - IMX_FEC_BASE); + ret = enable_fec_anatop_clock(1, ENET_50MHZ); if (ret) goto eth_fail; @@ -139,7 +112,6 @@ int board_eth_init(bd_t *bis) eth_fail: printf("FEC MXC: %s:failed (%i)\n", __func__, ret); - gpio_set_value(PHY_RESET, 0); return ret; } @@ -424,7 +396,7 @@ int board_init(void) setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); #endif - return 0; + return board_net_init(); } int checkboard(void) |