diff options
author | Masahiro Yamada <yamada.masahiro@socionext.com> | 2017-04-14 04:54:59 +0300 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2017-04-18 17:29:13 +0300 |
commit | 4326b454744b47777f6575d62e84622d941da5ea (patch) | |
tree | fd8a2fbcf35f4bcf512531ebb929a5826a1a7aed /cmd | |
parent | 60911104f39b0fc3936a038d87e4a7c6dbe4fe33 (diff) | |
download | u-boot-4326b454744b47777f6575d62e84622d941da5ea.tar.xz |
cmd: remove Blackfin specific commands
These commands have no user since commit ea3310e8aafa ("Blackfin:
Remove").
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Diffstat (limited to 'cmd')
-rw-r--r-- | cmd/Makefile | 6 | ||||
-rw-r--r-- | cmd/bootldr.c | 170 | ||||
-rw-r--r-- | cmd/cplbinfo.c | 60 | ||||
-rw-r--r-- | cmd/ldrinfo.c | 192 | ||||
-rw-r--r-- | cmd/otp.c | 228 | ||||
-rw-r--r-- | cmd/softswitch.c | 41 | ||||
-rw-r--r-- | cmd/spibootldr.c | 37 |
7 files changed, 0 insertions, 734 deletions
diff --git a/cmd/Makefile b/cmd/Makefile index 3cb0cfde7b..97c862f651 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -23,7 +23,6 @@ obj-$(CONFIG_CMD_BLOCK_CACHE) += blkcache.o obj-$(CONFIG_CMD_BMP) += bmp.o obj-$(CONFIG_CMD_BOOTEFI) += bootefi.o obj-$(CONFIG_CMD_BOOTMENU) += bootmenu.o -obj-$(CONFIG_CMD_BOOTLDR) += bootldr.o obj-$(CONFIG_CMD_BOOTSTAGE) += bootstage.o obj-$(CONFIG_CMD_BOOTZ) += bootz.o obj-$(CONFIG_CMD_BOOTI) += booti.o @@ -32,7 +31,6 @@ obj-$(CONFIG_CMD_CBFS) += cbfs.o obj-$(CONFIG_CMD_CLK) += clk.o obj-$(CONFIG_CMD_CONFIG) += config.o obj-$(CONFIG_CMD_CONSOLE) += console.o -obj-$(CONFIG_CMD_CPLBINFO) += cplbinfo.o obj-$(CONFIG_CMD_CPU) += cpu.o obj-$(CONFIG_DATAFLASH_MMC_SELECT) += dataflash_mmc_mux.o obj-$(CONFIG_CMD_DATE) += date.o @@ -77,7 +75,6 @@ obj-$(CONFIG_CMD_IRQ) += irq.o obj-$(CONFIG_CMD_ITEST) += itest.o obj-$(CONFIG_CMD_JFFS2) += jffs2.o obj-$(CONFIG_CMD_CRAMFS) += cramfs.o -obj-$(CONFIG_CMD_LDRINFO) += ldrinfo.o obj-$(CONFIG_LED_STATUS_CMD) += legacy_led.o obj-$(CONFIG_CMD_LED) += led.o obj-$(CONFIG_CMD_LICENSE) += license.o @@ -100,7 +97,6 @@ obj-$(CONFIG_CMD_MTDPARTS) += mtdparts.o obj-$(CONFIG_CMD_NAND) += nand.o obj-$(CONFIG_CMD_NET) += net.o obj-$(CONFIG_CMD_ONENAND) += onenand.o -obj-$(CONFIG_CMD_OTP) += otp.o obj-$(CONFIG_CMD_PART) += part.o ifdef CONFIG_PCI obj-$(CONFIG_CMD_PCI) += pci.o @@ -119,9 +115,7 @@ obj-$(CONFIG_CMD_SF) += sf.o obj-$(CONFIG_SCSI) += scsi.o disk.o obj-$(CONFIG_CMD_SHA1SUM) += sha1sum.o obj-$(CONFIG_CMD_SETEXPR) += setexpr.o -obj-$(CONFIG_CMD_SOFTSWITCH) += softswitch.o obj-$(CONFIG_CMD_SPI) += spi.o -obj-$(CONFIG_CMD_SPIBOOTLDR) += spibootldr.o obj-$(CONFIG_CMD_STRINGS) += strings.o obj-$(CONFIG_CMD_TERMINAL) += terminal.o obj-$(CONFIG_CMD_TIME) += time.o diff --git a/cmd/bootldr.c b/cmd/bootldr.c deleted file mode 100644 index 38b3b2f8d7..0000000000 --- a/cmd/bootldr.c +++ /dev/null @@ -1,170 +0,0 @@ -/* - * U-Boot - bootldr.c - * - * Copyright (c) 2005-2008 Analog Devices Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * Licensed under the GPL-2 or later. - */ - -#include <config.h> -#include <common.h> -#include <command.h> - -#include <asm/blackfin.h> -#include <asm/mach-common/bits/bootrom.h> - -/* Simple