diff options
author | Tom Rini <trini@ti.com> | 2013-10-21 16:10:36 +0400 |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2013-10-21 16:10:36 +0400 |
commit | 748bde608a8dfea5b64e186af4d9c27642fe7813 (patch) | |
tree | 8564b610e812404bd320ddea458fc585d9c49d7e /board | |
parent | 9dff87a297dabe4af60012ad2d990ff8967f1d55 (diff) | |
parent | 449697f14ebc9f7cb5bf15bbad0d46c6ca2c4979 (diff) | |
download | u-boot-748bde608a8dfea5b64e186af4d9c27642fe7813.tar.xz |
Merge branch 'master' of git://git.denx.de/u-boot-usb
Diffstat (limited to 'board')
27 files changed, 199 insertions, 111 deletions
diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c index cc36f4587c..2b5f1a62cc 100644 --- a/board/amcc/canyonlands/canyonlands.c +++ b/board/amcc/canyonlands/canyonlands.c @@ -16,6 +16,7 @@ #include <asm/4xx_pcie.h> #include <asm/ppc4xx-gpio.h> #include <asm/errno.h> +#include <usb.h> extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ @@ -188,7 +189,7 @@ int board_early_init_f(void) } #if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT) -int usb_board_init(void) +int board_usb_init(int index, enum usb_init_type init) { struct board_bcsr *bcsr_data = (struct board_bcsr *)CONFIG_SYS_BCSR_BASE; @@ -229,7 +230,7 @@ int usb_board_stop(void) return 0; } -int usb_board_init_fail(void) +int board_usb_cleanup(int index, enum usb_init_type init) { return usb_board_stop(); } diff --git a/board/balloon3/balloon3.c b/board/balloon3/balloon3.c index ecbac16d59..04e0574658 100644 --- a/board/balloon3/balloon3.c +++ b/board/balloon3/balloon3.c @@ -13,6 +13,7 @@ #include <asm/io.h> #include <spartan3.h> #include <command.h> +#include <usb.h> DECLARE_GLOBAL_DATA_PTR; @@ -59,7 +60,7 @@ void dram_init_banksize(void) } #ifdef CONFIG_CMD_USB -int usb_board_init(void) +int board_usb_init(int index, enum usb_init_type init) { writel((readl(UHCHR) | UHCHR_PCPL | UHCHR_PSPL) & ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE), @@ -90,9 +91,9 @@ int usb_board_init(void) return 0; } -void usb_board_init_fail(void) +int board_usb_cleanup(int index, enum usb_init_type init) { - return; + return 0; } void usb_board_stop(void) diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 17129081b7..53cb8dffd0 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -30,6 +30,7 @@ #include <i2c.h> DECLARE_GLOBAL_DATA_PTR; +#define GP_USB_OTG_PWR IMX_GPIO_NR(3, 22) #define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ @@ -179,6 +180,14 @@ iomux_v3_cfg_t const enet_pads2[] = { MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), }; +static iomux_v3_cfg_t const misc_pads[] = { + MX6_PAD_GPIO_1__USB_OTG_ID | MUX_PAD_CTRL(WEAK_PULLUP), + MX6_PAD_KEY_COL4__USBOH3_USBOTG_OC | MUX_PAD_CTRL(WEAK_PULLUP), + MX6_PAD_EIM_D30__USBOH3_USBH1_OC | MUX_PAD_CTRL(WEAK_PULLUP), + /* OTG Power enable */ + MX6_PAD_EIM_D22__GPIO_3_22 | MUX_PAD_CTRL(OUTPUT_40OHM), +}; + /* wl1271 pads on nitrogen6x */ iomux_v3_cfg_t const wl12xx_pads[] = { (MX6_PAD_NANDF_CS1__GPIO_6_14 & ~MUX_PAD_CTRL_MASK) @@ -250,6 +259,15 @@ int board_ehci_hcd_init(int port) return 0; } + +int board_ehci_power(int port, int on) +{ + if (port) + return 0; + gpio_set_value(GP_USB_OTG_PWR, on); + return 0; +} + #endif #ifdef CONFIG_FSL_ESDHC @@ -369,6 +387,11 @@ int board_eth_init(bd_t *bis) free(bus); } #endif + +#ifdef CONFIG_MV_UDC + /* For otg ethernet*/ + usb_eth_initialize(bis); +#endif return 0; } @@ -685,6 +708,7 @@ int board_early_init_f(void) gpio_direction_input(WL12XX_WL_IRQ_GP); gpio_direction_output(WL12XX_WL_ENABLE_GP, 0); gpio_direction_output(WL12XX_BT_ENABLE_GP, 0); + gpio_direction_output(GP_USB_OTG_PWR, 0); /* OTG power off */ imx_iomux_v3_setup_multiple_pads(wl12xx_pads, ARRAY_SIZE(wl12xx_pads)); setup_buttons(); @@ -706,6 +730,15 @@ int overwrite_console(void) int board_init(void) { + struct iomuxc_base_regs *const iomuxc_regs + = (struct iomuxc_base_regs *)IOMUXC_BASE_ADDR; + + clrsetbits_le32(&iomuxc_regs->gpr[1], + IOMUXC_GPR1_OTG_ID_MASK, + IOMUXC_GPR1_OTG_ID_GPIO1); + + imx_iomux_v3_setup_multiple_pads(misc_pads, ARRAY_SIZE(misc_pads)); + /* address of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; diff --git a/board/compulab/cm_t35/cm_t35.c b/board/compulab/cm_t35/cm_t35.c index 3caa5be845..19945c105e 100644 --- a/board/compulab/cm_t35/cm_t35.c +++ b/board/compulab/cm_t35/cm_t35.c @@ -565,7 +565,8 @@ struct omap_usbhs_board_data usbhs_bdata = { }; #define SB_T35_USB_HUB_RESET_GPIO 167 -int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) +int ehci_hcd_init(int index, enum usb_init_type init, + struct ehci_hccr **hccr, struct ehci_hcor **hcor) { u8 val; int offset; @@ -591,7 +592,7 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, offset, 0xC0); udelay(1); - return omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor); + return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor); } int ehci_hcd_stop(void) diff --git a/board/esd/apc405/apc405.c b/board/esd/apc405/apc405.c index f13f088d55..5cc1d0d9d6 100644 --- a/board/esd/apc405/apc405.c +++ b/board/esd/apc405/apc405.c @@ -17,6 +17,7 @@ #include <mtd/cfi_flash.h> #include <asm/4xx_pci.h> #include <pci.h> +#include <usb.h> DECLARE_GLOBAL_DATA_PTR; @@ -428,7 +429,7 @@ void reset_phy(void) } #if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT) -int usb_board_init(void) +int board_usb_init(int index, enum usb_init_type init) { return 0; } @@ -453,9 +454,8 @@ int usb_board_stop(void) return 0; } -int usb_board_init_fail(void) +int board_usb_cleanup(int index, enum usb_init_type init) { - usb_board_stop(); - return 0; + return usb_board_stop(); } #endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT) */ diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c index 549b3b73ce..88fc5f77b6 100644 --- a/board/esd/pmc440/pmc440.c +++ b/board/esd/pmc440/pmc440.c @@ -27,6 +27,7 @@ #endif #include <serial.h> #include <asm/4xx_pci.h> +#include <usb.h> #include "fpga.h" #include "pmc440.h" @@ -821,7 +822,7 @@ int bootstrap_eeprom_read (unsigned dev_addr, unsigned offset, } #if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT) -int usb_board_init(void) +int board_usb_init(int index, enum usb_init_type init) { char *act = getenv("usbact"); int i; @@ -845,10 +846,9 @@ int usb_board_stop(void) return 0; } -int usb_board_init_fail(void) +int board_usb_cleanup(int index, enum usb_init_type init) { - usb_board_stop(); - return 0; + return usb_board_stop(); } #endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT) */ diff --git a/board/htkw/mcx/mcx.c b/board/htkw/mcx/mcx.c index 653d7ea71d..4330cf0ddb 100644 --- a/board/htkw/mcx/mcx.c +++ b/board/htkw/mcx/mcx.c @@ -40,9 +40,10 @@ static struct omap_usbhs_board_data usbhs_bdata = { .