video: Drop CONFIG_LCD_MENU

This relies on the old LCD implementation which is to be removed. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>

2 files changed, 0 insertions, 343 deletions

diff --git a/board/samsung/common/board.c b/board/samsung/common/board.c
index ff178b7fe6..04cfc5d635 100644
--- a/board/samsung/common/board.c
+++ b/board/samsung/common/board.c
@@ -262,10 +262,6 @@ int misc_init_r(void)
 #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 	set_board_info();
 #endif
-#ifdef CONFIG_LCD_MENU
-	keys_init();
-	check_boot_mode();
-#endif
 #ifdef CONFIG_CMD_BMP
 	if (panel_info.logo_on)
 		draw_logo();
diff --git a/board/samsung/common/misc.c b/board/samsung/common/misc.c
index b3b1bbcc82..ee6d2d2a0d 100644
--- a/board/samsung/common/misc.c
+++ b/board/samsung/common/misc.c
@@ -114,345 +114,6 @@ void set_board_info(void)
 }
 #endif /* CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG */
 
-#ifdef CONFIG_LCD_MENU
-static int power_key_pressed(u32 reg)
-{
-	struct udevice *dev;
-	int ret;
-	u32 status;
-	u32 mask;
-
-	if (IS_ENABLED(CONFIG_TARGET_TRATS))
-		ret = pmic_get("max8997-pmic", &dev);
-	else if (IS_ENABLED(CONFIG_TARGET_TRATS2))
-		ret = pmic_get("max77686-pmic", &dev);
-	else if (IS_ENABLED(CONFIG_TARGET_S5PC210_UNIVERSAL))
-		ret = pmic_get("max8998-pmic", &dev);
-	else
-		return 0;
-
-	if (ret)
-		return ret;
-
-	if (reg == KEY_PWR_STATUS_REG)
-		mask = KEY_PWR_STATUS_MASK;
-	else
-		mask = KEY_PWR_INTERRUPT_MASK;
-
-	status = pmic_reg_read(dev, reg);
-	if (status < 0)
-		return status;
-
-	return !!(status & mask);
-}
-
-static int key_pressed(int key)
-{
-	int value;
-
-	switch (key) {
-	case KEY_POWER:
-		value = power_key_pressed(KEY_PWR_INTERRUPT_REG);
-		break;
-	case KEY_VOLUMEUP:
-		value = !gpio_get_value(KEY_VOL_UP_GPIO);
-		break;
-	case KEY_VOLUMEDOWN:
-		value = !gpio_get_value(KEY_VOL_DOWN_GPIO);
-		break;
-	default:
-		value = 0;
-		break;
-	}
-
-	return value;
-}
-
-#ifdef CONFIG_LCD
-static int check_keys(void)
-{
-	int keys = 0;
-
-	if (key_pressed(KEY_POWER))
-		keys += KEY_POWER;
-	if (key_pressed(KEY_VOLUMEUP))
-		keys += KEY_VOLUMEUP;
-	if (key_pressed(KEY_VOLUMEDOWN))
-		keys += KEY_VOLUMEDOWN;
-
-	return keys;
-}
-
-/*
- * 0 BOOT_MODE_INFO
- * 1 BOOT_MODE_THOR
- * 2 BOOT_MODE_UMS
- * 3 BOOT_MODE_DFU
- * 4 BOOT_MODE_EXIT
- */
-static char *
-mode_name[BOOT_MODE_EXIT + 1][2] = {
-	{"DEVICE", ""},
-	{"THOR", "thor"},
-	{"UMS", "ums"},
-	{"DFU", "dfu"},
-	{"GPT", "gpt"},
-	{"ENV", "env"},
-	{"EXIT", ""},
-};
-
-static char *
-mode_info[BOOT_MODE_EXIT + 1] = {
-	"info",
-	"downloader",
-	"mass storage",
-	"firmware update",
-	"restore",
-	"default",
-	"and run normal boot"
-};
-
-static char *
-mode_cmd[BOOT_MODE_EXIT + 1] = {
-	"",
-	"thor 0 mmc 0",
-	"ums 0 mmc 0",
-	"dfu 0 mmc 0",
-	"gpt write mmc 0 $partitions",
-	"env default -a; saveenv",
-	"",
-};
-
-static void display_board_info(void)
-{
-#ifdef CONFIG_MMC
-	struct mmc *mmc = find_mmc_device(0);
-#endif
-	vidinfo_t *vid = &panel_info;
-
-	lcd_position_cursor(4, 4);
-
-	lcd_printf("%s\n\t", U_BOOT_VERSION);
-	lcd_puts("\n\t\tBoard Info:\n");
-#ifdef CONFIG_SYS_BOARD
-	lcd_printf("\tBoard name: %s\n", CONFIG_SYS_BOARD);
-#endif
-#ifdef CONFIG_REVISION_TAG
-	lcd_printf("\tBoard rev: %u\n", get_board_rev());
-#endif
-	lcd_printf("\tDRAM banks: %u\n", CONFIG_NR_DRAM_BANKS);
-	lcd_printf("\tDRAM size: %u MB\n", gd->ram_size / SZ_1M);
-
-#ifdef CONFIG_MMC
-	if (mmc) {
-		if (!mmc->capacity)
-			mmc_init(mmc);
-
-		lcd_printf("\teMMC size: %llu MB\n", mmc->capacity / SZ_1M);
-	}
-#endif
-	if (vid)
-		lcd_printf("\tDisplay resolution: %u x % u\n",
-			   vid->vl_col, vid->vl_row);
-
-	lcd_printf("\tDisplay BPP: %u\n", 1 << vid->vl_bpix);
-}
-#endif
-
-static int mode_leave_menu(int mode)
