diff options
author | Tom Rini <trini@konsulko.com> | 2021-02-10 05:42:50 +0300 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2021-04-10 14:58:22 +0300 |
commit | 34af2da9ad6ba940e0a4ad0cffec26488042a34c (patch) | |
tree | 27efe68b31a7e6e71e5289c1c2e1f6f01e277b8a /board | |
parent | c861d21cba44fe068e9a47dfcf57f7e84c54d73e (diff) | |
download | u-boot-34af2da9ad6ba940e0a4ad0cffec26488042a34c.tar.xz |
ppc: Remove MPC8349ITX board
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI. The
deadline for this conversion was the v2019.07 release. The use of CONFIG_AHCI
requires CONFIG_DM. The deadline for this conversion was v2020.01. Remove
this board.
Signed-off-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'board')
-rw-r--r-- | board/freescale/mpc8349itx/Kconfig | 12 | ||||
-rw-r--r-- | board/freescale/mpc8349itx/MAINTAINERS | 8 | ||||
-rw-r--r-- | board/freescale/mpc8349itx/Makefile | 6 | ||||
-rw-r--r-- | board/freescale/mpc8349itx/README | 186 | ||||
-rw-r--r-- | board/freescale/mpc8349itx/mpc8349itx.c | 402 | ||||
-rw-r--r-- | board/freescale/mpc8349itx/pci.c | 104 |
6 files changed, 0 insertions, 718 deletions
diff --git a/board/freescale/mpc8349itx/Kconfig b/board/freescale/mpc8349itx/Kconfig deleted file mode 100644 index ce3fffda7d..0000000000 --- a/board/freescale/mpc8349itx/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_MPC8349ITX - -config SYS_BOARD - default "mpc8349itx" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "MPC8349ITX" - -endif diff --git a/board/freescale/mpc8349itx/MAINTAINERS b/board/freescale/mpc8349itx/MAINTAINERS deleted file mode 100644 index d0388ad6e5..0000000000 --- a/board/freescale/mpc8349itx/MAINTAINERS +++ /dev/null @@ -1,8 +0,0 @@ -MPC8349ITX BOARD -#M: - -S: Maintained -F: board/freescale/mpc8349itx/ -F: include/configs/MPC8349ITX.h -F: configs/MPC8349ITX_defconfig -F: configs/MPC8349ITX_LOWBOOT_defconfig -F: configs/MPC8349ITXGP_defconfig diff --git a/board/freescale/mpc8349itx/Makefile b/board/freescale/mpc8349itx/Makefile deleted file mode 100644 index 803cba09ff..0000000000 --- a/board/freescale/mpc8349itx/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) Freescale Semiconductor, Inc. 2006. - -obj-y += mpc8349itx.o -obj-$(CONFIG_PCI) += pci.o diff --git a/board/freescale/mpc8349itx/README b/board/freescale/mpc8349itx/README deleted file mode 100644 index 3012b83737..0000000000 --- a/board/freescale/mpc8349itx/README +++ /dev/null @@ -1,186 +0,0 @@ -Freescale MPC8349E-mITX and MPC8349E-mITX-GP Boards ---------------------------------------------------- - -1. Board Description - - The MPC8349E-mITX and MPC8349E-mITX-GP are reference boards featuring - the Freescale MPC8349E processor in a Mini-ITX form factor. - - The MPC8349E-mITX-GP is an MPC8349E-mITX with the following differences: - - A) One 8MB on-board flash EEPROM chip, instead of two. - B) No SATA controller - C) No Compact Flash slot - D) No Mini-PCI slot - E) No Vitesse 7385 5-port Ethernet switch - F) No 4-port USB Type-A interface - -2. Board Switches and Jumpers - -2.0 Descriptions for all of the board jumpers can be found in the User - Guide. Of particular