arm: Remove nsa310s board

These boards have not been converted to CONFIG_DM_USB by the deadline
and is also missing conversion to CONFIG_DM.  Remove it

Cc: Gerald Kerma <dreagle@doukki.net>
Cc: Tony Dinh <mibodhi@gmail.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Signed-off-by: Tom Rini <trini@konsulko.com>

6 files changed, 0 insertions, 255 deletions

diff --git a/board/zyxel/nsa310s/Kconfig b/board/zyxel/nsa310s/Kconfig
deleted file mode 100644
index 801d6966ea..0000000000
--- a/board/zyxel/nsa310s/Kconfig
+++ /dev/null
@@ -1,18 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2015
-# Gerald Kerma <dreagle@doukki.net>
-# Tony Dinh <mibodhi@gmail.com>
-
-if TARGET_NSA310S
-
-config SYS_BOARD
-	default "nsa310s"
-
-config SYS_VENDOR
-	default "zyxel"
-
-config SYS_CONFIG_NAME
-	default "nsa310s"
-
-endif
diff --git a/board/zyxel/nsa310s/MAINTAINERS b/board/zyxel/nsa310s/MAINTAINERS
deleted file mode 100644
index d153758c21..0000000000
--- a/board/zyxel/nsa310s/MAINTAINERS
+++ /dev/null
@@ -1,8 +0,0 @@
-NSA310S BOARD
-M:	Gerald Kerma <dreagle@doukki.net>
-M:	Tony Dinh <mibodhi@gmail.com>
-M:	Luka Perkov <luka.perkov@sartura.hr>
-S:	Maintained
-F:	board/zyxel/nsa310s/
-F:	include/configs/nsa310s.h
-F:	configs/nsa310s_defconfig
diff --git a/board/zyxel/nsa310s/Makefile b/board/zyxel/nsa310s/Makefile
deleted file mode 100644
index 2131e28db3..0000000000
--- a/board/zyxel/nsa310s/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2015
-# Gerald Kerma <dreagle@doukki.net>
-# Tony Dinh <mibodhi@gmail.com>
-
-obj-y	:= nsa310s.o
diff --git a/board/zyxel/nsa310s/kwbimage.cfg b/board/zyxel/nsa310s/kwbimage.cfg
deleted file mode 100644
index 9ebdeab94d..0000000000
--- a/board/zyxel/nsa310s/kwbimage.cfg
+++ /dev/null
@@ -1,41 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2015
-# Gerald Kerma <dreagle@doukki.net>
-# Tony Dinh <mibodhi@gmail.com>
-# Refer to doc/README.kwbimage for more details about how-to
-# configure and create kirkwood boot images.
-#
-
-# Boot Media configurations
-BOOT_FROM       nand
-NAND_ECC_MODE   default
-NAND_PAGE_SIZE  0x0800
-
-# Configure RGMII-0 interface pad voltage to 1.8V
-DATA 0xFFD100e0 0x1b1b1b9b
-
-DATA 0xFFD01400 0x43010c30
-DATA 0xFFD01404 0x39543000
-DATA 0xFFD01408 0x22125451
-DATA 0xFFD0140C 0x00000833
-DATA 0xFFD01410 0x0000000C
-DATA 0xFFD01414 0x00000000
-DATA 0xFFD01418 0x00000000
-DATA 0xFFD0141C 0x00000652
-DATA 0xFFD01420 0x00000004
-DATA 0xFFD01424 0x0000F17F
-DATA 0xFFD01428 0x00085520
-DATA 0xFFD0147c 0x00008552
-DATA 0xFFD01504 0x0FFFFFF1
-DATA 0xFFD01508 0x10000000
-DATA 0xFFD0150C 0x00000000
-DATA 0xFFD01514 0x00000000
-DATA 0xFFD0151C 0x00000000
-DATA 0xFFD01494 0x00010000
-DATA 0xFFD01498 0x00000000
-DATA 0xFFD0149C 0x0000E403
-DATA 0xFFD01480 0x00000001
-DATA 0xFFD20134 0x66666666
-DATA 0xFFD20138 0x66666666
-DATA 0x0 0x0
diff --git a/board/zyxel/nsa310s/nsa310s.c b/board/zyxel/nsa310s/nsa310s.c
deleted file mode 100644
index cd4a7723b1..0000000000
--- a/board/zyxel/nsa310s/nsa310s.c
+++ /dev/null
@@ -1,135 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2015
- * Gerald Kerma <dreagle@doukki.net>
- * Tony Dinh <mibodhi@gmail.com>
- */
-
-#include <common.h>
-#include <init.h>
-#include <miiphy.h>
-#include <net.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/soc.h>
-#include <asm/arch/mpp.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include "nsa310s.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f(void)
-{
-	/*
-	 * default gpio configuration
-	 * There are maximum 64 gpios controlled through 2 sets of registers
-	 * the below configuration configures mainly initial LED status
-	 */
-	mvebu_config_gpio(NSA310S_VAL_LOW, NSA310S_VAL_HIGH,
-			  NSA310S_OE_LOW, NSA310S_OE_HIGH);
-
-	/* (all LEDs & power off active high) */
-	/* Multi-Purpose Pins Functionality configuration */
