diff options
author | Patrick Delaunay <patrick.delaunay@st.com> | 2020-01-28 12:11:04 +0300 |
---|---|---|
committer | Patrick Delaunay <patrick.delaunay@st.com> | 2020-02-13 19:26:23 +0300 |
commit | a21a6ba4337fe14fbe23f2507eae4a11f127f8d5 (patch) | |
tree | b6dd1564ae3e1d02084311557b0b0030a68fc95f /board | |
parent | 8d93a9755f9648acd8406edc5f5ca9f06ffb0f1c (diff) | |
download | u-boot-a21a6ba4337fe14fbe23f2507eae4a11f127f8d5.tar.xz |
board: stm32mp1: update readme
Update readme:
- list the supported SOC and change family to STM32MP15x
- add warning on OTP write and prerequisite:
check if MAC address is not yet provisioned.
- Use filesize for mmc write command (avoid to write all partition
with ${partsize}). ${filesize} and ${partsize} are set by previous
load command.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Diffstat (limited to 'board')
-rw-r--r-- | board/st/stm32mp1/README | 52 |
1 files changed, 34 insertions, 18 deletions
diff --git a/board/st/stm32mp1/README b/board/st/stm32mp1/README index f2069bcefa..5d7465a8c8 100644 --- a/board/st/stm32mp1/README +++ b/board/st/stm32mp1/README @@ -3,8 +3,8 @@ SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause # Copyright (C) 2018 STMicroelectronics - All Rights Reserved # -U-Boot on STMicroelectronics STM32MP1 -====================================== +U-Boot on STMicroelectronics STM32MP15x +======================================= 1. Summary ========== @@ -12,12 +12,12 @@ This is a quick instruction for setup stm32mp1 boards. 2. Supported devices ==================== -U-Boot supports one STMP32MP1 SoCs: STM32MP157 +U-Boot supports STMP32MP15x SoCs: STM32MP157, STM32MP153 and STM32MP151 -The STM32MP157 is a Cortex-A MPU aimed at various applications. +The STM32MP15x is a Cortex-A MPU aimed at various applications. It features: -- Dual core Cortex-A7 application core -- 2D/3D image composition with GPU +- Dual core Cortex-A7 application core (Single on STM32MP151) +- 2D/3D image composition with GPU (only on STM32MP157) - Standard memories interface support - Standard connectivity, widely inherited from the STM32 MCU family - Comprehensive security support @@ -37,11 +37,11 @@ And the necessary drivers 4. Fuse Currently the following boards are supported: -+ stm32mp157c-ev1 -+ stm32mp157c-ed1 -+ stm32mp157a-dk1 -+ stm32mp157c-dk2 -+ stm32mp157a-avenger96 ++ stm32mp157a-avenger96.dts ++ stm32mp157a-dk1.dts ++ stm32mp157c-dk2.dts ++ stm32mp157c-ed1.dts ++ stm32mp157c-ev1.dts 3. Boot Sequences ================= @@ -74,7 +74,7 @@ with FSBL = First Stage Bootloader U-Boot is running in secure mode and provide a secure monitor to the kernel with only PSCI support (Power State Coordination Interface defined by ARM). -All the STM32MP1 boards supported by U-Boot use the same generic board +All the STM32MP15x boards supported by U-Boot use the same generic board stm32mp1 which support all the bootable devices. Each board is configurated only with the associated device tree. @@ -108,7 +108,7 @@ the supported device trees for stm32mp157 are: + install package needed in U-Boot makefile (libssl-dev, swig, libpython-dev...) + install ARMv7 toolchain for 32bit Cortex-A (from Linaro, - from SDK for STM32MP1, or any crosstoolchains from your distribution) + from SDK for STM32MP15x, or any crosstoolchains from your distribution) 2. Set the cross compiler: @@ -323,8 +323,7 @@ c) copy U-Boot in first GPT partition of eMMC # ext4load mmc 0:4 0xC0000000 u-boot.img # mmc dev 1 # part start mmc 1 1 partstart - # part size mmc 1 1 partsize - # mmc write ${fileaddr} ${partstart} ${partsize} + # mmc write ${fileaddr} ${partstart} ${filesize} To boot from eMMC, select BootPinMode = 0 1 0 and reset. @@ -334,14 +333,27 @@ To boot from eMMC, select BootPinMode = 0 1 0 and reset. Please read doc/README.enetaddr for the implementation guidelines for mac id usage. Basically, environment has precedence over board specific storage. -Mac id storage and retrieval in stm32mp otp : +For STMicroelectonics board, it is retrieved in STM32MP15x otp : - OTP_57[31:0] = MAC_ADDR[31:0] - OTP_58[15:0] = MAC_ADDR[47:32] To program a MAC address on virgin OTP words above, you can use the fuse command on bank 0 to access to internal OTP: - example to set mac address "12:34:56:78:9a:bc" + Prerequisite: check if a MAC address isn't yet programmed in OTP + + 1- check OTP: their value must be equal to 0 + + STM32MP> fuse sense 0 57 2 + Sensing bank 0: + Word 0x00000039: 00000000 00000000 + + 2- check environment variable + + STM32MP> env print ethaddr + ## Error: "ethaddr" not defined + + Example to set mac address "12:34:56:78:9a:bc" 1- Write OTP STM32MP> fuse prog -y 0 57 0x78563412 0x0000bc9a @@ -355,9 +367,13 @@ on bank 0 to access to internal OTP: ### Setting environment from OTP MAC address = "12:34:56:78:9a:bc" 4 check env update - STM32MP> print ethaddr + STM32MP> env print ethaddr ethaddr=12:34:56:78:9a:bc +warning:: This MAC address provisioning can't be executed twice on the same + board as the OTP are protected. It is already done for the board + provided by STMicroelectronics. + 10. Coprocessor firmware ======================== |