sanity check on the specified address to make sure it contains - * an LDR image of some sort. - */ -static bool ldr_valid_signature(uint8_t *data) -{ -#if defined(__ADSPBF561__) - - /* BF56x has a 4 byte global header */ - if (data[3] == (GFLAG_56X_SIGN_MAGIC << (GFLAG_56X_SIGN_SHIFT - 24))) - return true; - -#elif defined(__ADSPBF531__) || defined(__ADSPBF532__) || defined(__ADSPBF533__) || \ - defined(__ADSPBF534__) || defined(__ADSPBF536__) || defined(__ADSPBF537__) || \ - defined(__ADSPBF538__) || defined(__ADSPBF539__) - - /* all the BF53x should start at this address mask */ - uint32_t addr; - memmove(&addr, data, sizeof(addr)); - if ((addr & 0xFF0FFF0F) == 0xFF000000) - return true; -#else - - /* everything newer has a magic byte */ - uint32_t count; - memmove(&count, data + 8, sizeof(count)); - if (data[3] == 0xAD && count == 0) - return true; - -#endif - - return false; -} - -/* If the Blackfin is new enough, the Blackfin on-chip ROM supports loading - * LDRs from random memory addresses. So whenever possible, use that. In - * the older cases (BF53x/BF561), parse the LDR format ourselves. - */ -static void ldr_load(uint8_t *base_addr) -{ -#if defined(__ADSPBF531__) || defined(__ADSPBF532__) || defined(__ADSPBF533__) || \ - /*defined(__ADSPBF534__) || defined(__ADSPBF536__) || defined(__ADSPBF537__) ||*/\ - defined(__ADSPBF538__) || defined(__ADSPBF539__) || defined(__ADSPBF561__) - - uint32_t addr; - uint32_t count; - uint16_t flags; - - /* the bf56x has a 4 byte global header ... but it is useless to - * us when booting an LDR from a memory address, so skip it - */ -# ifdef __ADSPBF561__ - base_addr += 4; -# endif - - memmove(&flags, base_addr + 8, sizeof(flags)); - bfin_write_EVT1(flags & BFLAG_53X_RESVECT ? 0xFFA00000 : 0xFFA08000); - - do { - /* block header may not be aligned */ - memmove(&addr, base_addr, sizeof(addr)); - memmove(&count, base_addr+4, sizeof(count)); - memmove(&flags, base_addr+8, sizeof(flags)); - base_addr += sizeof(addr) + sizeof(count) + sizeof(flags); - - printf("loading to 0x%08x (%#x bytes) flags: 0x%04x\n", - addr, count, flags); - - if (!(flags & BFLAG_53X_IGNORE)) { - if (flags & BFLAG_53X_ZEROFILL) - memset((void *)addr, 0x00, count); - else - memcpy((void *)addr, base_addr, count); - - if (flags & BFLAG_53X_INIT) { - void (*init)(void) = (void *)addr; - init(); - } - } - - if (!(flags & BFLAG_53X_ZEROFILL)) - base_addr += count; - } while (!(flags & BFLAG_53X_FINAL)); - -#endif -} - -/* For BF537, we use the _BOOTROM_BOOT_DXE_FLASH funky ROM function. - * For all other BF53x/BF56x, we just call the entry point. - * For everything else (newer), we use _BOOTROM_MEMBOOT ROM function. - */ -static void ldr_exec(void *addr) -{ -#if defined(__ADSPBF534__) || defined(__ADSPBF536__) || defined(__ADSPBF537__) - - /* restore EVT1 to reset value as this is what the bootrom uses as - * the default entry point when booting the final block of LDRs - */ - bfin_write_EVT1(L1_INST_SRAM); - __asm__("call (%0);" : : "a"(_BOOTROM_MEMBOOT), "q7"(addr) : "RETS", "memory"); - -#elif defined(__ADSPBF531__) || defined(__ADSPBF532__) || defined(__ADSPBF533__) || \ - defined(__ADSPBF538__) || defined(__ADSPBF539__) || defined(__ADSPBF561__) - - void (*ldr_entry)(void) = (void *)bfin_read_EVT1(); - ldr_entry(); - -#else - - int32_t (*BOOTROM_MEM)(void *, int32_t, int32_t, void *) = (void *)_BOOTROM_MEMBOOT; - BOOTROM_MEM(addr, 0, 0, NULL); - -#endif -} - -/* - * the bootldr command loads an address, checks to see if there - * is a Boot stream that the on-chip BOOTROM can understand, - * and loads it via the BOOTROM Callback. It is possible - * to also add booting from SPI, or TWI, but this function does - * not currently support that. - */ -int do_bootldr(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - void *addr; - - /* Get the address */ - if (argc < 2) - addr = (void *)load_addr; - else - addr = (void *)simple_strtoul(argv[1], NULL, 16); - - /* Check if it is a LDR file */ - if (ldr_valid_signature(addr)) { - printf("## Booting ldr image at 0x%p ...\n", addr); - ldr_load(addr); - - icache_disable(); - dcache_disable(); - - ldr_exec(addr); - } else - printf("## No ldr image at address 0x%p\n", addr); - - return 0; -} - -U_BOOT_CMD( - bootldr, 2, 0, do_bootldr, - "boot ldr image from memory", - "[addr]\n" - "" -); diff --git a/cmd/cplbinfo.c b/cmd/cplbinfo.c deleted file mode 100644 index ab5b3b5876..0000000000 --- a/cmd/cplbinfo.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * cmd_cplbinfo.c - dump the instruction/data cplb tables - * - * Copyright (c) 2007-2008 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include <common.h> -#include <command.h> -#include <asm/blackfin.h> -#include <asm/cplb.h> -#include <asm/mach-common/bits/mpu.h> - -/* - * Translate the PAGE_SIZE bits into a human string - */ -static const char *cplb_page_size(uint32_t data) -{ - static const char page_size_string_table[][4] = { "1K", "4K", "1M", "4M" }; - return page_size_string_table[(data & PAGE_SIZE_MASK) >> PAGE_SIZE_SHIFT]; -} - -/* - * show a hardware cplb table - */ -static void show_cplb_table(uint32_t *addr, uint32_t *data) -{ - int i; - printf(" Address Data Size Valid Locked\n"); - for (i = 1; i <= 16; ++i) { - printf(" %2i 0x%p 0x%05X %s %c %c\n", - i, (void *)*addr, *data, - cplb_page_size(*data), - (*data & CPLB_VALID ? 'Y' : 'N'), - (*data & CPLB_LOCK ? 'Y' : 'N')); - ++addr; - ++data; - } -} - -/* - * display current instruction and data cplb tables - */ -int do_cplbinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - printf("%s CPLB table [%08x]:\n", "Instruction", *(uint32_t *)DMEM_CONTROL); - show_cplb_table((uint32_t *)ICPLB_ADDR0, (uint32_t *)ICPLB_DATA0); - - printf("%s CPLB table [%08x]:\n", "Data", *(uint32_t *)IMEM_CONTROL); - show_cplb_table((uint32_t *)DCPLB_ADDR0, (uint32_t *)DCPLB_DATA0); - - return 0; -} - -U_BOOT_CMD( - cplbinfo, 1, 0, do_cplbinfo, - "display current CPLB tables", - "" -); diff --git a/cmd/ldrinfo.c b/cmd/ldrinfo.c deleted file mode 100644 index 2b49297327..0000000000 --- a/cmd/ldrinfo.c +++ /dev/null @@ -1,192 +0,0 @@ -/* - * U-Boot - ldrinfo - * - * Copyright (c) 2010 Analog Devices Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * Licensed under the GPL-2 or later. - */ - -#include <config.h> -#include <common.h> -#include <command.h> - -#include <asm/blackfin.h> -#include <asm/mach-common/bits/bootrom.h> - -static uint32_t ldrinfo_header(const void *addr) -{ - uint32_t skip = 0; - -#if defined(__ADSPBF561__) - /* BF56x has a 4 byte global header */ - uint32_t header, sign; - static const char * const spi_speed[] = { - "500K", "1M", "2M", "??", - }; - - memcpy(&header, addr, sizeof(header)); - - sign = (header & GFLAG_56X_SIGN_MASK) >> GFLAG_56X_SIGN_SHIFT; - printf("Header: %08X ( %s-bit-flash wait:%i hold:%i spi:%s %s)\n", - header, - (header & GFLAG_56X_16BIT_FLASH) ? "16" : "8", - (header & GFLAG_56X_WAIT_MASK) >> GFLAG_56X_WAIT_SHIFT, - (header & GFLAG_56X_HOLD_MASK) >> GFLAG_56X_HOLD_SHIFT, - spi_speed[(header & GFLAG_56X_SPI_MASK) >> GFLAG_56X_SPI_SHIFT], - sign == GFLAG_56X_SIGN_MAGIC ? "" : "!!hdrsign!! "); - - skip = 4; -#endif - - /* |Block @ 12345678: 12345678 12345678 12345678 12345678 | */ -#if defined(__ADSPBF531__) || defined(__ADSPBF532__) || defined(__ADSPBF533__) || \ - defined(__ADSPBF534__) || defined(__ADSPBF536__) || defined(__ADSPBF537__) || \ - defined(__ADSPBF538__) || defined(__ADSPBF539__) || defined(__ADSPBF561__) - printf(" Address Count Flags\n"); -#else - printf(" BCode Address Count Argument\n"); -#endif - - return skip; -} - -struct ldr_flag { - uint16_t flag; - const char *desc; -}; - -static uint32_t ldrinfo_block(const void *base_addr) -{ - uint32_t count; - - printf("Block @ %08X: ", (uint32_t)base_addr); - -#if defined(__ADSPBF531__) || defined(__ADSPBF532__) || defined(__ADSPBF533__) || \ - defined(__ADSPBF534__) || defined(__ADSPBF536__) || defined(__ADSPBF537__) || \ - defined(__ADSPBF538__) || defined(__ADSPBF539__) || defined(__ADSPBF561__) - - uint32_t addr, pval; - uint16_t flags; - int i; - static const struct ldr_flag ldr_flags[] = { - { BFLAG_53X_ZEROFILL, "zerofill" }, - { BFLAG_53X_RESVECT, "resvect" }, - { BFLAG_53X_INIT, "init" }, - { BFLAG_53X_IGNORE, "ignore" }, - { BFLAG_53X_COMPRESSED, "compressed"}, - { BFLAG_53X_FINAL, "final" }, - }; - - memcpy(&addr, base_addr, sizeof(addr)); - memcpy(&count, base_addr+4, sizeof(count)); - memcpy(&flags, base_addr+8, sizeof(flags)); - - printf("%08X %08X %04X ( ", addr, count, flags); - - for (i = 0; i < ARRAY_SIZE(ldr_flags); ++i) - if (flags & ldr_flags[i].flag) - printf("%s ", ldr_flags[i].desc); - - pval = (flags & BFLAG_53X_PFLAG_MASK) >> BFLAG_53X_PFLAG_SHIFT; - if (pval) - printf("gpio%i ", pval); - pval = (flags & BFLAG_53X_PPORT_MASK) >> BFLAG_53X_PPORT_SHIFT; - if (pval) - printf("port%c ", 'e' + pval); - - if (flags & BFLAG_53X_ZEROFILL) - count = 0; - if (flags & BFLAG_53X_FINAL) - count = 0; - else - count += sizeof(addr) + sizeof(count) + sizeof(flags); - -#else - - const uint8_t *raw8 = base_addr; - uint32_t bcode, addr, arg, sign, chk; - int i; - static const struct ldr_flag ldr_flags[] = { - { BFLAG_SAFE, "safe" }, - { BFLAG_AUX, "aux" }, - { BFLAG_FILL, "fill" }, - { BFLAG_QUICKBOOT, "quickboot" }, - { BFLAG_CALLBACK, "callback" }, - { BFLAG_INIT, "init" }, - { BFLAG_IGNORE, "ignore" }, - { BFLAG_INDIRECT, "indirect" }, - { BFLAG_FIRST, "first" }, - { BFLAG_FINAL, "final" }, - }; - - memcpy(&bcode, base_addr, sizeof(bcode)); - memcpy(&addr, base_addr+4, sizeof(addr)); - memcpy(&count, base_addr+8, sizeof(count)); - memcpy(&arg, base_addr+12, sizeof(arg)); - - printf("%08X %08X %08X %08X ( ", bcode, addr, count, arg); - - if (addr % 4) - printf("!!addralgn!! "); - if (count % 4) - printf("!!cntalgn!! "); - - sign = (bcode & BFLAG_HDRSIGN_MASK) >> BFLAG_HDRSIGN_SHIFT; - if (sign != BFLAG_HDRSIGN_MAGIC) - printf("!!hdrsign!! "); - - chk = 0; - for (i = 0; i < 16; ++i) - chk ^= raw8[i]; - if (chk) - printf("!!hdrchk!! "); - - printf("dma:%i ", bcode & BFLAG_DMACODE_MASK); - - for (i = 0; i < ARRAY_SIZE(ldr_flags); ++i) - if (bcode & ldr_flags[i].flag) - printf("%s ", ldr_flags[i].desc); - - if (bcode & BFLAG_FILL) - count = 0; - if (bcode & BFLAG_FINAL) - count = 0; - else - count += sizeof(bcode) + sizeof(addr) + sizeof(count) + sizeof(arg); - -#endif - - printf(")\n"); - - return count; -} - -static int do_ldrinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - const void *addr; - uint32_t skip; - - /* Get the address */ - if (argc < 2) - addr = (void *)load_addr; - else - addr = (void *)simple_strtoul(argv[1], NULL, 16); - - /* Walk the LDR */ - addr += ldrinfo_header(addr); - do { - skip = ldrinfo_block(addr); - addr += skip; - } while (skip); - - return 0; -} - -U_BOOT_CMD( - ldrinfo, 2, 0, do_ldrinfo, - "validate ldr image in memory", - "[addr]\n" -); diff --git a/cmd/otp.c b/cmd/otp.c deleted file mode 100644 index 10c1475c5a..0000000000 --- a/cmd/otp.c +++ /dev/null @@ -1,228 +0,0 @@ -/* - * cmd_otp.c - interface to Blackfin on-chip One-Time-Programmable memory - * - * Copyright (c) 2007-2008 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -/* There are 512 128-bit "pages" (0x000 through 0x1FF). - * The pages are accessable as 64-bit "halfpages" (an upper and lower half). - * The pages are not part of the memory map. There is an OTP controller which - * handles scanning in/out of bits. While access is done through OTP MMRs, - * the bootrom provides C-callable helper functions to handle the interaction. - */ - -#include <config.h> -#include <common.h> -#include <command.h> -#include <console.h> - -#include <asm/blackfin.h> -#include <asm/clock.h> -#include <asm/mach-common/bits/otp.h> - -static const char *otp_strerror(uint32_t err) -{ - switch (err) { - case 0: return "no error"; - case OTP_WRITE_ERROR: return "OTP fuse write error"; - case OTP_READ_ERROR: return "OTP fuse read error"; - case OTP_ACC_VIO_ERROR: return "invalid OTP address"; - case OTP_DATA_MULT_ERROR: return "multiple bad bits detected"; - case OTP_ECC_MULT_ERROR: return "error in ECC bits"; - case OTP_PREV_WR_ERROR: return "space already written"; - case OTP_DATA_SB_WARN: return "single bad bit in half page"; - case OTP_ECC_SB_WARN: return "single bad bit in ECC"; - default: return "unknown error"; - } -} - -#define lowup(x) ((x) % 2 ? "upper" : "lower") - -static int check_voltage(void) -{ - /* Make sure voltage limits are within datasheet spec */ - uint16_t vr_ctl = bfin_read_VR_CTL(); - -#ifdef __ADSPBF54x__ - /* 0.9V <= VDDINT <= 1.1V */ - if ((vr_ctl & 0xc) && (vr_ctl & 