-	static const u32 kwmpp_config[] = {
-		MPP0_NF_IO2,
-		MPP1_NF_IO3,
-		MPP2_NF_IO4,
-		MPP3_NF_IO5,
-		MPP4_NF_IO6,
-		MPP5_NF_IO7,
-		MPP6_SYSRST_OUTn,
-		MPP7_GPO,
-		MPP8_TW_SDA,
-		MPP9_TW_SCK,
-		MPP10_UART0_TXD,
-		MPP11_UART0_RXD,
-		MPP12_GPO,
-		MPP13_GPIO,
-		MPP14_GPIO,
-		MPP15_GPIO,
-		MPP16_GPIO,
-		MPP17_GPIO,
-		MPP18_NF_IO0,
-		MPP19_NF_IO1,
-		MPP20_GPIO,
-		MPP21_GPIO,
-		MPP22_GPIO,
-		MPP23_GPIO,
-		MPP24_GPIO,
-		MPP25_GPIO,
-		MPP26_GPIO,
-		MPP27_GPIO,
-		MPP28_GPIO,
-		MPP29_GPIO,
-		MPP30_GPIO,
-		MPP31_GPIO,
-		MPP32_GPIO,
-		MPP33_GPIO,
-		MPP34_GPIO,
-		MPP35_GPIO,
-		0
-	};
-	kirkwood_mpp_conf(kwmpp_config, NULL);
-	return 0;
-}
-
-int board_init(void)
-{
-	/* address of boot parameters */
-	gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
-
-	return 0;
-}
-
-#ifdef CONFIG_RESET_PHY_R
-void reset_phy(void)
-{
-	u16 reg;
-	u16 phyaddr;
-	char *name = "egiga0";
-
-	if (miiphy_set_current_dev(name))
-		return;
-
-	/* read PHY dev address */
-	if (miiphy_read(name, 0xee, 0xee, (u16 *) &phyaddr)) {
-		printf("could not read PHY dev address\n");
-		return;
-	}
-
-	/* set RGMII delay */
-	miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, MV88E1318_MAC_CTRL_PG);
-	miiphy_read(name, phyaddr, MV88E1318_MAC_CTRL_REG, &reg);
-	reg |= (MV88E1318_RGMII_RX_CTRL | MV88E1318_RGMII_TX_CTRL);
-	miiphy_write(name, phyaddr, MV88E1318_MAC_CTRL_REG, reg);
-	miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, 0);
-
-	/* reset PHY */
-	if (miiphy_reset(name, phyaddr))
-		return;
-
-	/*
-	 * ZyXEL NSA310S uses the 88E1310S Alaska (interface identical to 88E1318)
-	 * and has an MCU attached to the LED[2] via tristate interrupt
-	 */
-
-	/* switch to LED register page */
-	miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, MV88E1318_LED_PG);
-	/* read out LED polarity register */
-	miiphy_read(name, phyaddr, MV88E1318_LED_POL_REG, &reg);
-	/* clear 4, set 5 - LED2 low, tri-state */
-	reg &= ~(MV88E1318_LED2_4);
-	reg |= (MV88E1318_LED2_5);
-	/* write back LED polarity register */
-	miiphy_write(name, phyaddr, MV88E1318_LED_POL_REG, reg);
-	/* jump back to page 0, per the PHY chip documenation. */
-	miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, 0);
-
-	/* set PHY back to auto-negotiation mode */
-	miiphy_write(name, phyaddr, 0x4, 0x1e1);
-	miiphy_write(name, phyaddr, 0x9, 0x300);
-	/* downshift */
-	miiphy_write(name, phyaddr, 0x10, 0x3860);
-	miiphy_write(name, phyaddr, 0x0, 0x9140);
-}
-#endif /* CONFIG_RESET_PHY_R */
diff --git a/board/zyxel/nsa310s/nsa310s.h b/board/zyxel/nsa310s/nsa310s.h
deleted file mode 100644
index d8bd9a586f..0000000000
--- a/board/zyxel/nsa310s/nsa310s.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2015
- * Gerald Kerma <dreagle@doukki.net>
- * Tony Dinh <mibodhi@gmail.com>
- */
-
-#ifndef __NSA310S_H
-#define __NSA310S_H
-
-/* low GPIO's */
-#define HDD1_GREEN_LED		(1 << 16)
-#define HDD1_RED_LED		(1 << 13)
-#define USB_GREEN_LED		(1 << 15)
-#define USB_POWER			(1 << 21)
-#define SYS_GREEN_LED		(1 << 28)
-#define SYS_ORANGE_LED		(1 << 29)
-
-#define COPY_GREEN_LED		(1 << 22)
-#define COPY_RED_LED		(1 << 23)
-
-#define PIN_USB_GREEN_LED	15
-#define PIN_USB_POWER		21
-
-#define NSA310S_OE_LOW		(~(0))
-#define NSA310S_VAL_LOW		(SYS_GREEN_LED | USB_POWER)
-
-/* high GPIO's */
-#define HDD2_GREEN_LED		(1 << 2)
-#define HDD2_POWER			(1 << 1)
-
-#define NSA310S_OE_HIGH		(~(0))
-#define NSA310S_VAL_HIGH	(HDD2_POWER)
-
-/* PHY related */
-#define MV88E1318_PGADR_REG		22
-#define MV88E1318_MAC_CTRL_PG	2
-#define MV88E1318_MAC_CTRL_REG	21
-#define MV88E1318_RGMII_TX_CTRL	(1 << 4)
-#define MV88E1318_RGMII_RX_CTRL	(1 << 5)
-#define MV88E1318_LED_PG		3
-#define MV88E1318_LED_POL_REG	17
-#define MV88E1318_LED2_4		(1 << 4)
-#define MV88E1318_LED2_5		(1 << 5)
-
-#endif /* __NSA310S_H */