imx: remove woodburn board

Board is not longer used, remove it.

Signed-off-by: Stefano Babic <sbabic@denx.de>

6 files changed, 0 insertions, 324 deletions

diff --git a/board/woodburn/Kconfig b/board/woodburn/Kconfig
deleted file mode 100644
index 4699526cfd..0000000000
--- a/board/woodburn/Kconfig
+++ /dev/null
@@ -1,25 +0,0 @@
-if TARGET_WOODBURN
-
-config SYS_BOARD
-	default "woodburn"
-
-config SYS_SOC
-	default "mx35"
-
-config SYS_CONFIG_NAME
-	default "woodburn"
-
-endif
-
-if TARGET_WOODBURN_SD
-
-config SYS_BOARD
-	default "woodburn"
-
-config SYS_SOC
-	default "mx35"
-
-config SYS_CONFIG_NAME
-	default "woodburn_sd"
-
-endif
diff --git a/board/woodburn/MAINTAINERS b/board/woodburn/MAINTAINERS
deleted file mode 100644
index 4fbf6bb88b..0000000000
--- a/board/woodburn/MAINTAINERS
+++ /dev/null
@@ -1,12 +0,0 @@
-WOODBURN BOARD
-M:	Stefano Babic <sbabic@denx.de>
-S:	Maintained
-F:	board/woodburn/
-F:	include/configs/woodburn.h
-F:	configs/woodburn_defconfig
-
-WOODBURN_SD BOARD
-#M:	-
-S:	Maintained
-F:	include/configs/woodburn_sd.h
-F:	configs/woodburn_sd_defconfig
diff --git a/board/woodburn/Makefile b/board/woodburn/Makefile
deleted file mode 100644
index 9c3cd6934a..0000000000
--- a/board/woodburn/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
-#
-# (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
-
-obj-y	:= woodburn.o
-obj-y	+= lowlevel_init.o
diff --git a/board/woodburn/imximage.cfg b/board/woodburn/imximage.cfg
deleted file mode 100644
index ba42a5e7d5..0000000000
--- a/board/woodburn/imximage.cfg
+++ /dev/null
@@ -1,4 +0,0 @@
-BOOT_FROM      sd
-
-/* DDR2 init */
-DATA 4 0xB8001010 0x00000304
diff --git a/board/woodburn/lowlevel_init.S b/board/woodburn/lowlevel_init.S
deleted file mode 100644
index 8186b3922b..0000000000
--- a/board/woodburn/lowlevel_init.S
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
- *
- * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * Copyright (C) 2011, Stefano Babic <sbabic@denx.de>
- */
-
-#include <config.h>
-#include <asm/arch/lowlevel_macro.S>
-
-.globl lowlevel_init
-lowlevel_init:
-
-	core_init
-
-	init_aips
-
-	init_max
-
-	init_m3if
-
-	mov pc, lr
diff --git a/board/woodburn/woodburn.c b/board/woodburn/woodburn.c
deleted file mode 100644
index c69df6c7bf..0000000000
--- a/board/woodburn/woodburn.c
+++ /dev/null
@@ -1,251 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2012, Stefano Babic <sbabic@denx.de>
- *
- * Based on flea3.c and mx35pdk.c
- */
-
-#include <common.h>
-#include <init.h>
-#include <asm/io.h>
-#include <linux/errno.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/iomux-mx35.h>
-#include <i2c.h>
-#include <power/pmic.h>
-#include <fsl_pmic.h>
-#include <mc13892.h>
-#include <mmc.h>
-#include <fsl_esdhc_imx.h>
-#include <linux/types.h>
-#include <asm/gpio.h>
-#include <asm/arch/sys_proto.h>
-#include <netdev.h>
-#include <spl.h>
-
-#define CCM_CCMR_CONFIG		0x003F4208
-
-#define ESDCTL_DDR2_CONFIG	0x007FFC3F
-
-/* For MMC */
-#define GPIO_MMC_CD	7
-#define GPIO_MMC_WP	8
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1,
-		PHYS_SDRAM_1_SIZE);
-
-	return 0;
-}
-
-static void board_setup_sdram(void)
-{
-	struct esdc_regs *esdc = (struct esdc_regs *)ESDCTL_BASE_ADDR;
-
-	/* Initialize with default values both CSD0/1 */
-	writel(0x2000, &esdc->esdctl0);
-	writel(0x2000, &esdc->esdctl1);
-
-	mx3_setup_sdram_bank(CSD0_BASE_ADDR, ESDCTL_DDR2_CONFIG,
-		 13, 10, 2, 0x8080);
-}
-
-static void setup_iomux_fec(void)
-{
-	static const iomux_v3_cfg_t fec_pads[] = {
-		MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
-		MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
-		MX35_PAD_FEC_RX_DV__FEC_RX_DV,
-		MX35_PAD_FEC_COL__FEC_COL,
-		MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
-		MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
-		MX35_PAD_FEC_TX_EN__FEC_TX_EN,
-		MX35_PAD_FEC_MDC__FEC_MDC,
-		MX35_PAD_FEC_MDIO__FEC_MDIO,
-		MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
-		MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
-		MX35_PAD_FEC_CRS__FEC_CRS,
-		MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
-		MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
-		MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