0xc0) == 0xc0) - return 1; -#else - /* for the parts w/out qualification yet */ - (void)vr_ctl; -#endif - - return 0; -} - -static void set_otp_timing(bool write) -{ - static uint32_t timing; - if (!timing) { - uint32_t tp1, tp2, tp3; - /* OTP_TP1 = 1000 / sclk_period (in nanoseconds) - * OTP_TP1 = 1000 / (1 / get_sclk() * 10^9) - * OTP_TP1 = (1000 * get_sclk()) / 10^9 - * OTP_TP1 = get_sclk() / 10^6 - */ - tp1 = get_sclk() / 1000000; - /* OTP_TP2 = 400 / (2 * sclk_period) - * OTP_TP2 = 400 / (2 * 1 / get_sclk() * 10^9) - * OTP_TP2 = (400 * get_sclk()) / (2 * 10^9) - * OTP_TP2 = (2 * get_sclk()) / 10^7 - */ - tp2 = (2 * get_sclk() / 10000000) << 8; - /* OTP_TP3 = magic constant */ - tp3 = (0x1401) << 15; - timing = tp1 | tp2 | tp3; - } - - bfrom_OtpCommand(OTP_INIT, write ? timing : timing & ~(-1 << 15)); -} - -int do_otp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - char *cmd; - uint32_t ret, base_flags; - bool prompt_user, force_read; - uint32_t (*otp_func)(uint32_t page, uint32_t flags, uint64_t *page_content); - - if (argc < 4) { - usage: - return CMD_RET_USAGE; - } - - prompt_user = false; - base_flags = 0; - cmd = argv[1]; - if (!strcmp(cmd, "read")) - otp_func = bfrom_OtpRead; - else if (!strcmp(cmd, "dump")) { - otp_func = bfrom_OtpRead; - force_read = true; - } else if (!strcmp(cmd, "write")) { - otp_func = bfrom_OtpWrite; - base_flags = OTP_CHECK_FOR_PREV_WRITE; - if (!strcmp(argv[2], "--force")) { - argv++; - --argc; - } else - prompt_user = false; - } else if (!strcmp(cmd, "lock")) { - if (argc != 4) - goto usage; - otp_func = bfrom_OtpWrite; - base_flags = OTP_LOCK; - } else - goto usage; - - uint64_t *addr = (uint64_t *)simple_strtoul(argv[2], NULL, 16); - uint32_t page = simple_strtoul(argv[3], NULL, 16); - uint32_t flags; - size_t i, count; - ulong half; - - if (argc > 4) - count = simple_strtoul(argv[4], NULL, 16); - else - count = 2; - - if (argc > 5) { - half = simple_strtoul(argv[5], NULL, 16); - if (half != 0 && half != 1) { - puts("Error: 'half' can only be '0' or '1'\n"); - goto usage; - } - } else - half = 0; - - /* "otp lock" has slightly different semantics */ - if (base_flags & OTP_LOCK) { - count = page; - page = (uint32_t)addr; - addr = NULL; - } - - /* do to the nature of OTP, make sure users are sure */ - if (prompt_user) { - printf( - "Writing one time programmable memory\n" - "Make sure your operating voltages and temperature are within spec\n" - " source address: 0x%p\n" - " OTP destination: %s page 0x%03X - %s page 0x%03lX\n" - " number to write: %lu halfpages\n" - " type \"YES\" (no quotes) to confirm: ", - addr, - lowup(half), page, - lowup(half + count - 1), page + (half + count - 1) / 2, - half + count - ); - if (!confirm_yesno()) { - printf(" Aborting\n"); - return 1; - } - } - - printf("OTP memory %s: addr 0x%p page 0x%03X count %zu ... ", - cmd, addr, page, count); - - set_otp_timing(otp_func == bfrom_OtpWrite); - if (otp_func == bfrom_OtpWrite && check_voltage()) { - puts("ERROR: VDDINT voltage is out of spec for writing\n"); - return -1; - } - - /* Do the actual reading/writing stuff */ - ret = 0; - for (i = half; i < count + half; ++i) { - flags = base_flags | (i % 2 ? OTP_UPPER_HALF : OTP_LOWER_HALF); - try_again: - ret = otp_func(page, flags, addr); - if (ret & OTP_MASTER_ERROR) { - if (force_read) { - if (flags & OTP_NO_ECC) - break; - else - flags |= OTP_NO_ECC; - puts("E"); - goto try_again; - } else - break; - } else if (ret) - puts("W"); - else - puts("."); - if (!