diff options
author | Stefan Roese <sr@denx.de> | 2015-01-19 13:33:47 +0300 |
---|---|---|
committer | Luka Perkov <luka.perkov@sartura.hr> | 2015-02-06 19:24:43 +0300 |
commit | e7778ec153e279e451bf7c55c05c76e76b095875 (patch) | |
tree | 21d1e37f94d7c6a98a87d38333f86959f2ed20da /board | |
parent | 2f20aa82f470c0f6b5592914b9c4c3fd07bcb722 (diff) | |
download | u-boot-e7778ec153e279e451bf7c55c05c76e76b095875.tar.xz |
arm: maxbcm: Enable SPL to include DDR training code into U-Boot
This patch adds SPL support to the maxbcm MV78460 based board. Including
the fixed DDR configuratrion needed for the DDR training code. And the
the serdes PHY init code.
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
Diffstat (limited to 'board')
-rw-r--r-- | board/maxbcm/kwbimage.cfg | 2 | ||||
-rw-r--r-- | board/maxbcm/maxbcm.c | 83 |
2 files changed, 82 insertions, 3 deletions
diff --git a/board/maxbcm/kwbimage.cfg b/board/maxbcm/kwbimage.cfg index 5a3bc67c1c..cc05792556 100644 --- a/board/maxbcm/kwbimage.cfg +++ b/board/maxbcm/kwbimage.cfg @@ -9,4 +9,4 @@ VERSION 1 BOOT_FROM spi # Binary Header (bin_hdr) with DDR3 training code -BINARY board/maxbcm/binary.0 0000005b 00000068 +BINARY spl/u-boot-spl.bin 0000005b 00000068 diff --git a/board/maxbcm/maxbcm.c b/board/maxbcm/maxbcm.c index 7fc83ee820..a833cc3501 100644 --- a/board/maxbcm/maxbcm.c +++ b/board/maxbcm/maxbcm.c @@ -11,6 +11,9 @@ #include <asm/arch/soc.h> #include <linux/mbus.h> +#include "../drivers/ddr/mvebu/ddr3_hw_training.h" +#include "../arch/arm/mvebu-common/serdes/high_speed_env_spec.h" + DECLARE_GLOBAL_DATA_PTR; /* Base addresses for the external device chip selects */ @@ -19,8 +22,84 @@ DECLARE_GLOBAL_DATA_PTR; #define DEV_CS2_BASE 0xe2000000 #define DEV_CS3_BASE 0xe3000000 -/* Needed for dynamic (board-specific) mbus configuration */ -extern struct mvebu_mbus_state mbus_state; +/* DDR3 static configuration */ +MV_DRAM_MC_INIT ddr3_b0_maxbcm[MV_MAX_DDR3_STATIC_SIZE] = { + {0x00001400, 0x7301CC30}, /* DDR SDRAM Configuration Register */ + {0x00001404, 0x30000820}, /* Dunit Control Low Register */ + {0x00001408, 0x5515BAAB}, /* DDR SDRAM Timing (Low) Register */ + {0x0000140C, 0x38DA3F97}, /* DDR SDRAM Timing (High) Register */ + {0x00001410, 0x20100005}, /* DDR SDRAM Address Control Register */ + {0x00001414, 0x0000F3FF}, /* DDR SDRAM Open Pages Control Reg */ + {0x00001418, 0x00000e00}, /* DDR SDRAM Operation Register */ + {0x0000141C, 0x00000672}, /* DDR SDRAM Mode Register */ + {0x00001420, 0x00000004}, /* DDR SDRAM Extended Mode Register */ + {0x00001424, 0x0000F3FF}, /* Dunit Control High Register */ + {0x00001428, 0x0011A940}, /* Dunit Control High Register */ + {0x0000142C, 0x014C5134}, /* Dunit Control High Register */ + {0x0000147C, 0x0000D771}, + + {0x00001494, 0x00010000}, /* DDR SDRAM ODT Control (Low) Reg */ + {0x0000149C, 0x00000001}, /* DDR Dunit ODT Control Register */ + {0x000014A0, 0x00000001}, + {0x000014A8, 0x00000101}, + + /* Recommended Settings from Marvell for 4 x 16 bit devices: */ + {0x000014C0, 0x192424C9}, /* DRAM addr and Ctrl Driving Strenght*/ + {0x000014C4, 0xAAA24C9}, /* DRAM Data and DQS Driving Strenght */ + + /* + * DO NOT Modify - Open Mbus Window - 2G - Mbus is required for the + * training sequence + */ + {0x000200e8, 0x3FFF0E01}, + {0x00020184, 0x3FFFFFE0}, /* Close fast path Window to - 2G */ + + {0x0001504, 0x3FFFFFE1}, /* CS0 Size */ + {0x000150C, 0x00000000}, /* CS1 Size */ + {0x0001514, 0x00000000}, /* CS2 Size */ + {0x000151C, 0x00000000}, /* CS3 Size */ + + {0x0020220, 0x00000007}, /* Reserved */ + + {0x00001538, 0x0000000B}, /* Read Data Sample Delays Register */ + {0x0000153C, 0x0000000B}, /* Read Data Ready Delay Register */ + + {0x000015D0, 0x00000670}, /* MR0 */ + {0x000015D4, 0x00000044}, /* MR1 */ + {0x000015D8, 0x00000018}, /* MR2 */ + {0x000015DC, 0x00000000}, /* MR3 */ + {0x000015E0, 0x00000001}, + {0x000015E4, 0x00203c18}, /* ZQDS Configuration Register */ + {0x000015EC, 0xF800A225}, /* DDR PHY */ + + {0x0, 0x0} +}; + +MV_DRAM_MODES maxbcm_ddr_modes[MV_DDR3_MODES_NUMBER] = { + {"maxbcm_1600-800", 0xB, 0x5, 0x0, A0, ddr3_b0_maxbcm, NULL}, +}; + +extern MV_SERDES_CHANGE_M_PHY serdes_change_m_phy[]; + +/* MAXBCM: SERDES 0-4 PCIE, Serdes 7 = SGMII 0, all others = unconnected */ +MV_BIN_SERDES_CFG maxbcm_serdes_cfg[] = { + { MV_PEX_ROOT_COMPLEX, 0x20011111, 0x00000000, + { PEX_BUS_MODE_X1, PEX_BUS_MODE_X1, PEX_BUS_DISABLED, + PEX_BUS_DISABLED }, + 0x1f, serdes_change_m_phy + } +}; + +MV_DRAM_MODES *ddr3_get_static_ddr_mode(void) +{ + /* Only one mode supported for this board */ + return &maxbcm_ddr_modes[0]; +} + +MV_BIN_SERDES_CFG *board_serdes_cfg_get(u8 pex_mode) +{ + return &maxbcm_serdes_cfg[0]; +} int board_early_init_f(void) { |