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, }; -int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) +int ehci_hcd_init(int index, enum usb_init_type init, + struct ehci_hccr **hccr, struct ehci_hcor **hcor) { - return omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor); + return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor); } int ehci_hcd_stop(int index) diff --git a/board/icpdas/lp8x4x/lp8x4x.c b/board/icpdas/lp8x4x/lp8x4x.c index 1b68ef332a..92dd4ff97a 100644 --- a/board/icpdas/lp8x4x/lp8x4x.c +++ b/board/icpdas/lp8x4x/lp8x4x.c @@ -15,6 +15,7 @@ #include <netdev.h> #include <serial.h> #include <asm/io.h> +#include <usb.h> DECLARE_GLOBAL_DATA_PTR; @@ -58,7 +59,7 @@ int board_mmc_init(bd_t *bis) #endif #ifdef CONFIG_CMD_USB -int usb_board_init(void) +int board_usb_init(int index, enum usb_init_type init) { writel((UHCHR | UHCHR_PCPL | UHCHR_PSPL) & ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE), @@ -89,9 +90,9 @@ int usb_board_init(void) return 0; } -void usb_board_init_fail(void) +int board_usb_cleanup(int index, enum usb_init_type init) { - return; + return 0; } void usb_board_stop(void) diff --git a/board/mpl/common/usb_uhci.c b/board/mpl/common/usb_uhci.c index ff7ce828c6..6bbb527dab 100644 --- a/board/mpl/common/usb_uhci.c +++ b/board/mpl/common/usb_uhci.c @@ -584,7 +584,7 @@ void handle_usb_interrupt(void) /* init uhci */ -int usb_lowlevel_init(int index, void **controller) +int usb_lowlevel_init(int index, enum usb_init_type init, void **controller) { unsigned char temp; int busdevfunc; diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c index 126e56e97a..1972527e7d 100644 --- a/board/nvidia/common/board.c +++ b/board/nvidia/common/board.c @@ -32,6 +32,7 @@ #ifdef CONFIG_USB_EHCI_TEGRA #include <asm/arch-tegra/usb.h> #include <asm/arch/usb.h> +#include <usb.h> #endif #ifdef CONFIG_TEGRA_MMC #include <asm/arch-tegra/tegra_mmc.h> @@ -153,8 +154,9 @@ int board_init(void) #ifdef CONFIG_USB_EHCI_TEGRA pin_mux_usb(); - board_usb_init(gd->fdt_blob); + usb_process_devicetree(gd->fdt_blob); #endif + #ifdef CONFIG_LCD tegra_lcd_check_next_stage(gd->fdt_blob, 0); #endif diff --git a/board/samsung/common/Makefile b/board/samsung/common/Makefile index 9e48a7b6e5..ad7564cddf 100644 --- a/board/samsung/common/Makefile +++ b/board/samsung/common/Makefile @@ -10,6 +10,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)libsamsung.o COBJS-$(CONFIG_SOFT_I2C_MULTI_BUS) += multi_i2c.o +COBJS-$(CONFIG_THOR_FUNCTION) += thor.o SRCS := $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/samsung/common/thor.c b/board/samsung/common/thor.c new file mode 100644 index 0000000000..1c7630df08 --- /dev/null +++ b/board/samsung/common/thor.c @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2013 Samsung Electronics + * Lukasz Majewski <l.majewski@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/usb/ch9.h> + +int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name) +{ + if (!strcmp(name, "usb_dnl_thor")) { + put_unaligned(CONFIG_G_DNL_THOR_VENDOR_NUM, &dev->idVendor); + put_unaligned(CONFIG_G_DNL_THOR_PRODUCT_NUM, &dev->idProduct); + } else { + put_unaligned(CONFIG_G_DNL_VENDOR_NUM, &dev->idVendor); + put_unaligned(CONFIG_G_DNL_PRODUCT_NUM, &dev->idProduct); + } + return 