(base_flags & OTP_LOCK)) { - ++addr; - if (i % 2) - ++page; - } else - ++page; - } - if (ret & 0x1) - printf("\nERROR at page 0x%03X (%s-halfpage): 0x%03X: %s\n", - page, lowup(i), ret, otp_strerror(ret)); - else - puts(" done\n"); - - /* Make sure we disable writing */ - set_otp_timing(false); - bfrom_OtpCommand(OTP_CLOSE, 0); - - return ret; -} - -U_BOOT_CMD( - otp, 7, 0, do_otp, - "One-Time-Programmable sub-system", - "read <addr> <page> [count] [half]\n" - " - read 'count' half-pages starting at 'page' (offset 'half') to 'addr'\n" - "otp dump <addr> <page> [count] [half]\n" - " - like 'otp read', but skip read errors\n" - "otp write [--force] <addr> <page> [count] [half]\n" - " - write 'count' half-pages starting at 'page' (offset 'half') from 'addr'\n" - "otp lock <page> <count>\n" - " - lock 'count' pages starting at 'page'" -); diff --git a/cmd/softswitch.c b/cmd/softswitch.c deleted file mode 100644 index f75d926770..0000000000 --- a/cmd/softswitch.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * cmd_softswitch.c - set the softswitch for bf60x - * - * Copyright (c) 2012 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include <common.h> -#include <command.h> -#include <asm/blackfin.h> -#include <asm/soft_switch.h> - -int do_softswitch(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - int switchaddr, value, pin, port; - - if (argc != 5) - return CMD_RET_USAGE; - - if (strcmp(argv[2], "GPA") == 0) - port = IO_PORT_A; - else if (strcmp(argv[2], "GPB") == 0) - port = IO_PORT_B; - else - return CMD_RET_USAGE; - - switchaddr = simple_strtoul(argv[1], NULL, 16); - pin = simple_strtoul(argv[3], NULL, 16); - value = simple_strtoul(argv[4], NULL, 16); - - config_switch_bit(switchaddr, port, (1 << pin), IO_PORT_OUTPUT, value); - - return 0; -} - -U_BOOT_CMD( - softswitch_output, 5, 1, do_softswitch, - "switchaddr GPA/GPB pin_offset value", - "" -); diff --git a/cmd/spibootldr.c b/cmd/spibootldr.c deleted file mode 100644 index acbb0f6969..0000000000 --- a/cmd/spibootldr.c +++ /dev/null @@ -1,37 +0,0 @@ -/* - * U-Boot - spibootldr.c - * - * Copyright (c) 2005-2008 Analog Devices Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * Licensed under the GPL-2 or later. - */ - -#include <common.h> -#include <command.h> - -#include <asm/blackfin.h> -#include <asm/mach-common/bits/bootrom.h> - -int do_spibootldr(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - s32 addr; - - /* Get the address */ - if (argc < 2) - addr = 0; - else - addr = simple_strtoul(argv[1], NULL, 16); - - printf("## Booting ldr image at SPI offset 0x%x ...\n", addr); - - return bfrom_SpiBoot(addr, BFLAG_PERIPHERAL | 4, 0, NULL); -} - -U_BOOT_CMD( - spibootldr, 2, 0, do_spibootldr, - "boot ldr image from spi", - "[offset]\n" - " - boot ldr image stored at offset into spi\n"); |