interest to U-Boot developers is jumper J22: - - Pos. Name Default Description - ----------------------------------------------------------------------- - A LGPL0 ON (0) HRCW source, bit 0 - B LGPL1 ON (0) HRCW source, bit 1 - C LGPL3 ON (0) HRCW source, bit 2 - D LGPL5 OFF (1) PCI_SYNC_OUT frequency - E BOOT1 ON (0) Flash EEPROM boot device - F PCI_M66EN ON (0) PCI 66MHz enable - G I2C-WP ON (0) I2C EEPROM write protection - H F_WP OFF (1) Flash EEPROM write protection - - Jumper J22.E is only for the ITX, and it decides the configuration - of the flash chips. If J22.E is ON (i.e. jumpered), then flash chip - U4 is located at address FE000000 and flash chip U7 is at FE800000. - If J22.E is OFF, then U7 is at FE000000 and U4 is at FE800000. - - For U-Boot development, J22.E can be used to switch back-and-forth - between two U-Boot images. - -3. Memory Map - -3.1. The memory map should look pretty much like this: - - 0x0000_0000 - 0x0FFF_FFFF DDR SDRAM (256 MB) - 0x8000_0000 - 0x9FFF_FFFF PCI1 memory space (512 MB) - 0xA000_0000 - 0xBFFF_FFFF PCI2 memory space (512 MB) - 0xE000_0000 - 0xEFFF_FFFF IMMR (1 MB) - 0xE200_0000 - 0xE2FF_FFFF PCI1 I/O space (16 MB) - 0xE300_0000 - 0xE3FF_FFFF PCI2 I/O space (16 MB) - 0xF000_0000 - 0xF000_FFFF Compact Flash (ITX only) - 0xF001_0000 - 0xF001_FFFF Local bus expansion slot - 0xF800_0000 - 0xF801_FFFF Vitesse 7385 Parallel Interface (ITX only) - 0xFE00_0000 - 0xFE7F_FFFF First 8MB bank of Flash memory - 0xFE80_0000 - 0xFEFF_FFFF Second 8MB bank of Flash memory (ITX only) - -3.2 Flash EEPROM layout. - - On the ITX, jumper J22.E is used to determine which flash chips are - at which address. When J22.E is switched, addresses from FE000000 - to FE7FFFFF are swapped with addresses from FE800000 to FEFFFFFF. - - On the ITX, at the normal boot address (aka HIGHBOOT): - - FE00_0000 HRCW - FE70_0000 Alternative U-Boot image - FE80_0000 Alternative HRCW - FEF0_0000 U-Boot image - FEFF_FFFF End of flash - - On the ITX, at the low boot address (LOWBOOT) - - FE00_0000 HRCW and U-Boot image - FE04_0000 U-Boot environment variables - FE80_0000 Alternative HRCW and U-Boot image - FEFF_FFFF End of flash - - On the ITX-GP, the only option is LOWBOOT and there is only one chip - - FE00_0000 HRCW and U-Boot image - FE04_0000 U-Boot environment variables - F7FF_FFFF End of flash - -4. Definitions - -4.1 Explanation of NEW definitions in: - - include/configs/MPC8349ITX.h - - CONFIG_MPC83xx MPC83xx family - CONFIG_MPC8349 MPC8349 specific - CONFIG_MPC8349ITX MPC8349E-mITX - -5. Compilation - - Assuming you're using BASH shell: - - export CROSS_COMPILE=your-cross-compile-prefix - cd u-boot - make distclean - - make MPC8349ITX_config - or: - make MPC8349ITXGP_config - or: - make MPC8349ITX_LOWBOOT_config - - make - -6. Downloading and Flashing Images - -6.1 Download via tftp: - - tftp $loadaddr <uboot> - - where "<uboot>" is the path and filename, on the TFTP server, of - the U-Boot image. - -6.1 Reflash U-Boot Image using U-Boot - - setenv uboot <uboot> - run tftpflash - - where "<uboot>" is the path and filename, on the TFTP server, of - the U-Boot image. - -6.2 Using the HRCW to switch