Merge branch 'master' of git://git.denx.de/u-boot into master

Signed-off-by: Stefano Babic <sbabic@denx.de>

6 files changed, 39 insertions, 4 deletions

diff --git a/board/davinci/da8xxevm/MAINTAINERS b/board/davinci/da8xxevm/MAINTAINERS
index 99b4786dd5..59589867b3 100644
--- a/board/davinci/da8xxevm/MAINTAINERS
+++ b/board/davinci/da8xxevm/MAINTAINERS
@@ -5,6 +5,7 @@ F:	board/davinci/da8xxevm/
 F:	include/configs/da850evm.h
 F:	configs/da850_am18xxevm_defconfig
 F:	configs/da850evm_defconfig
+F:	configs/da850evm_nand_defconfig
 F:	configs/da850evm_direct_nor_defconfig
 
 OMAPL138_LCDK BOARD
diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c
index 5583b45792..e8ec553f99 100644
--- a/board/davinci/da8xxevm/da850evm.c
+++ b/board/davinci/da8xxevm/da850evm.c
@@ -204,6 +204,7 @@ int misc_init_r(void)
 	return 0;
 }
 
+#ifndef CONFIG_DM_MMC
 #ifdef CONFIG_MMC_DAVINCI
 static struct davinci_mmc mmc_sd0 = {
 	.reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE,
@@ -220,6 +221,7 @@ int board_mmc_init(bd_t *bis)
 	return davinci_mmc_init(bis, &mmc_sd0);
 }
 #endif
+#endif
 
 static const struct pinmux_config gpio_pins[] = {
 #ifdef CONFIG_USE_NOR
diff --git a/board/davinci/da8xxevm/omapl138_lcdk.c b/board/davinci/da8xxevm/omapl138_lcdk.c
index 15ffc3bfac..2c2f885d43 100644
--- a/board/davinci/da8xxevm/omapl138_lcdk.c
+++ b/board/davinci/da8xxevm/omapl138_lcdk.c
@@ -353,6 +353,7 @@ int misc_init_r(void)
 	return 0;
 }
 
+#ifndef CONFIG_DM_MMC
 #ifdef CONFIG_MMC_DAVINCI
 static struct davinci_mmc mmc_sd0 = {
 	.reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE,
@@ -369,3 +370,4 @@ int board_mmc_init(bd_t *bis)
 	return davinci_mmc_init(bis, &mmc_sd0);
 }
 #endif
+#endif
diff --git a/board/logicpd/am3517evm/am3517evm.c b/board/logicpd/am3517evm/am3517evm.c
index da8be22085..6f728398c3 100644
--- a/board/logicpd/am3517evm/am3517evm.c
+++ b/board/logicpd/am3517evm/am3517evm.c
@@ -108,10 +108,11 @@ int misc_init_r(void)
 	volatile unsigned int ctr;
 	u32 reset;
 
+#if !defined(CONFIG_DM_I2C)
 #ifdef CONFIG_SYS_I2C_OMAP24XX
 	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
 #endif
-
+#endif
 	omap_die_id_display();
 
 	am3517_evm_musb_init();
diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c
index fbad89b696..620423bbc8 100644
--- a/board/logicpd/omap3som/omap3logic.c
+++ b/board/logicpd/omap3som/omap3logic.c
@@ -24,6 +24,7 @@
 #include <asm/arch/mem.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/gpio.h>
+#include <asm/omap_mmc.h>
 #include <asm/mach-types.h>
 #include <linux/mtd/rawnand.h>
 #include <asm/omap_musb.h>
@@ -39,6 +40,36 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+/* This is only needed until SPL gets OF support */
+#ifdef CONFIG_SPL_BUILD
+static const struct ns16550_platdata omap3logic_serial = {
+	.base = OMAP34XX_UART1,
+	.reg_shift = 2,
+	.clock = V_NS16550_CLK,
+	.fcr = UART_FCR_DEFVAL,
+};
+
+U_BOOT_DEVICE(omap3logic_uart) = {
+	"ns16550_serial",
+	&omap3logic_serial
+};
+
+static const struct omap_hsmmc_plat omap3_logic_mmc0_platdata = {
+	.base_addr = (struct hsmmc *)OMAP_HSMMC1_BASE,
+	.cfg.host_caps = MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_4BIT,
+	.cfg.f_min = 400000,
+	.cfg.f_max = 52000000,
+	.cfg.voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195,
+	.cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT,
+};
+
+U_BOOT_DEVICE(am335x_mmc0) = {
+	.name = "omap_hsmmc",
+	.platdata = &omap3_logic_mmc0_platdata,
+};
+
+#endif
+
 /*
  * two dimensional array of strucures containining board name and Linux
  * machine IDs; row it selected based on CPU column is slected based
diff --git a/board/renesas/ap325rxa/cpld-ap325rxa.c b/board/renesas/ap325rxa/cpld-ap325rxa.c
index 16fadcbca7..5d9dc9387e 100644
--- a/board/renesas/ap325rxa/cpld-ap325rxa.c
+++ b/board/renesas/ap325rxa/cpld-ap325rxa.c
@@ -61,8 +61,6 @@
 #define CPLD_DONE_ADR	((vu_char *)0xA4050132)
 #define CPLD_DONE_DAT	0x20
 
-#define	HIZCRB			((vu_short *)0xA405015A)
-
 /* data */
 #define CPLD_NOMAL_START	0xA0A80000
 #define CPLD_SAFE_START		0xA0AC0000
@@ -191,7 +189,7 @@ void init_cpld(void)
 	if (*CPLD_DONE_ADR & CPLD_DONE_DAT)	/* Already DONE */
 		return;
 
-	*HIZCRB = 0x0000;
+	*((vu_short *)HIZCRB) = 0x0000;
 	*CPLD_PFC_ADR = 0x7c00;			/* FPGA PROG = OUTPUT */
 
 	/* write CPLD data from NOR flash to device */