0; +} diff --git a/board/samsung/dts/exynos5250-smdk5250.dts b/board/samsung/dts/exynos5250-smdk5250.dts index b1bba9662e..c4ed3467cb 100644 --- a/board/samsung/dts/exynos5250-smdk5250.dts +++ b/board/samsung/dts/exynos5250-smdk5250.dts @@ -144,4 +144,8 @@ mmc@12230000 { status = "disabled"; }; + + ehci@12110000 { + samsung,vbus-gpio = <&gpio 0xbe 0>; /* X26 */ + }; }; diff --git a/board/samsung/dts/exynos5250-snow.dts b/board/samsung/dts/exynos5250-snow.dts index 12cd67e49c..091cdb9e86 100644 --- a/board/samsung/dts/exynos5250-snow.dts +++ b/board/samsung/dts/exynos5250-snow.dts @@ -109,6 +109,14 @@ status = "disabled"; }; + ehci@12110000 { + samsung,vbus-gpio = <&gpio 0xb1 0>; /* X11 */ + }; + + xhci@12000000 { + samsung,vbus-gpio = <&gpio 0xbf 0>; /* X27 */ + }; + tmu@10060000 { samsung,min-temp = <25>; samsung,max-temp = <125>; diff --git a/board/samsung/smdk5250/exynos5-dt.c b/board/samsung/smdk5250/exynos5-dt.c index bb4a82f449..6bcc883b10 100644 --- a/board/samsung/smdk5250/exynos5-dt.c +++ b/board/samsung/smdk5250/exynos5-dt.c @@ -61,22 +61,6 @@ struct local_info { static struct local_info local; -#ifdef CONFIG_USB_EHCI_EXYNOS -int board_usb_vbus_init(void) -{ - struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *) - samsung_get_base_gpio_part1(); - - /* Enable VBUS power switch */ - s5p_gpio_direction_output(&gpio1->x2, 6, 1); - - /* VBUS turn ON time */ - mdelay(3); - - return 0; -} -#endif - #ifdef CONFIG_SOUND_MAX98095 static void board_enable_audio_codec(void) { @@ -122,9 +106,6 @@ int board_init(void) if (board_init_cros_ec_devices(gd->fdt_blob)) return -1; -#ifdef CONFIG_USB_EHCI_EXYNOS - board_usb_vbus_init(); -#endif #ifdef CONFIG_SOUND_MAX98095 board_enable_audio_codec(); #endif diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c index 7f61d17abb..d31d511e39 100644 --- a/board/samsung/trats/trats.c +++ b/board/samsung/trats/trats.c @@ -26,6 +26,7 @@ #include <power/max8997_muic.h> #include <power/battery.h> #include <power/max17042_fg.h> +#include <usb.h> #include <usb_mass_storage.h> #include "setup.h" @@ -495,10 +496,10 @@ struct s3c_plat_otg_data s5pc210_otg_data = { .usb_flags = PHY0_SLEEP, }; -void board_usb_init(void) +int board_usb_init(int index, enum usb_init_type init) { debug("USB_udc_probe\n"); - s3c_udc_probe(&s5pc210_otg_data); + return s3c_udc_probe(&s5pc210_otg_data); } #endif diff --git a/board/siemens/common/factoryset.c b/board/siemens/common/factoryset.c index eda9141c54..fbe79973e3 100644 --- a/board/siemens/common/factoryset.c +++ b/board/siemens/common/factoryset.c @@ -275,7 +275,7 @@ int factoryset_setenv(void) return ret; } -int g_dnl_bind_fixup(struct usb_device_descriptor *dev) +int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name) { put_unaligned(factory_dat.usb_vendor_id, &dev->idVendor); put_unaligned(factory_dat.usb_product_id, &dev->idProduct); diff --git a/board/technexion/twister/twister.c b/board/technexion/twister/twister.c index cd91d8fea0..054e7ccded 100644 --- a/board/technexion/twister/twister.c +++ b/board/technexion/twister/twister.c @@ -51,9 +51,10 @@ static struct omap_usbhs_board_data usbhs_bdata = { .