between two different U-Boot images on the ITX - - Because the ITX has 16MB of flash, it is possible to keep two U-Boot - images in flash, and use the HRCW to specify which one is to be used - when the board boots. This trick is especially effective with a - hardware debugger that can override the HRCW, such as the BDI-2000. - - When the BMS bit in the HRCW is 0, the ITX will boot the U-Boot image - at address FE000000. When the BMS bit is 1, the ITX will boot the - image at address FEF00000. - - Therefore, just put a U-Boot image at both FE000000 and FEF00000 and - change the BMS bit whenever you want to boot the other image. - - Step-by-step instructions: - - 1) Build an ITX image to be loaded at FEF00000 - - make distclean - make MPC8349ITX_config - make - - 2) Take the u-boot.bin image and flash it at FEF00000. - - tftp $loadaddr u-boot.bin - protect off all - erase FEF00000 +$filesize - cp.b $loadaddr FEF00000 $filesize - - 3) Build an ITX image to be loaded at FE000000 - - make distclean - make MPC8349ITX_LOWBOOT_config - make - - 4) Take the u-boot.bin image and flash it at FE000000. - - tftp $loadaddr u-boot.bin - protect off FE000000 +$filesize - erase FE000000 +$filesize - cp.b $loadaddr FE000000 $filesize - - The HRCW in flash is currently set to boot the image at FE000000. - - If you have a hardware debugger, configure it to set the HRCW to - B460A000 04040000 if you want to boot the image at FEF00000, or set - it to B060A000 04040000 if you want to boot the image at FE000000. - - To change the HRCW in flash to boot the image at FEF00000, use these - U-Boot commands: - - cp.b FE000000 1000 10000 ; copy 1st flash sector to 1000 - mw.b 1020 b4 8 ; modify BMS bit - protect off FE000000 +10000 - erase FE000000 +10000 - cp.b 1000 FE000000 10000 - -7. Notes - 1) The console baudrate for MPC8349EITX is 115200bps. diff --git a/board/freescale/mpc8349itx/mpc8349itx.c b/board/freescale/mpc8349itx/mpc8349itx.c deleted file mode 100644 index 5b4c290df1..0000000000 --- a/board/freescale/mpc8349itx/mpc8349itx.c +++ /dev/null @@ -1,402 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) Freescale Semiconductor, Inc. 2006. - */ - -#include <common.h> -#include <fdt_support.h> -#include <init.h> -#include <ioports.h> -#include <log.h> -#include <mpc83xx.h> -#include <i2c.h> -#include <miiphy.h> -#include <vsc7385.h> -#ifdef CONFIG_PCI -#include <asm/mpc8349_pci.h> -#include <pci.h> -#endif -#include <spd_sdram.h> -#include <asm/bitops.h> -#include <asm/global_data.h> -#include <asm/mmu.h> -#if defined(CONFIG_OF_LIBFDT) -#include <linux/libfdt.h> -#endif -#include <linux/delay.h> - -#include "../../../arch/powerpc/cpu/mpc83xx/hrcw/hrcw.h" -#include "../../../arch/powerpc/cpu/mpc83xx/elbc/elbc.h" - -DECLARE_GLOBAL_DATA_PTR; - -#ifndef CONFIG_SPD_EEPROM -/************************************************************************* - * fixed sdram init -- doesn't use serial presence detect. - ************************************************************************/ -int fixed_sdram(void) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - /* The size of RAM, in bytes */ - u32 ddr_size = CONFIG_SYS_DDR_SIZE << 20; - u32 ddr_size_log2 = __ilog2(ddr_size); - - im->sysconf.ddrlaw[0].ar = - LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); - im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & 0xfffff000; - -#if ((CONFIG_SYS_SDRAM_BASE & 0x00FFFFFF) != 0) -#warning Chip select bounds is only configurable in 16MB increments -#endif - im->ddr.csbnds[0].csbnds = - ((CONFIG_SYS_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) | - (((CONFIG_SYS_SDRAM_BASE + ddr_size - 1) >> - CSBNDS_EA_SHIFT) & CSBNDS_EA); - im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG; - - /* Only one CS for DDR */ - im->ddr.cs_config[1] = 0; - im->ddr.cs_config[2] = 0; - im->ddr.cs_config[3] = 0; - - debug("cs0_bnds = 0x%08x\n", im->ddr.csbnds[0].csbnds); - debug("cs0_config = 0x%08x\n", im->ddr.cs_config[0]); - - debug("DDR:bar=0x%08x\n", im->sysconf.ddrlaw[0].bar); - debug("DDR:ar=0x%08x\n", im->sysconf.ddrlaw[0].ar); - - im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;/* Was "2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT" */ - im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR1; - im->ddr.sdram_mode = - (0x0000 << SDRAM_MODE_ESD_SHIFT) | (0x0032 << SDRAM_MODE_SD_SHIFT); - im->ddr.sdram_interval = - (0x0410 << SDRAM_INTERVAL_REFINT_SHIFT) | (0x0100 << - SDRAM_INTERVAL_BSTOPRE_SHIFT); - im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL; - - udelay(200); - - im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; - - debug("DDR:timing_cfg_1=0x%08x\n", im->ddr.timing_cfg_1); - debug("DDR:timing_cfg_2=0x%08x\n", im->ddr.timing_cfg_2); - debug("DDR:sdram_mode=0x%08x\n", im->ddr.sdram_mode); - debug("DDR:sdram_interval=0x%08x\n", im->ddr.sdram_interval); - debug("DDR:sdram_cfg=0x%08x\n", im->ddr.sdram_cfg); - - return CONFIG_SYS_DDR_SIZE; -} -#endif - -#ifdef CONFIG_PCI -/* - * Initialize PCI Devices, report devices found - */ -#ifndef CONFIG_PCI_PNP -static struct pci_config_table pci_mpc83xxmitx_config_table[] = { - { - PCI_ANY_ID, - PCI_ANY_ID, - PCI_ANY_ID, - PCI_ANY_ID, - 0x0f, - PCI_ANY_ID, - pci_cfgfunc_config_device, - { - PCI_ENET0_IOADDR, - PCI_ENET0_MEMADDR, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER} - }, - {} -} -#endif - -volatile static struct pci_controller hose[] = { - { -#ifndef CONFIG_PCI_PNP - config_table:pci_mpc83xxmitx_config_table, -#endif - }, - { -#ifndef CONFIG_PCI_PNP - config_table:pci_mpc83xxmitx_config_table, -#endif - } -}; -#endif /* CONFIG_PCI */ - -int dram_init(void) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - u32 msize = 0; -#ifdef CONFIG_DDR_ECC - volatile ddr83xx_t *ddr = &im->ddr; -#endif - - if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) - return -ENXIO; - - /* DDR SDRAM - Main SODIMM */ - im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & LAWBAR_BAR; -#ifdef CONFIG_SPD_EEPROM - msize = spd_sdram(); -#else - msize = fixed_sdram(); -#endif - -#ifdef CONFIG_DDR_ECC - if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) - /* Unlike every other board, on the 83xx spd_sdram() returns - megabytes instead of just bytes. That's why we need to - multiple by 1MB when calling ddr_enable_ecc(). */ - ddr_enable_ecc(msize * 1048576); -#endif - - /* return total bus RAM size(bytes) */ - gd->ram_size = msize * 1024 * 1024; - - return 0; -} - -int checkboard(void) -{ -#ifdef CONFIG_TARGET_MPC8349ITX - puts("Board: Freescale MPC8349E-mITX\n"); -#else - puts("Board: Freescale MPC8349E-mITX-GP\n"); -#endif - - return 0; -} - -/* - * Implement a work-around for a hardware problem with compact - * flash. - * - * Program the UPM if compact flash is enabled. - */ -int misc_init_f(void) -{ -#ifdef CONFIG_VSC7385_ENET - volatile u32 *vsc7385_cpuctrl; - - /* 0x1c0c0 is the VSC7385 CPU Control (CPUCTRL) Register. The power up - default of VSC7385 L1_IRQ and L2_IRQ requests are active high. That - means it is 0 when the IRQ is not active. This makes the wire-AND - logic always assert IRQ7 to CPU even if there is no request from the - switch. Since the compact flash and the switch share the same IRQ, - the Linux kernel will think that the compact flash is requesting irq - and get stuck when it tries to clear the IRQ. Thus we need to set - the L2_IRQ0 and L2_IRQ1 to active low. - - The following code sets the L1_IRQ and L2_IRQ polarity to active low. - Without this code, compact flash will not work in Linux because - unlike U-Boot, Linux uses the IRQ, so this code is necessary if we - don't enable compact flash for U-Boot. - */ - - vsc7385_cpuctrl = (volatile u32 *)(CONFIG_SYS_VSC7385_BASE + 0x1c0c0); - *vsc7385_cpuctrl |= 0x0c; -#endif - -#ifdef CONFIG_COMPACT_FLASH - /* UPM Table Configuration Code */ - static uint UPMATable[] = { - 0xcffffc00, 0x0fffff00, 0x0fafff00, 0x0fafff00, - 0x0faffd00, 0x0faffc04, 0x0ffffc00, 0x3ffffc01, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfff7fc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - 0xcffffc00, 0x0fffff00, 0x0ff3ff00, 0x0ff3ff00, - 0x0ff3fe00, 0x0ffffc00, 0x3ffffc05, 0xfffffc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01 - }; - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - - set_lbc_br(3, CONFIG_SYS_BR3_PRELIM); - set_lbc_or(3, CONFIG_SYS_OR3_PRELIM); - - /* Program the MAMR. RFEN=0, OP=00, UWPL=1, AM=000, DS=01, G0CL=000, - GPL4=0, RLF=0001, WLF=0001, TLF=0001, MAD=000000 - */ - immap->im_lbc.mamr = 0x08404440; - - upmconfig(0, UPMATable, sizeof(UPMATable) / sizeof(UPMATable[0])); - - puts("UPMA: Configured for compact flash\n"); -#endif - - return 0; -} - -/* - * Miscellaneous late-boot configurations - * - * Make sure the EEPROM has the HRCW correctly programmed. - * Make sure the RTC is correctly programmed. - * - * The MPC8349E-mITX can be configured to load the HRCW from - * EEPROM instead of flash. This is controlled via jumpers - * LGPL0, 1, and 3. Normally, these jumpers are set to 000 (all - * jumpered), but if they're set to 001 or 010, then the HRCW is - * read from the "I2C EEPROM". - * - * This function makes sure that the I2C EEPROM is programmed - * correctly. - * - * If a VSC7385 microcode image is present, then upload it. - */ -int misc_init_r(void) -{ - int rc = 0; - -#if defined(CONFIG_SYS_I2C) - unsigned int orig_bus = i2c_get_bus_num(); - u8 i2c_data; - -#ifdef CONFIG_SYS_I2C_RTC_ADDR - u8 ds1339_data[17]; -#endif - -#ifdef CONFIG_SYS_I2C_EEPROM_ADDR - static u8 eeprom_data[] = /* HRCW data */ - { - 0xAA, 0x55, 0xAA, /* Preamble */ - 0x7C, /* ACS=0, BYTE_EN=1111, CONT=1 */ - 0x02, 0x40, /* RCWL ADDR=0x0_0900 */ - (CONFIG_SYS_HRCW_LOW >> 24) & 0xFF, - (CONFIG_SYS_HRCW_LOW >> 16) & 0xFF, - (CONFIG_SYS_HRCW_LOW >> 8) & 0xFF, - CONFIG_SYS_HRCW_LOW & 0xFF, - 0x7C, /* ACS=0, BYTE_EN=1111, CONT=1 */ - 0x02, 0x41, /* RCWH ADDR=0x0_0904 */ - (CONFIG_SYS_HRCW_HIGH >> 24) & 0xFF, - (CONFIG_SYS_HRCW_HIGH >> 16) & 0xFF, - (CONFIG_SYS_HRCW_HIGH >> 8) & 0xFF, - CONFIG_SYS_HRCW_HIGH & 0xFF - }; - - u8 data[sizeof(eeprom_data)]; -#endif - - printf("Board revision: "); - i2c_set_bus_num(1); - if (i2c_read(CONFIG_SYS_I2C_8574A_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0) - printf("%u.%u (PCF8475A)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01); - else if (i2c_read(CONFIG_SYS_I2C_8574_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0) - printf("%u.%u (PCF8475)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01); - else { - printf("Unknown\n"); - rc = 1; - } - -#ifdef CONFIG_SYS_I2C_EEPROM_ADDR - i2c_set_bus_num(0); - - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, data, sizeof(data)) == 0) { - if (memcmp(data, eeprom_data, sizeof(data)) != 0) { - if (i2c_write - (CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, eeprom_data, - sizeof(eeprom_data)) != 0) { - puts("Failure writing the HRCW to EEPROM via I2C.\n"); - rc = 1; - } - } - } else { - puts("Failure reading the HRCW from EEPROM via I2C.\n"); - rc = 1; - } -#endif - -#ifdef CONFIG_SYS_I2C_RTC_ADDR - i2c_set_bus_num(1); - - if (i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, ds1339_data, sizeof(ds1339_data)) - == 0) { - - /* Work-around for MPC8349E-mITX bug #13601. - If the RTC does not contain valid register values, the DS1339 - Linux driver will not work. - */ - - /* Make sure status register bits 6-2 are zero */ - ds1339_data[0x0f] &= ~0x7c; - - /* Check for a valid day register value */ - ds1339_data[0x03] &= ~0xf8; - if (ds1339_data[0x03] == 0) { - ds1339_data[0x03] = 1; - } - - /* Check for a valid date register value */ - ds1339_data[0x04] &= ~0xc0; - if ((ds1339_data[0x04] == 0) || - ((ds1339_data[0x04] & 0x0f) > 9) || - (ds1339_data[0x04] >= 0x32)) { - ds1339_data[0x04] = 1; - } - - /* Check for a valid month register value */ - ds1339_data[0x05] &= ~0x60; - - if ((ds1339_data[0x05] == 0) || - ((ds1339_data[0x05] & 0x0f) > 9) || - ((ds1339_data[0x05] >= 0x13) - && (ds1339_data[0x05] <= 0x19))) { - ds1339_data[0x05] = 1; - } - - /* Enable Oscillator and rate select */ - ds1339_data[0x0e] = 0x1c; - - /* Work-around for MPC8349E-mITX bug #13330. - Ensure that the RTC control register contains the value 0x1c. - This affects SATA performance. - */ - - if (i2c_write - (CONFIG_SYS_I2C_RTC_ADDR, 0, 1, ds1339_data, - sizeof(ds1339_data))) { - puts("Failure writing to the RTC via I2C.\n"); - rc = 1; - } - } else { - puts("Failure reading from the RTC via I2C.\n"); - rc = 1; - } -#endif - - i2c_set_bus_num(orig_bus); -#endif - -#ifdef CONFIG_VSC7385_IMAGE - if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE, - CONFIG_VSC7385_IMAGE_SIZE)) { - puts("Failure uploading VSC7385 microcode.