Makefile: Build final mpc85xx non-SPL image in standard file u-boot.bin

Currently Makefile produces final mpc85xx image when SPL is not used in
custom file u-boot-with-dtb.bin. It is quite confusing name as build
process produce also intermediate file standard file u-boot-dtb.bin (which
is just intermediate and not bootable). Other platforms use u-boot.bin
(UBOOT_BIN) as standard name for final bootable raw image.

So change Makefile rules and binman to produce final bootable file for
mpc85xx also into file u-boot.bin. There is just need for mpc85xx to not
define default rule for u-boot.bin then instruct binman (via DTS file) to
store final image into u-boot.bin (instead of u-boot-with-dtb.bin) and
finally rename target u-boot-with-dtb.bin to u-boot.bin.

With this change are also removed custom Makefile hacks for mpc85xx that it
produced non-standard output file. And also updated documentation.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Marek Behún <kabel@kernel.org>

6 files changed, 5 insertions, 8 deletions

diff --git a/board/freescale/p1_p2_rdb_pc/README b/board/freescale/p1_p2_rdb_pc/README
index 86ff04e69d..f542decec7 100644
--- a/board/freescale/p1_p2_rdb_pc/README
+++ b/board/freescale/p1_p2_rdb_pc/README
@@ -60,5 +60,5 @@ enabled in relative defconfig file,
    CONFIG_RESET_VECTOR_ADDRESS - 0xffc
 
 If device tree support is enabled in defconfig,
-1. use 'u-boot-with-dtb.bin' for NOR boot.
+1. use 'u-boot.bin' for NOR boot.
 2. use 'u-boot-with-spl.bin' for other boot.
diff --git a/board/freescale/p2041rdb/README b/board/freescale/p2041rdb/README
index 79f77e4961..96612daeeb 100644
--- a/board/freescale/p2041rdb/README
+++ b/board/freescale/p2041rdb/README
@@ -100,9 +100,6 @@ enabled in relative defconfig file,
 3. CONFIG_MPC85XX_HAVE_RESET_VECTOR if reset vector is located at
    CONFIG_RESET_VECTOR_ADDRESS - 0xffc
 
-If device tree support is enabled in defconfig, use 'u-boot-with-dtb.bin'
-instead of u-boot.bin for all boot.
-
 CPLD command
 ============
 The CPLD is used to control the power sequence and some serdes lane
diff --git a/board/freescale/t102xrdb/README b/board/freescale/t102xrdb/README
index 84deb9562a..de170f52b4 100644
--- a/board/freescale/t102xrdb/README
+++ b/board/freescale/t102xrdb/README
@@ -267,7 +267,7 @@ enabled in relative defconfig file,
    config_reset_vector_address - 0xffc
 
 if device tree support is enabled in defconfig,
-1. use 'u-boot-with-dtb.bin' for nor boot.
+1. use 'u-boot.bin' for nor boot.
 2. use 'u-boot-with-spl-pbl.bin' for other boot.
 
 2-stage NAND/SPI/SD boot loader
diff --git a/board/freescale/t104xrdb/README b/board/freescale/t104xrdb/README
index 09cb98e33d..e90dca4166 100644
--- a/board/freescale/t104xrdb/README
+++ b/board/freescale/t104xrdb/README
@@ -382,5 +382,5 @@ enabled in relative defconfig file,
    CONFIG_RESET_VECTOR_ADDRESS - 0xffc
 
 If device tree support is enabled in defconfig,
-1. use 'u-boot-with-dtb.bin' for NOR boot.
+1. use 'u-boot.bin' for NOR boot.
 2. use 'u-boot-with-spl-pbl.bin' for other boot.
diff --git a/board/freescale/t208xqds/README b/board/freescale/t208xqds/README
index 75d317342f..63953d6b9b 100755
--- a/board/freescale/t208xqds/README
+++ b/board/freescale/t208xqds/README
@@ -288,5 +288,5 @@ enabled in relative defconfig file,
    CONFIG_RESET_VECTOR_ADDRESS - 0xffc
 
 If device tree support is enabled in defconfig,
-1. use 'u-boot-with-dtb.bin' for NOR boot.
+1. use 'u-boot.bin' for NOR boot.
 2. use 'u-boot-with-spl-pbl.bin' for other boot.
diff --git a/board/freescale/t208xrdb/README b/board/freescale/t208xrdb/README
index c4bfd3b466..60551f6723 100644
--- a/board/freescale/t208xrdb/README
+++ b/board/freescale/t208xrdb/README
@@ -284,5 +284,5 @@ enabled in relative defconfig file,
    CONFIG_RESET_VECTOR_ADDRESS - 0xffc
 
 If device tree support is enabled in defconfig,
-1. use 'u-boot-with-dtb.bin' for NOR boot.
+1. use 'u-boot.bin' for NOR boot.
 2. use 'u-boot-with-spl-pbl.bin' for other boot.