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, }; -int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) +int ehci_hcd_init(int index, enum usb_init_type init, + struct ehci_hccr **hccr, struct ehci_hcor **hcor) { - return omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor); + return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor); } int ehci_hcd_stop(int index) diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c index b4e01d1562..c32d554ea4 100644 --- a/board/teejet/mt_ventoux/mt_ventoux.c +++ b/board/teejet/mt_ventoux/mt_ventoux.c @@ -102,9 +102,10 @@ static struct omap_usbhs_board_data usbhs_bdata = { .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, }; -int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) +int ehci_hcd_init(int index, enum usb_init_type init, + struct ehci_hccr **hccr, struct ehci_hcor **hcor) { - return omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor); + return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor); } int ehci_hcd_stop(int index) diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index 62e9beaef3..9669a32fc1 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -521,9 +521,10 @@ static struct omap_usbhs_board_data usbhs_bdata = { .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED }; -int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) +int ehci_hcd_init(int index, enum usb_init_type init, + struct ehci_hccr **hccr, struct ehci_hcor **hcor) { - return omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor); + return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor); } int ehci_hcd_stop(int index) diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index 9a114e2a75..9657c75f23 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -17,12 +17,6 @@ #include "mux_data.h" -#ifdef CONFIG_USB_EHCI -#include <usb.h> -#include <asm/arch/ehci.h> -#include <asm/ehci-omap.h> -#endif - #ifdef CONFIG_DRIVER_TI_CPSW #include <cpsw.h> #endif diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h index 6965cc57d2..38de9d5a8b 100644 --- a/board/ti/dra7xx/mux_data.h +++ b/board/ti/dra7xx/mux_data.h @@ -61,5 +61,6 @@ const struct pad_conf_entry core_padconf_array_essential[] = { {GPMC_A4, (IEN | PDIS | M1)}, /* QSPI1_CS3 */ {GPMC_CS2, (IEN | PTU | PDIS | M1)}, /* QSPI1_CS0 */ {GPMC_CS3, (IEN | PTU | PDIS | M1)}, /* QSPI1_CS1*/ + {USB2_DRVVBUS, (M0 | IEN | FSC) }, }; #endif /* _MUX_DATA_DRA7XX_H_ */ diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c index 47063309e5..9458104604 100644 --- a/board/ti/omap5_uevm/evm.c +++ b/board/ti/omap5_uevm/evm.c @@ -14,7 +14,7 @@ #include "mux_data.h" -#ifdef CONFIG_USB_EHCI +#if defined(CONFIG_USB_EHCI) || defined(CONFIG_USB_XHCI_OMAP) #include <usb.h> #include <asm/gpio.h> #include <asm/arch/clock.h> @@ -72,6 +72,35 @@ int board_eth_init(bd_t *bis) return 0; } +#if defined(CONFIG_USB_EHCI) || defined(CONFIG_USB_XHCI_OMAP) +static void enable_host_clocks(void) +{ + int auxclk; + int hs_clk_ctrl_val = (OPTFCLKEN_HSIC60M_P3_CLK | + OPTFCLKEN_HSIC480M_P3_CLK | + OPTFCLKEN_HSIC60M_P2_CLK | + OPTFCLKEN_HSIC480M_P2_CLK | + OPTFCLKEN_UTMI_P3_CLK | OPTFCLKEN_UTMI_P2_CLK); + + /* Enable port 2 and 3 clocks*/ + setbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl, hs_clk_ctrl_val); + + /* Enable port 2 and 3 usb host ports tll clocks*/ + setbits_le32((*prcm)->cm_l3init_hsusbtll_clkctrl, + (OPTFCLKEN_USB_CH1_CLK_ENABLE | OPTFCLKEN_USB_CH2_CLK_ENABLE)); +#ifdef CONFIG_USB_XHCI_OMAP + /* Enable the USB OTG Super speed clocks */ + setbits_le32((*prcm)->cm_l3init_usb_otg_ss_clkctrl, + (OPTFCLKEN_REFCLK960M | OTG_SS_CLKCTRL_MODULEMODE_HW)); +#endif + + auxclk = readl((*prcm)->scrm_auxclk1); + /* Request auxilary clock */ + auxclk |= AUXCLK_ENABLE_MASK; + writel(auxclk, (*prcm)->scrm_auxclk1); +} +#endif + /** * @brief misc_init_r - Configure EVM board specific configurations * such as power configurations, ethernet initialization as phase2 of @@ -81,9 +110,30 @@ int board_eth_init(bd_t *bis) */ int misc_init_r(void) { + int reg; + uint8_t device_mac[6]; + #ifdef CONFIG_PALMAS_POWER palmas_init_settings(); #endif + + if (!getenv("usbethaddr")) { + reg = DIE_ID_REG_BASE + DIE_ID_REG_OFFSET; + + /* + * create a fake MAC address from the processor ID code. + * first byte is 0x02 to signify locally administered. + */ + device_mac[0] = 0x02; + device_mac[1] = readl(reg + 0x10) & 0xff; + device_mac[2] = readl(reg + 0xC) & 0xff; + device_mac[3] = readl(reg + 0x8) & 0xff; + device_mac[4] = readl(reg) & 0xff; + device_mac[5] = (readl(reg) >> 8) & 0xff; + + eth_setenv_enetaddr("usbethaddr", device_mac); + } + return 0; } @@ -129,54 +179,14 @@ static struct omap_usbhs_board_data usbhs_bdata = { .port_mode[2] = OMAP_EHCI_PORT_MODE_HSIC, }; -static void enable_host_clocks(void) -{ - int hs_clk_ctrl_val = (OPTFCLKEN_HSIC60M_P3_CLK | - OPTFCLKEN_HSIC480M_P3_CLK | - OPTFCLKEN_HSIC60M_P2_CLK | - OPTFCLKEN_HSIC480M_P2_CLK | - OPTFCLKEN_UTMI_P3_CLK | OPTFCLKEN_UTMI_P2_CLK); - - /* Enable port 2 and 3 clocks*/ - setbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl, hs_clk_ctrl_val); - - /* Enable port 2 and 3 usb host ports tll clocks*/ - setbits_le32((*prcm)->cm_l3init_hsusbtll_clkctrl, - (OPTFCLKEN_USB_CH1_CLK_ENABLE | OPTFCLKEN_USB_CH2_CLK_ENABLE)); -} - -int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) +int ehci_hcd_init(int index, enum usb_init_type init, + struct ehci_hccr **hccr, struct ehci_hcor **hcor) { int ret; - int auxclk; - int reg; - uint8_t device_mac[6]; enable_host_clocks(); - if (!getenv("usbethaddr")) { - reg = DIE_ID_REG_BASE + DIE_ID_REG_OFFSET; - - /* - * create a fake MAC address from the processor ID code. - * first byte is 0x02 to signify locally administered. - */ - device_mac[0] = 0x02; - device_mac[1] = readl(reg + 0x10) & 0xff; - device_mac[2] = readl(reg + 0xC) & 0xff; - device_mac[3] = readl(reg + 0x8) & 0xff; - device_mac[4] = readl(reg) & 0xff; - device_mac[5] = (readl(reg) >> 8) & 0xff; - - eth_setenv_enetaddr("usbethaddr", device_mac); - } - - auxclk = readl((*prcm)->scrm_auxclk1); - /* Request auxilary clock */ - auxclk |= AUXCLK_ENABLE_MASK; - writel(auxclk, (*prcm)->scrm_auxclk1); - - ret = omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor); + ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor); if (ret < 0) { puts("Failed to initialize ehci\n"); return ret; @@ -203,3 +213,23 @@ void usb_hub_reset_devices(int port) } } #endif + +#ifdef CONFIG_USB_XHCI_OMAP +/** + * @brief board_usb_init - Configure EVM board specific configurations + * for the LDO's and clocks for the USB blocks. + * + * @return 0 + */ +int board_usb_init(int index, enum board_usb_init_type init) +{ + int ret; +#ifdef CONFIG_PALMAS_USB_SS_PWR + ret = palmas_enable_ss_ldo(); +#endif + + enable_host_clocks(); + + return 0; +} +#endif diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c index bc3c29220e..c104024b10 100644 --- a/board/ti/panda/panda.c +++ b/board/ti/panda/panda.c @@ -269,7 +269,8 @@ static struct omap_usbhs_board_data usbhs_bdata = { .