diff options
author | Suman Anna <s-anna@ti.com> | 2017-09-08 22:08:24 +0300 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2017-09-15 04:32:55 +0300 |
commit | 101d2171e10951d115fd9229c5edc883f1833e96 (patch) | |
tree | 082165619e79fa98efaf9bc2c733d0c9403dfb9b /board | |
parent | 5541543f686b43210fb92181003ff7175d4ab036 (diff) | |
download | u-boot-101d2171e10951d115fd9229c5edc883f1833e96.tar.xz |
arm: am57xx: cl-som-am57x: Use new pinctrl macros
Commit 6ae4c3efbd62 ("ARM: DRA7: Add pinctrl register definitions")
has added new macros for pinmux configuration in line with the
kernel definitions. Fixup the current pinctrl data for the CompuLab
CL-SOM-AM57x board to use these new macros to facilitate the removal
of the old macros.
NOTE:
The PEN and PDIS macro values used previously were actually defined
inversely, a value of 1 in bit position 16 actually means that the
internal pullup/pulldown is disabled and not enabled as inferred by
PEN. So, previous pinmux config data such as (PDIS | PTU) is confusing
as it actually was meant for enabling internal pullup. The data is
fixed up only to be equivalent to the previous data.
Signed-off-by: Suman Anna <s-anna@ti.com>
Diffstat (limited to 'board')
-rw-r--r-- | board/compulab/cl-som-am57x/mux.c | 105 |
1 files changed, 53 insertions, 52 deletions
diff --git a/board/compulab/cl-som-am57x/mux.c b/board/compulab/cl-som-am57x/mux.c index 0db0609727..21449ca029 100644 --- a/board/compulab/cl-som-am57x/mux.c +++ b/board/compulab/cl-som-am57x/mux.c @@ -12,97 +12,98 @@ /* Serial console */ static const struct pad_conf_entry cl_som_am57x_padconf_console[] = { - {UART3_RXD, (FSC | IEN | PDIS | PTU | M0)}, /* UART3_RXD */ - {UART3_TXD, (FSC | IEN | PDIS | PTU | M0)}, /* UART3_TXD */ + {UART3_RXD, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* UART3_RXD */ + {UART3_TXD, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* UART3_TXD */ }; /* PMIC I2C */ static const struct pad_conf_entry cl_som_am57x_padconf_pmic[] = { - {MCASP1_ACLKR, (IEN | PEN | M10)}, /* MCASP1_ACLKR.I2C4_SDA */ - {MCASP1_FSR, (IEN | PEN | M10)}, /* MCASP1_FSR.I2C4_SCL */ + {MCASP1_ACLKR, (M10 | PIN_INPUT)}, /* MCASP1_ACLKR.I2C4_SDA */ + {MCASP1_FSR, (M10 | PIN_INPUT)}, /* MCASP1_FSR.I2C4_SCL */ }; /* Green GPIO led */ static const struct pad_conf_entry cl_som_am57x_padconf_green_led[] = { - {GPMC_A15, (IDIS | PDIS | PTD | M14)}, /* GPMC_A15.GPIO2_5 */ + {GPMC_A15, (M14 | PIN_OUTPUT_PULLDOWN)}, /* GPMC_A15.GPIO2_5 */ }; /* MMC/SD Card */ static const struct pad_conf_entry cl_som_am57x_padconf_sd_card[] = { - {MMC1_CLK, (IEN | PDIS | PTU | M0) }, /* MMC1_CLK */ - {MMC1_CMD, (IEN | PDIS | PTU | M0) }, /* MMC1_CMD */ - {MMC1_DAT0, (IEN | PDIS | PTU | M0) }, /* MMC1_DAT0 */ - {MMC1_DAT1, (IEN | PDIS | PTU | M0) }, /* MMC1_DAT1 */ - {MMC1_DAT2, (IEN | PDIS | PTU | M0) }, /* MMC1_DAT2 */ - {MMC1_DAT3, (IEN | PDIS | PTU | M0) }, /* MMC1_DAT3 */ - {MMC1_SDCD, (IEN | PEN | M14)}, /* MMC1_SDCD */ - {MMC1_SDWP, (IEN | PEN | M14)}, /* MMC1_SDWP */ + {MMC1_CLK, (M0 | PIN_INPUT_PULLUP)}, /* MMC1_CLK */ + {MMC1_CMD, (M0 | PIN_INPUT_PULLUP)}, /* MMC1_CMD */ + {MMC1_DAT0, (M0 | PIN_INPUT_PULLUP)}, /* MMC1_DAT0 */ + {MMC1_DAT1, (M0 | PIN_INPUT_PULLUP)}, /* MMC1_DAT1 */ + {MMC1_DAT2, (M0 | PIN_INPUT_PULLUP)}, /* MMC1_DAT2 */ + {MMC1_DAT3, (M0 | PIN_INPUT_PULLUP)}, /* MMC1_DAT3 */ + {MMC1_SDCD, (M14 | PIN_INPUT) }, /* MMC1_SDCD */ + {MMC1_SDWP, (M14 | PIN_INPUT) }, /* MMC1_SDWP */ }; /* WiFi - must be in the safe mode on boot */ static const struct pad_conf_entry cl_som_am57x_padconf_wifi[] = { - {UART1_CTSN, (IEN | M15)}, /* UART1_CTSN */ - {UART1_RTSN, (IEN | M15)}, /* UART1_RTSN */ - {UART2_RXD, (IEN | M15)}, /* UART2_RXD */ - {UART2_TXD, (IEN | M15)}, /* UART2_TXD */ - {UART2_CTSN, (IEN | M15)}, /* UART2_CTSN */ - {UART2_RTSN, (IEN | M15)}, /* UART2_RTSN */ + {UART1_CTSN, (M15 | PIN_INPUT_PULLDOWN)}, /* UART1_CTSN */ + {UART1_RTSN, (M15 | PIN_INPUT_PULLDOWN)}, /* UART1_RTSN */ + {UART2_RXD, (M15 | PIN_INPUT_PULLDOWN)}, /* UART2_RXD */ + {UART2_TXD, (M15 | PIN_INPUT_PULLDOWN)}, /* UART2_TXD */ + {UART2_CTSN, (M15 | PIN_INPUT_PULLDOWN)}, /* UART2_CTSN */ + {UART2_RTSN, (M15 | PIN_INPUT_PULLDOWN)}, /* UART2_RTSN */ }; /* QSPI */ static const struct pad_conf_entry cl_som_am57x_padconf_qspi[] = { - {GPMC_A13, (IEN | PEN | M1)}, /* GPMC_A13.QSPI1_RTCLK */ - {GPMC_A18, (IEN | PEN | M1)}, /* GPMC_A18.QSPI1_SCLK */ - {GPMC_A16, (IEN | PEN | M1)}, /* GPMC_A16.QSPI1_D0 */ - {GPMC_A17, (IEN | PEN | M1)}, /* GPMC_A17.QSPI1_D1 */ - {GPMC_CS2, (IEN | PDIS | PTU | M1)}, /* GPMC_CS2.QSPI1_CS0 */ + {GPMC_A13, (M1 | PIN_INPUT) }, /* GPMC_A13.QSPI1_RTCLK */ + {GPMC_A18, (M1 | PIN_INPUT) }, /* GPMC_A18.QSPI1_SCLK */ + {GPMC_A16, (M1 | PIN_INPUT) }, /* GPMC_A16.QSPI1_D0 */ + {GPMC_A17, (M1 | PIN_INPUT) }, /* GPMC_A17.QSPI1_D1 */ + {GPMC_CS2, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_CS2.QSPI1_CS0 */ }; /* GPIO Expander I2C */ static const struct pad_conf_entry cl_som_am57x_padconf_i2c_gpio[] = { - {MCASP1_AXR0, (IEN | PEN | M10)}, /* MCASP1_AXR0.I2C5_SDA */ - {MCASP1_AXR1, (IEN | PEN | M10)}, /* MCASP1_AXR1.I2C5_SCL */ + {MCASP1_AXR0, (M10 | PIN_INPUT)}, /* MCASP1_AXR0.I2C5_SDA */ + {MCASP1_AXR1, (M10 | PIN_INPUT)}, /* MCASP1_AXR1.I2C5_SCL */ }; /* eMMC internal storage */ static const struct pad_conf_entry cl_som_am57x_padconf_emmc[] = { - {GPMC_A19, (IEN | PDIS | PTU | M1)}, /* GPMC_A19.MMC2_DAT4 */ - {GPMC_A20, (IEN | PDIS | PTU | M1)}, /* GPMC_A20.MMC2_DAT5 */ - {GPMC_A21, (IEN | PDIS | PTU | M1)}, /* GPMC_A21.MMC2_DAT6 */ - {GPMC_A22, (IEN | PDIS | PTU | M1)}, /* GPMC_A22.MMC2_DAT7 */ - {GPMC_A23, (IEN | PDIS | PTU | M1)}, /* GPMC_A23.MMC2_CLK */ - {GPMC_A24, (IEN | PDIS | PTU | M1)}, /* GPMC_A24.MMC2_DAT0 */ - {GPMC_A25, (IEN | PDIS | PTU | M1)}, /* GPMC_A25.MMC2_DAT1 */ - {GPMC_A26, (IEN | PDIS | PTU | M1)}, /* GPMC_A26.MMC2_DAT2 */ - {GPMC_A27, (IEN | PDIS | PTU | M1)}, /* GPMC_A27.MMC2_DAT3 */ - {GPMC_CS1, (IEN | PDIS | PTU | M1)}, /* GPMC_CS1.MMC2_CMD */ + {GPMC_A19, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A19.MMC2_DAT4 */ + {GPMC_A20, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A20.MMC2_DAT5 */ + {GPMC_A21, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A21.MMC2_DAT6 */ + {GPMC_A22, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A22.MMC2_DAT7 */ + {GPMC_A23, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A23.MMC2_CLK */ + {GPMC_A24, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A24.MMC2_DAT0 */ + {GPMC_A25, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A25.MMC2_DAT1 */ + {GPMC_A26, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A26.MMC2_DAT2 */ + {GPMC_A27, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A27.MMC2_DAT3 */ + {GPMC_CS1, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_CS1.MMC2_CMD */ }; /* usb1_drvvbus */ static const struct pad_conf_entry cl_som_am57x_padconf_usb[] = { - {USB1_DRVVBUS, (M0 | FSC) }, /* USB1_DRVVBUS.USB1_DRVVBUS */ + /* USB1_DRVVBUS.USB1_DRVVBUS */ + {USB1_DRVVBUS, (M0 | PIN_OUTPUT_PULLDOWN | SLEWCONTROL) }, }; /* Ethernet */ static const struct pad_conf_entry cl_som_am57x_padconf_ethernet[] = { /* MDIO bus */ - {VIN2A_D10, (PDIS | PTU | M3) }, /* VIN2A_D10.MDIO_MCLK */ - {VIN2A_D11, (IEN | PDIS | PTU | M3) }, /* VIN2A_D11.MDIO_D */ + {VIN2A_D10, (M3 | PIN_OUTPUT_PULLUP) }, /* VIN2A_D10.MDIO_MCLK */ + {VIN2A_D11, (M3 | PIN_INPUT_PULLUP) }, /* VIN2A_D11.MDIO_D */ /* EMAC Slave 1 at addr 0x1 - Default interface */ - {VIN2A_D12, (IDIS | PEN | M3) }, /* VIN2A_D12.RGMII1_TXC */ - {VIN2A_D13, (IDIS | PEN | M3) }, /* VIN2A_D13.RGMII1_TXCTL */ - {VIN2A_D14, (IDIS | PEN | M3) }, /* VIN2A_D14.RGMII1_TXD3 */ - {VIN2A_D15, (IDIS | PEN | M3) }, /* VIN2A_D15.RGMII1_TXD2 */ - {VIN2A_D16, (IDIS | PEN | M3) }, /* VIN2A_D16.RGMII1_TXD1 */ - {VIN2A_D17, (IDIS | PEN | M3) }, /* VIN2A_D17.RGMII1_TXD0 */ - {VIN2A_D18, (IEN | PDIS | PTD | M3) }, /* VIN2A_D18.RGMII1_RXC */ - {VIN2A_D19, (IEN | PDIS | PTD | M3) }, /* VIN2A_D19.RGMII1_RXCTL */ - {VIN2A_D20, (IEN | PDIS | PTD | M3) }, /* VIN2A_D20.RGMII1_RXD3 */ - {VIN2A_D21, (IEN | PDIS | PTD | M3) }, /* VIN2A_D21.RGMII1_RXD2 */ - {VIN2A_D22, (IEN | PDIS | PTD | M3) }, /* VIN2A_D22.RGMII1_RXD1 */ - {VIN2A_D23, (IEN | PDIS | PTD | M3) }, /* VIN2A_D23.RGMII1_RXD0 */ + {VIN2A_D12, (M3 | PIN_OUTPUT) }, /* VIN2A_D12.RGMII1_TXC */ + {VIN2A_D13, (M3 | PIN_OUTPUT) }, /* VIN2A_D13.RGMII1_TXCTL */ + {VIN2A_D14, (M3 | PIN_OUTPUT) }, /* VIN2A_D14.RGMII1_TXD3 */ + {VIN2A_D15, (M3 | PIN_OUTPUT) }, /* VIN2A_D15.RGMII1_TXD2 */ + {VIN2A_D16, (M3 | PIN_OUTPUT) }, /* VIN2A_D16.RGMII1_TXD1 */ + {VIN2A_D17, (M3 | PIN_OUTPUT) }, /* VIN2A_D17.RGMII1_TXD0 */ + {VIN2A_D18, (M3 | PIN_INPUT_PULLDOWN) }, /* VIN2A_D18.RGMII1_RXC */ + {VIN2A_D19, (M3 | PIN_INPUT_PULLDOWN) }, /* VIN2A_D19.RGMII1_RXCTL */ + {VIN2A_D20, (M3 | PIN_INPUT_PULLDOWN) }, /* VIN2A_D20.RGMII1_RXD3 */ + {VIN2A_D21, (M3 | PIN_INPUT_PULLDOWN) }, /* VIN2A_D21.RGMII1_RXD2 */ + {VIN2A_D22, (M3 | PIN_INPUT_PULLDOWN) }, /* VIN2A_D22.RGMII1_RXD1 */ + {VIN2A_D23, (M3 | PIN_INPUT_PULLDOWN) }, /* VIN2A_D23.RGMII1_RXD0 */ /* Eth PHY1 reset GPIOs*/ - {VIN2A_CLK0, (IDIS | PDIS | PTD | M14)}, /* VIN2A_CLK0.GPIO3_28 */ + {VIN2A_CLK0, (M14 | PIN_OUTPUT_PULLDOWN)}, /* VIN2A_CLK0.GPIO3_28 */ }; #define SET_MUX(mux_array) do_set_mux32((*ctrl)->control_padconf_core_base, \ |