diff options
author | Wolfgang Denk <wd@denx.de> | 2011-11-16 23:24:51 +0400 |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2011-11-16 23:24:51 +0400 |
commit | 0e62e0a72cba76205c93b6913b9ae267f8fe08dc (patch) | |
tree | 47ffbd76c315fbfc9024ed16927e0c58060d3af6 /common | |
parent | f31f496e306489184c6963e0d56d0cf7b2c9cd0b (diff) | |
parent | 0c2dd9a05bdcf3b2b4880509ec690116873fe158 (diff) | |
download | u-boot-0e62e0a72cba76205c93b6913b9ae267f8fe08dc.tar.xz |
Merge branch 'master' of /home/wd/git/u-boot/custodians
* 'master' of /home/wd/git/u-boot/custodians:
arm, davinci: add DAVINCI_MMC_CLKID
arm, davinci_emac: fix driver bug if more then 3 PHYs are detected
arm, davinci: da850/dm365 lowlevel cleanup
omap5: Add omap5_evm board build support.
omap4/5: Add support for booting with CH.
omap5: emif: Add emif/ddr configurations required for omap5 evm
omap5: clocks: Add clocks support for omap5 platform.
omap5: Add minimal support for omap5430.
omap: Checkpatch fixes
omap4: make omap4 code common for future reuse
GCC4.6: Squash warnings in onenand_base.c
GCC4.6: Fix common/usb.c on xscale
OneNAND: Add simple OneNAND SPL
PXA: vpac270: Enable the new generic MMC driver
PXA: Cleanup serial_pxa
PXA: Drop csb226 and innokom boards (unmaintained)
m28evk: Fix comment about the number of RAM banks
mx31: Fix checkpatch warnings in generic.c
mx31: Use proper IO accessor for GPR register
mx31: Remove duplicate definition for GPR register
qong: Use generic function for configuring GPR register
M28EVK: Enable USB HOST support
iMX28: Add USB HOST driver
iMX28: Add USB and USB PHY register definitions
M28: Add memory detection into SPL
iMX28: Fix ARM vector handling
M28: Add doc/README.m28 documentation
M28: Add MMC SPL
iMX28: Add support for DENX M28EVK board
iMX28: Add u-boot.sb target to Makefile
iMX28: Add image header generator tool
iMX28: Add driver for internal RTC
iMX28: Add GPMI NAND driver
iMX28: Add APBH DMA driver
iMX28: Add SPI driver
iMX28: Add GPIO control
iMX28: Add I2C bus driver
iMX28: Add PINMUX control
FEC: Add support for iMX28 quirks
iMX28: Add SSP MMC driver
iMX28: Initial support for iMX28 CPU
MX25: zmx25: GCC4.6 fix build warnings
da850: add new config file for AM18xx
BeagleBoard: config: Switch to ttyO2
OMAP3: Change omap3_evm maintainer
devkit8000: Fix NAND SPL on boards with 256MB NAND
integrator: enable Vpp and disable flash protection
integrator: add system controller header
integrator: make flash writeable on boot
integrator: use io-accessors for board init
integrator: move text offset to config
integrator: pass configs for core modules
ARM: remove superfluous setting of arch_number in board specific code.
SPL: Allow ARM926EJS to avoid compiling in the CPU support code
integrator: do not test first part of the memory
arm: a320: fix broken timer
ARM: define CONFIG_MACH_TYPE for all ronetix boards
dm646x: pass board revision info to kernel
dm646x: add new configuration for dm6467T
arm, davinci: Fix setting of the SDRAM configuration register
arm, davinci: Remove the duplication of LPSC functions
arm, davinci: Rename AM1808 lowlevel functions to DA850
da8xxevm: fix build error
ARM: re-add MACH_TYPE_XXXXXX for VCMA9 board and add CONFIG_MACH_TYPE
Diffstat (limited to 'common')
-rw-r--r-- | common/usb.c | 13 |
1 files changed, 9 insertions, 4 deletions
diff --git a/common/usb.c b/common/usb.c index bed5116505..4418c70f46 100644 --- a/common/usb.c +++ b/common/usb.c @@ -263,18 +263,24 @@ int usb_maxpacket(struct usb_device *dev, unsigned long pipe) return dev->epmaxpacketin[((pipe>>15) & 0xf)]; } -/* The routine usb_set_maxpacket_ep() is extracted from the loop of routine +/* + * The routine usb_set_maxpacket_ep() is extracted from the loop of routine * usb_set_maxpacket(), because the optimizer of GCC 4.x chokes on this routine * when it is inlined in 1 single routine. What happens is that the register r3 * is used as loop-count 'i', but gets overwritten later on. * This is clearly a compiler bug, but it is easier to workaround it here than * to update the compiler (Occurs with at least several GCC 4.{1,2},x * CodeSourcery compilers like e.g. 2007q3, 2008q1, 2008q3 lite editions on ARM) + * + * NOTE: Similar behaviour was observed with GCC4.6 on ARMv5. */ static void __attribute__((noinline)) -usb_set_maxpacket_ep(struct usb_device *dev, struct usb_endpoint_descriptor *ep) +usb_set_maxpacket_ep(struct usb_device *dev, int if_idx, int ep_idx) { int b; + struct usb_endpoint_descriptor *ep; + + ep = &dev->config.if_desc[if_idx].ep_desc[ep_idx]; b = ep->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; @@ -313,8 +319,7 @@ int usb_set_maxpacket(struct usb_device *dev) for (i = 0; i < dev->config.desc.bNumInterfaces; i++) for (ii = 0; ii < dev->config.if_desc[i].desc.bNumEndpoints; ii++) - usb_set_maxpacket_ep(dev, - &dev->config.if_desc[i].ep_desc[ii]); + usb_set_maxpacket_ep(dev, i, ii); return 0; } |