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, }; -int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) +int ehci_hcd_init(int index, enum usb_init_type init, + struct ehci_hccr **hccr, struct ehci_hcor **hcor) { int ret; unsigned int utmi_clk; @@ -279,7 +280,7 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) utmi_clk |= HSUSBHOST_CLKCTRL_CLKSEL_UTMI_P1_MASK; sr32((void *)CM_L3INIT_HSUSBHOST_CLKCTRL, 0, 32, utmi_clk); - ret = omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor); + ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor); if (ret < 0) return ret; diff --git a/board/toradex/colibri_pxa270/colibri_pxa270.c b/board/toradex/colibri_pxa270/colibri_pxa270.c index c1e2562348..8d95e4d174 100644 --- a/board/toradex/colibri_pxa270/colibri_pxa270.c +++ b/board/toradex/colibri_pxa270/colibri_pxa270.c @@ -13,6 +13,7 @@ #include <netdev.h> #include <asm/io.h> #include <serial.h> +#include <usb.h> DECLARE_GLOBAL_DATA_PTR; @@ -39,7 +40,7 @@ int dram_init(void) } #ifdef CONFIG_CMD_USB -int usb_board_init(void) +int board_usb_init(int index, enum usb_init_type init) { writel((readl(UHCHR) | UHCHR_PCPL | UHCHR_PSPL) & ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE), @@ -70,9 +71,9 @@ int usb_board_init(void) return 0; } -void usb_board_init_fail(void) +int board_usb_cleanup(int index, enum usb_init_type init) { - return; + return 0; } void usb_board_stop(void) diff --git a/board/trizepsiv/conxs.c b/board/trizepsiv/conxs.c index c0c318f328..1ddf05dcdd 100644 --- a/board/trizepsiv/conxs.c +++ b/board/trizepsiv/conxs.c @@ -21,6 +21,7 @@ #include <asm/arch/regs-mmc.h> #include <netdev.h> #include <asm/io.h> +#include <usb.h> DECLARE_GLOBAL_DATA_PTR; @@ -42,7 +43,7 @@ extern struct serial_device serial_stuart_device; * Miscelaneous platform dependent initialisations */ -int usb_board_init(void) +int board_usb_init(int index, enum usb_init_type init) { writel((readl(UHCHR) | UHCHR_PCPL | UHCHR_PSPL) & ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE), @@ -69,9 +70,9 @@ int usb_board_init(void) return 0; } -void usb_board_init_fail(void) +int board_usb_cleanup(int index, enum usb_init_type init) { - return; + return 0; } void usb_board_stop(void) diff --git a/board/vpac270/vpac270.c b/board/vpac270/vpac270.c index 616736f5c4..8d777df846 100644 --- a/board/vpac270/vpac270.c +++ b/board/vpac270/vpac270.c @@ -13,6 +13,7 @@ #include <netdev.h> #include <serial.h> #include <asm/io.h> +#include <usb.h> DECLARE_GLOBAL_DATA_PTR; @@ -66,7 +67,7 @@ int board_mmc_init(bd_t *bis) #endif #ifdef CONFIG_CMD_USB -int usb_board_init(void) +int board_usb_init(int index, enum usb_init_type init) { writel((UHCHR | UHCHR_PCPL | UHCHR_PSPL) & ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE), @@ -97,9 +98,9 @@ int usb_board_init(void) return 0; } -void usb_board_init_fail(void) +int board_usb_cleanup(int index, enum usb_init_type init) { - return; + return 0; } void usb_board_stop(void) |