\n"); - rc = 1; - } -#endif - - return rc; -} - -#if defined(CONFIG_OF_BOARD_SETUP) -int ft_board_setup(void *blob, struct bd_info *bd) -{ - ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI - ft_pci_setup(blob, bd); -#endif - - return 0; -} -#endif diff --git a/board/freescale/mpc8349itx/pci.c b/board/freescale/mpc8349itx/pci.c deleted file mode 100644 index a09b658688..0000000000 --- a/board/freescale/mpc8349itx/pci.c +++ /dev/null @@ -1,104 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2006-2009 Freescale Semiconductor, Inc. - */ - -#include <common.h> -#include <init.h> -#include <linux/delay.h> - -#include <asm/mmu.h> -#include <asm/io.h> -#include <mpc83xx.h> -#include <pci.h> -#include <i2c.h> -#include <asm/fsl_i2c.h> - -static struct pci_region pci1_regions[] = { - { - bus_start: CONFIG_SYS_PCI1_MEM_BASE, - phys_start: CONFIG_SYS_PCI1_MEM_PHYS, - size: CONFIG_SYS_PCI1_MEM_SIZE, - flags: PCI_REGION_MEM | PCI_REGION_PREFETCH - }, - { - bus_start: CONFIG_SYS_PCI1_IO_BASE, - phys_start: CONFIG_SYS_PCI1_IO_PHYS, - size: CONFIG_SYS_PCI1_IO_SIZE, - flags: PCI_REGION_IO - }, - { - bus_start: CONFIG_SYS_PCI1_MMIO_BASE, - phys_start: CONFIG_SYS_PCI1_MMIO_PHYS, - size: CONFIG_SYS_PCI1_MMIO_SIZE, - flags: PCI_REGION_MEM - }, -}; - -#ifdef CONFIG_MPC83XX_PCI2 -static struct pci_region pci2_regions[] = { - { - bus_start: CONFIG_SYS_PCI2_MEM_BASE, - phys_start: CONFIG_SYS_PCI2_MEM_PHYS, - size: CONFIG_SYS_PCI2_MEM_SIZE, - flags: PCI_REGION_MEM | PCI_REGION_PREFETCH - }, - { - bus_start: CONFIG_SYS_PCI2_IO_BASE, - phys_start: CONFIG_SYS_PCI2_IO_PHYS, - size: CONFIG_SYS_PCI2_IO_SIZE, - flags: PCI_REGION_IO - }, - { - bus_start: CONFIG_SYS_PCI2_MMIO_BASE, - phys_start: CONFIG_SYS_PCI2_MMIO_PHYS, - size: CONFIG_SYS_PCI2_MMIO_SIZE, - flags: PCI_REGION_MEM - }, -}; -#endif - -void pci_init_board(void) -{ - volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR; - volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; - volatile law83xx_t *pci_law = immr->sysconf.pcilaw; -#ifndef CONFIG_MPC83XX_PCI2 - struct pci_region *reg[] = { pci1_regions }; -#else - struct pci_region *reg[] = { pci1_regions, pci2_regions }; -#endif - u8 reg8; - -#if defined(CONFIG_SYS_I2C) - i2c_set_bus_num(1); - /* Read the PCI_M66EN jumper setting */ - if ((i2c_read(CONFIG_SYS_I2C_8574_ADDR2, 0, 0, ®8, sizeof(reg8)) == 0) || - (i2c_read(CONFIG_SYS_I2C_8574A_ADDR2, 0, 0, ®8, sizeof(reg8)) == 0)) { - if (reg8 & I2C_8574_PCI66) - clk->occr = 0xff000000; /* 66 MHz PCI */ - else - clk->occr = 0xff600001; /* 33 MHz PCI */ - } else { - clk->occr = 0xff600001; /* 33 MHz PCI */ - } -#else - clk->occr = 0xff000000; /* 66 MHz PCI */ -#endif - udelay(2000); - - /* Configure PCI Local Access Windows */ - pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR; - pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G; - - pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR; - pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_32M; - - udelay(2000); - -#ifndef CONFIG_MPC83XX_PCI2 - mpc83xx_pci_init(1, reg); -#else - mpc83xx_pci_init(2, reg); -#endif -} |