-{
-#ifdef CONFIG_LCD
-	char *exit_option;
-	char *exit_reset = "reset";
-	char *exit_back = "back";
-	struct cmd_tbl *cmd;
-	int cmd_result;
-	int leave;
-
-	lcd_clear();
-
-	switch (mode) {
-	case BOOT_MODE_EXIT:
-		return 1;
-	case BOOT_MODE_INFO:
-		display_board_info();
-		exit_option = exit_back;
-		leave = 0;
-		break;
-	default:
-		cmd = find_cmd(mode_name[mode][1]);
-		if (cmd) {
-			printf("Enter: %s %s\n", mode_name[mode][0],
-			       mode_info[mode]);
-			lcd_printf("\n\n\t%s %s\n", mode_name[mode][0],
-				   mode_info[mode]);
-			lcd_puts("\n\tDo not turn off device before finish!\n");
-
-			cmd_result = run_command(mode_cmd[mode], 0);
-
-			if (cmd_result == CMD_RET_SUCCESS) {
-				printf("Command finished\n");
-				lcd_clear();
-				lcd_printf("\n\n\t%s finished\n",
-					   mode_name[mode][0]);
-
-				exit_option = exit_reset;
-				leave = 1;
-			} else {
-				printf("Command error\n");
-				lcd_clear();
-				lcd_printf("\n\n\t%s command error\n",
-					   mode_name[mode][0]);
-
-				exit_option = exit_back;
-				leave = 0;
-			}
-		} else {
-			lcd_puts("\n\n\tThis mode is not supported.\n");
-			exit_option = exit_back;
-			leave = 0;
-		}
-	}
-
-	lcd_printf("\n\n\tPress POWER KEY to %s\n", exit_option);
-
-	/* Clear PWR button Rising edge interrupt status flag */
-	power_key_pressed(KEY_PWR_INTERRUPT_REG);
-
-	/* Wait for PWR key */
-	while (!key_pressed(KEY_POWER))
-		mdelay(1);
-
-	lcd_clear();
-	return leave;
-#else
-	return 0;
-#endif
-}
-
-#ifdef CONFIG_LCD
-static void display_download_menu(int mode)
-{
-	char *selection[BOOT_MODE_EXIT + 1];
-	int i;
-
-	for (i = 0; i <= BOOT_MODE_EXIT; i++)
-		selection[i] = "[  ]";
-
-	selection[mode] = "[=>]";
-
-	lcd_clear();
-	lcd_printf("\n\n\t\tDownload Mode Menu\n\n");
-
-	for (i = 0; i <= BOOT_MODE_EXIT; i++)
-		lcd_printf("\t%s  %s - %s\n\n", selection[i],
-			   mode_name[i][0], mode_info[i]);
-}
-#endif
-
-static void download_menu(void)
-{
-#ifdef CONFIG_LCD
-	int mode = 0;
-	int last_mode = 0;
-	int run;
-	int key = 0;
-	int timeout = 15; /* sec */
-	int i;
-
-	display_download_menu(mode);
-
-	lcd_puts("\n");
-
-	/* Start count if no key is pressed */
-	while (check_keys())
-		continue;
-
-	while (timeout--) {
-		lcd_printf("\r\tNormal boot will start in: %2.d seconds.",
-			   timeout);
-
-		/* about 1000 ms in for loop */
-		for (i = 0; i < 10; i++) {
-			mdelay(100);
-			key = check_keys();
-			if (key)
-				break;
-		}
-		if (key)
-			break;
-	}
-
-	if (!key) {
-		lcd_clear();
-		return;
-	}
-
-	while (1) {
-		run = 0;
-
-		if (mode != last_mode)
-			display_download_menu(mode);
-
-		last_mode = mode;
-		mdelay(200);
-
-		key = check_keys();
-		switch (key) {
-		case KEY_POWER:
-			run = 1;
-			break;
-		case KEY_VOLUMEUP:
-			if (mode > 0)
-				mode--;
-			break;
-		case KEY_VOLUMEDOWN:
-			if (mode < BOOT_MODE_EXIT)
-				mode++;
-			break;
-		default:
-			break;
-		}
-
-		if (run) {
-			if (mode_leave_menu(mode))
-				run_command("reset", 0);
-
-			display_download_menu(mode);
-		}
-	}
-
-	lcd_clear();
-#endif
-}
-
-void check_boot_mode(void)
-{
-	int pwr_key;
-
-	pwr_key = power_key_pressed(KEY_PWR_STATUS_REG);
-	if (!pwr_key)
-		return;
-
-	/* Clear PWR button Rising edge interrupt status flag */
-	power_key_pressed(KEY_PWR_INTERRUPT_REG);
-
-	if (key_pressed(KEY_VOLUMEUP))
-		download_menu();
-	else if (key_pressed(KEY_VOLUMEDOWN))
-		mode_leave_menu(BOOT_MODE_THOR);
-}
-
-void keys_init(void)
-{
-	/* Set direction to input */
-	gpio_request(KEY_VOL_UP_GPIO, "volume-up");
-	gpio_request(KEY_VOL_DOWN_GPIO, "volume-down");
-	gpio_direction_input(KEY_VOL_UP_GPIO);
-	gpio_direction_input(KEY_VOL_DOWN_GPIO);
-}
-#endif /* CONFIG_LCD_MENU */
-
 #ifdef CONFIG_CMD_BMP
 void draw_logo(void)
 {