arm: Remove flea3 board

This board has not been converted to CONFIG_DM by the deadline.
Remove it.  As this is the last mx35 platform, remove that support as
well.

Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Stefano Babic <sbabic@denx.de>

5 files changed, 0 insertions, 280 deletions

diff --git a/board/CarMediaLab/flea3/Kconfig b/board/CarMediaLab/flea3/Kconfig
deleted file mode 100644
index 7113f2b51f..0000000000
--- a/board/CarMediaLab/flea3/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_FLEA3
-
-config SYS_BOARD
-	default "flea3"
-
-config SYS_VENDOR
-	default "CarMediaLab"
-
-config SYS_SOC
-	default "mx35"
-
-config SYS_CONFIG_NAME
-	default "flea3"
-
-endif
diff --git a/board/CarMediaLab/flea3/MAINTAINERS b/board/CarMediaLab/flea3/MAINTAINERS
deleted file mode 100644
index c7b0df7bc4..0000000000
--- a/board/CarMediaLab/flea3/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-FLEA3 BOARD
-M:	Stefano Babic <sbabic@denx.de>
-S:	Maintained
-F:	board/CarMediaLab/flea3/
-F:	include/configs/flea3.h
-F:	configs/flea3_defconfig
diff --git a/board/CarMediaLab/flea3/Makefile b/board/CarMediaLab/flea3/Makefile
deleted file mode 100644
index edaac8683b..0000000000
--- a/board/CarMediaLab/flea3/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
-#
-# (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
-
-obj-y	:= flea3.o
-obj-y	+= lowlevel_init.o
diff --git a/board/CarMediaLab/flea3/flea3.c b/board/CarMediaLab/flea3/flea3.c
deleted file mode 100644
index ecd70ecbdc..0000000000
--- a/board/CarMediaLab/flea3/flea3.c
+++ /dev/null
@@ -1,227 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
- *
- * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * Copyright (C) 2011, Stefano Babic <sbabic@denx.de>
- */
-
-#include <common.h>
-#include <init.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include <env.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/iomux-mx35.h>
-#include <i2c.h>
-#include <linux/types.h>
-#include <asm/gpio.h>
-#include <asm/arch/sys_proto.h>
-#include <netdev.h>
-#include <fdt_support.h>
-#include <mtd_node.h>
-#include <jffs2/load_kernel.h>
-
-#ifndef CONFIG_BOARD_EARLY_INIT_F
-#error "CONFIG_BOARD_EARLY_INIT_F must be set for this board"
-#endif
-
-#define CCM_CCMR_CONFIG		0x003F4208
-
-#define ESDCTL_DDR2_CONFIG	0x007FFC3F
-
-static inline void dram_wait(unsigned int count)
-{
-	volatile unsigned int wait = count;
-
-	while (wait--)
-		;
-}
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1,
-		PHYS_SDRAM_1_SIZE);
-
-	return 0;
-}
-
-static void board_setup_sdram(void)
-{
-	struct esdc_regs *esdc = (struct esdc_regs *)ESDCTL_BASE_ADDR;
-
-	/* Initialize with default values both CSD0/1 */
-	writel(0x2000, &esdc->esdctl0);
-	writel(0x2000, &esdc->esdctl1);
-
-
-	mx3_setup_sdram_bank(CSD0_BASE_ADDR, ESDCTL_DDR2_CONFIG,
-			     13, 10, 2, 0x8080);
-}
-
-static void setup_iomux_uart3(void)
-{
-	static const iomux_v3_cfg_t uart3_pads[] = {
-		MX35_PAD_RTS2__UART3_RXD_MUX,
-		MX35_PAD_CTS2__UART3_TXD_MUX,
-	};
-
-	imx_iomux_v3_setup_multiple_pads(uart3_pads, ARRAY_SIZE(uart3_pads));
-}
-
-#define I2C_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_ODE)
-
-static void setup_iomux_i2c(void)
-{
-	static const iomux_v3_cfg_t i2c_pads[] = {
-		NEW_PAD_CTRL(MX35_PAD_I2C1_CLK__I2C1_SCL, I2C_PAD_CTRL),
-		NEW_PAD_CTRL(MX35_PAD_I2C1_DAT__I2C1_SDA, I2C_PAD_CTRL),
-
-		NEW_PAD_CTRL(MX35_PAD_TX3_RX2__I2C3_SCL, I2C_PAD_CTRL),
-		NEW_PAD_CTRL(MX35_PAD_TX2_RX3__I2C3_SDA, I2C_PAD_CTRL),
-	};
-
-	imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads));
-}
-
-
-static void setup_iomux_spi(void)
-{
-	static const iomux_v3_cfg_t spi_pads[] = {
-		MX35_PAD_CSPI1_MOSI__CSPI1_MOSI,
-		MX35_PAD_CSPI1_MISO__CSPI1_MISO,
-		MX35_PAD_CSPI1_SS0__CSPI1_SS0,
-		MX35_PAD_CSPI1_SS1__CSPI1_SS1,
