diff options
author | Fabio Estevam <festevam@denx.de> | 2023-01-03 16:19:40 +0300 |
---|---|---|
committer | Stefano Babic <sbabic@denx.de> | 2023-01-31 10:36:52 +0300 |
commit | ab79811c9f0118314c13fefb8d8739ff8e4c7669 (patch) | |
tree | f2171c2d9cf850fdcb08b13f7a5076da4e36066a /board | |
parent | a7db74a4defe528050c396b53e0fad92bb910141 (diff) | |
download | u-boot-ab79811c9f0118314c13fefb8d8739ff8e4c7669.tar.xz |
pico-imx7d: Convert to DM_I2C and DM_PMIC
The conversion to DM_I2C is mandatory, so convert to it
and also to DM_PMIC.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Diffstat (limited to 'board')
-rw-r--r-- | board/technexion/pico-imx7d/pico-imx7d.c | 70 |
1 files changed, 18 insertions, 52 deletions
diff --git a/board/technexion/pico-imx7d/pico-imx7d.c b/board/technexion/pico-imx7d/pico-imx7d.c index 7db34abcb1..6e98b85b28 100644 --- a/board/technexion/pico-imx7d/pico-imx7d.c +++ b/board/technexion/pico-imx7d/pico-imx7d.c @@ -13,10 +13,8 @@ #include <asm/global_data.h> #include <asm/gpio.h> #include <asm/mach-imx/iomux-v3.h> -#include <asm/mach-imx/mxc_i2c.h> #include <asm/io.h> #include <common.h> -#include <i2c.h> #include <miiphy.h> #include <power/pmic.h> #include <power/pfuze3000_pmic.h> @@ -27,27 +25,6 @@ DECLARE_GLOBAL_DATA_PTR; #define UART_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | \ PAD_CTL_PUS_PU100KOHM | PAD_CTL_HYS) -#define I2C_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \ - PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU100KOHM) - -#ifdef CONFIG_SYS_I2C_MXC -#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) - -/* I2C4 for PMIC */ -static struct i2c_pads_info i2c_pad_info4 = { - .scl = { - .i2c_mode = MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL | PC, - .gpio_mode = MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 | PC, - .gp = IMX_GPIO_NR(6, 16), - }, - .sda = { - .i2c_mode = MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA | PC, - .gpio_mode = MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 | PC, - .gp = IMX_GPIO_NR(6, 17), - }, -}; -#endif - int dram_init(void) { gd->ram_size = imx_ddr_size(); @@ -60,50 +37,43 @@ int dram_init(void) return 0; } -#if CONFIG_IS_ENABLED(POWER_LEGACY) -#define I2C_PMIC 3 +#if CONFIG_IS_ENABLED(DM_PMIC) int power_init_board(void) { - struct pmic *p; + struct udevice *dev; + int reg, rev_id; int ret; - unsigned int reg, rev_id; - - ret = power_pfuze3000_init(I2C_PMIC); - if (ret) - return ret; - p = pmic_get("PFUZE3000"); - ret = pmic_probe(p); - if (ret) { - printf("Warning: Cannot find PMIC PFUZE3000\n"); - printf("\tPower consumption is not optimized.\n"); + ret = pmic_get("pfuze3000@8", &dev); + if (ret == -ENODEV) return 0; - } + if (ret != 0) + return ret; - pmic_reg_read(p, PFUZE3000_DEVICEID, ®); - pmic_reg_read(p, PFUZE3000_REVID, &rev_id); - printf("PMIC: PFUZE3000 DEV_ID=0x%x REV_ID=0x%x\n", reg, rev_id); + reg = pmic_reg_read(dev, PFUZE3000_DEVICEID); + rev_id = pmic_reg_read(dev, PFUZE3000_REVID); + printf("PMIC: PFUZE3000 DEV_ID=0x%x REV_ID=0x%x\n", reg, rev_id); /* disable Low Power Mode during standby mode */ - pmic_reg_read(p, PFUZE3000_LDOGCTL, ®); + reg = pmic_reg_read(dev, PFUZE3000_LDOGCTL); reg |= 0x1; - pmic_reg_write(p, PFUZE3000_LDOGCTL, reg); + pmic_reg_write(dev, PFUZE3000_LDOGCTL, reg); /* SW1A/1B mode set to APS/APS */ reg = 0x8; - pmic_reg_write(p, PFUZE3000_SW1AMODE, reg); - pmic_reg_write(p, PFUZE3000_SW1BMODE, reg); + pmic_reg_write(dev, PFUZE3000_SW1AMODE, reg); + pmic_reg_write(dev, PFUZE3000_SW1BMODE, reg); /* SW1A/1B standby voltage set to 1.025V */ reg = 0xd; - pmic_reg_write(p, PFUZE3000_SW1ASTBY, reg); - pmic_reg_write(p, PFUZE3000_SW1BSTBY, reg); + pmic_reg_write(dev, PFUZE3000_SW1ASTBY, reg); + pmic_reg_write(dev, PFUZE3000_SW1BSTBY, reg); /* decrease SW1B normal voltage to 0.975V */ - pmic_reg_read(p, PFUZE3000_SW1BVOLT, ®); + reg = pmic_reg_read(dev, PFUZE3000_SW1BVOLT); reg &= ~0x1f; reg |= PFUZE3000_SW1AB_SETP(975); - pmic_reg_write(p, PFUZE3000_SW1BVOLT, reg); + pmic_reg_write(dev, PFUZE3000_SW1BVOLT, reg); return 0; } @@ -168,10 +138,6 @@ int board_early_init_f(void) { setup_iomux_uart(); -#ifdef CONFIG_SYS_I2C_MXC - setup_i2c(3, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info4); -#endif - return 0; } |