-		MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
-		MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
-		MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
-	};
-
-	/* setup pins for FEC */
-	imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
-}
-
-int woodburn_init(void)
-{
-	struct ccm_regs *ccm =
-		(struct ccm_regs *)IMX_CCM_BASE;
-
-	/* initialize PLL and clock configuration */
-	writel(CCM_CCMR_CONFIG, &ccm->ccmr);
-
-	/* Set-up RAM */
-	board_setup_sdram();
-
-	/* enable clocks */
-	writel(readl(&ccm->cgr0) |
-		MXC_CCM_CGR0_EMI_MASK |
-		MXC_CCM_CGR0_EDIO_MASK |
-		MXC_CCM_CGR0_EPIT1_MASK,
-		&ccm->cgr0);
-
-	writel(readl(&ccm->cgr1) |
-		MXC_CCM_CGR1_FEC_MASK |
-		MXC_CCM_CGR1_GPIO1_MASK |
-		MXC_CCM_CGR1_GPIO2_MASK |
-		MXC_CCM_CGR1_GPIO3_MASK |
-		MXC_CCM_CGR1_I2C1_MASK |
-		MXC_CCM_CGR1_I2C2_MASK |
-		MXC_CCM_CGR1_I2C3_MASK,
-		&ccm->cgr1);
-
-	/* Set-up NAND */
-	__raw_writel(readl(&ccm->rcsr) | MXC_CCM_RCSR_NFC_FMS, &ccm->rcsr);
-
-	/* Set pinmux for the required peripherals */
-	setup_iomux_fec();
-
-	/* setup GPIO1_4 FEC_ENABLE signal */
-	imx_iomux_v3_setup_pad(MX35_PAD_SCKR__GPIO1_4);
-	gpio_direction_output(4, 1);
-	imx_iomux_v3_setup_pad(MX35_PAD_HCKT__GPIO1_9);
-	gpio_direction_output(9, 1);
-
-	return 0;
-}
-
-#if defined(CONFIG_SPL_BUILD)
-void board_init_f(ulong dummy)
-{
-	/* Set the stack pointer. */
-	asm volatile("mov sp, %0\n" : : "r"(CONFIG_SPL_STACK));
-
-	/* Initialize MUX and SDRAM */
-	woodburn_init();
-
-	/* Clear the BSS. */
-	memset(__bss_start, 0, __bss_end - __bss_start);
-
-	preloader_console_init();
-	timer_init();
-
-	board_init_r(NULL, 0);
-}
-
-void spl_board_init(void)
-{
-}
-
-#endif
-
-
-/* Booting from NOR in external mode */
-int board_early_init_f(void)
-{
-	return woodburn_init();
-}
-
-
-int board_init(void)
-{
-	struct pmic *p;
-	u32 val;
-	int ret;
-
-	/* address of boot parameters */
-	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
-	ret = pmic_init(I2C_PMIC);
-	if (ret)
-		return ret;
-
-	p = pmic_get("FSL_PMIC");
-
-	/*
-	 * Set switchers in Auto in NORMAL mode & STANDBY mode
-	 * Setup the switcher mode for SW1 & SW2
-	 */
-	pmic_reg_read(p, REG_SW_4, &val);
-	val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) |
-		(SWMODE_MASK << SWMODE2_SHIFT)));
-	val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) |
-		(SWMODE_AUTO_AUTO << SWMODE2_SHIFT);
-	/* Set SWILIMB */
-	val |= (1 << 22);
-	pmic_reg_write(p, REG_SW_4, val);
-
-	/* Setup the switcher mode for SW3 & SW4 */
-	pmic_reg_read(p, REG_SW_5, &val);
-	val &= ~((SWMODE_MASK << SWMODE4_SHIFT) |
-		(SWMODE_MASK << SWMODE3_SHIFT));
-	val |= (SWMODE_AUTO_AUTO << SWMODE4_SHIFT) |
-		(SWMODE_AUTO_AUTO << SWMODE3_SHIFT);
-	pmic_reg_write(p, REG_SW_5, val);
-
-	/* Set VGEN1 to 3.15V */
-	pmic_reg_read(p, REG_SETTING_0, &val);
-	val &= ~(VGEN1_MASK);
-	val |= VGEN1_3_15;
-	pmic_reg_write(p, REG_SETTING_0, val);
-
-	pmic_reg_read(p, REG_MODE_0, &val);
-	val |= VGEN1EN;
-	pmic_reg_write(p, REG_MODE_0, val);
-	udelay(2000);
-
-	return 0;
-}
-
-#if defined(CONFIG_FSL_ESDHC_IMX)
-struct fsl_esdhc_cfg esdhc_cfg = {MMC_SDHC1_BASE_ADDR};
-
-int board_mmc_init(bd_t *bis)
-{
-	static const iomux_v3_cfg_t sdhc1_pads[] = {
-		MX35_PAD_SD1_CMD__ESDHC1_CMD,
-		MX35_PAD_SD1_CLK__ESDHC1_CLK,
-		MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
-		MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
-		MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
-		MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
-	};
-
-	/* configure pins for SDHC1 only */
-	imx_iomux_v3_setup_multiple_pads(sdhc1_pads, ARRAY_SIZE(sdhc1_pads));
-
-	/* MMC Card Detect on GPIO1_7 */
-	imx_iomux_v3_setup_pad(MX35_PAD_SCKT__GPIO1_7);
-	gpio_direction_input(GPIO_MMC_CD);
-
-	/* MMC Write Protection on GPIO1_8 */
-	imx_iomux_v3_setup_pad(MX35_PAD_FST__GPIO1_8);
-	gpio_direction_input(GPIO_MMC_WP);
-
-	esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
-
-	return fsl_esdhc_initialize(bis, &esdhc_cfg);
-}
-
-int board_mmc_getcd(struct mmc *mmc)
-{
-	return !gpio_get_value(GPIO_MMC_CD);
-}
-#endif
-
-u32 get_board_rev(void)
-{
-	int rev = 0;
-
-	return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8;
-}