-		MX35_PAD_CSPI1_SCLK__CSPI1_SCLK,
-	};
-
-	imx_iomux_v3_setup_multiple_pads(spi_pads, ARRAY_SIZE(spi_pads));
-}
-
-static void setup_iomux_fec(void)
-{
-	static const iomux_v3_cfg_t fec_pads[] = {
-		MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
-		MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
-		MX35_PAD_FEC_RX_DV__FEC_RX_DV,
-		MX35_PAD_FEC_COL__FEC_COL,
-		MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
-		MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
-		MX35_PAD_FEC_TX_EN__FEC_TX_EN,
-		MX35_PAD_FEC_MDC__FEC_MDC,
-		MX35_PAD_FEC_MDIO__FEC_MDIO,
-		MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
-		MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
-		MX35_PAD_FEC_CRS__FEC_CRS,
-		MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
-		MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
-		MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
-		MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
-		MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
-		MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
-		/* GPIO used to power off ethernet */
-		MX35_PAD_STXFS4__GPIO2_31,
-	};
-
-	/* setup pins for FEC */
-	imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
-}
-
-int board_early_init_f(void)
-{
-	struct ccm_regs *ccm =
-		(struct ccm_regs *)IMX_CCM_BASE;
-
-	/* setup GPIO3_1 to set HighVCore signal */
-	imx_iomux_v3_setup_pad(MX35_PAD_ATA_DA1__GPIO3_1);
-	gpio_direction_output(65, 1);
-
-	/* initialize PLL and clock configuration */
-	writel(CCM_CCMR_CONFIG, &ccm->ccmr);
-
-	writel(CCM_MPLL_532_HZ, &ccm->mpctl);
-	writel(CCM_PPLL_300_HZ, &ccm->ppctl);
-
-	/* Set the core to run at 532 Mhz */
-	writel(0x00001000, &ccm->pdr0);
-
-	/* Set-up RAM */
-	board_setup_sdram();
-
-	/* enable clocks */
-	writel(readl(&ccm->cgr0) |
-		MXC_CCM_CGR0_EMI_MASK |
-		MXC_CCM_CGR0_EDIO_MASK |
-		MXC_CCM_CGR0_EPIT1_MASK,
-		&ccm->cgr0);
-
-	writel(readl(&ccm->cgr1) |
-		MXC_CCM_CGR1_FEC_MASK |
-		MXC_CCM_CGR1_GPIO1_MASK |
-		MXC_CCM_CGR1_GPIO2_MASK |
-		MXC_CCM_CGR1_GPIO3_MASK |
-		MXC_CCM_CGR1_I2C1_MASK |
-		MXC_CCM_CGR1_I2C2_MASK |
-		MXC_CCM_CGR1_I2C3_MASK,
-		&ccm->cgr1);
-
-	/* Set-up NAND */
-	__raw_writel(readl(&ccm->rcsr) | MXC_CCM_RCSR_NFC_FMS, &ccm->rcsr);
-
-	/* Set pinmux for the required peripherals */
-	setup_iomux_uart3();
-	setup_iomux_i2c();
-	setup_iomux_fec();
-	setup_iomux_spi();
-
-	return 0;
-}
-
-int board_init(void)
-{
-	/* address of boot parameters */
-	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
-	/* Enable power for ethernet */
-	gpio_direction_output(63, 0);
-
-	udelay(2000);
-
-	return 0;
-}
-
-#ifdef CONFIG_REVISION_TAG
-u32 get_board_rev(void)
-{
-	int rev = 0;
-
-	return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8;
-}
-#endif
-
-/*
- * called prior to booting kernel or by 'fdt boardsetup' command
- *
- */
-int ft_board_setup(void *blob, struct bd_info *bd)
-{
-	static const struct node_info nodes[] = {
-		{ "physmap-flash.0", MTD_DEV_TYPE_NOR, },  /* NOR flash */
-		{ "mxc_nand", MTD_DEV_TYPE_NAND, }, /* NAND flash */
-	};
-
-	if (env_get("fdt_noauto")) {
-		puts("   Skiping ft_board_setup (fdt_noauto defined)\n");
-		return 0;
-	}
-
-	fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
-
-	return 0;
-}
diff --git a/board/CarMediaLab/flea3/lowlevel_init.S b/board/CarMediaLab/flea3/lowlevel_init.S
deleted file mode 100644
index 8186b3922b..0000000000
--- a/board/CarMediaLab/flea3/lowlevel_init.S
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
- *
- * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * Copyright (C) 2011, Stefano Babic <sbabic@denx.de>
- */
-
-#include <config.h>
-#include <asm/arch/lowlevel_macro.S>
-
-.globl lowlevel_init
-lowlevel_init:
-
-	core_init
-
-	init_aips
-
-	init_max
-
-	init_m3if
-
-	mov pc, lr