diff options
author | Markus Klotzbuecher <markus.klotzbuecher@kistler.com> | 2019-05-15 16:15:54 +0300 |
---|---|---|
committer | Heiko Schocher <hs@denx.de> | 2019-07-09 08:00:21 +0300 |
commit | a9221f3ebd6dc71b33c14055504446d8e08f372b (patch) | |
tree | c73ca07f3f9a1291ce5e6a0232501400d61003eb /configs/sama5d2_icp_mmc_defconfig | |
parent | ff4818cc3ec105a5a250188e6914ae233b75aa84 (diff) | |
download | u-boot-a9221f3ebd6dc71b33c14055504446d8e08f372b.tar.xz |
at91, omap2plus: configs: migrate CONFIG_ENV_ to defconfigs
Enable the extended ENV options for AT91 and OMAP2PLUS in order to be
able to use CONFIG_ENV_UBI_* on these architectures.
As this change also makes the configs ENV_SIZE, ENV_SECT_SIZE,
ENV_OFFSET visible to AT91 and OMAP2PLUS, migrate users of these to
KConfig.
This migration was run using an extended moveconfig.py which evaluates
expressions such as "(512 << 10)". See patch ("moveconfig: expand
simple expressions").
All modified boards were built with SOURCE_DATE_EPOCH=0 before and
after the change and successfully confirmed that the identical binary
is generated (the only exception was igep00x0, which does not define
CONFIG_ENV_IS_IN_UBI in the original board header. Once that is
defined, the test passes too).
hs: rebased patch to:
68b90e57bc: "configs: tinker-rk3288 disable CONFIG_SPL_I2C_SUPPORT"
Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'configs/sama5d2_icp_mmc_defconfig')
-rw-r--r-- | configs/sama5d2_icp_mmc_defconfig | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/configs/sama5d2_icp_mmc_defconfig b/configs/sama5d2_icp_mmc_defconfig index e0471086d6..dce480913a 100644 --- a/configs/sama5d2_icp_mmc_defconfig +++ b/configs/sama5d2_icp_mmc_defconfig @@ -9,6 +9,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_ENV_SIZE=0x4000 CONFIG_SPL=y CONFIG_DEBUG_UART_BOARD_INIT=y CONFIG_DEBUG_UART_BASE=0xf801c000 |