diff options
author | Jagan Teki <jagan@amarulasolutions.com> | 2021-03-16 19:22:03 +0300 |
---|---|---|
committer | Patrice Chotard <patrice.chotard@foss.st.com> | 2021-04-09 12:53:00 +0300 |
commit | 30edf40fa8362f80a0916ef43e6a0e75a6031e10 (patch) | |
tree | e326d6ad429ba32d26f097491787a0f450d69a0d /configs | |
parent | 14dcdc6065f942bf235a20e4dde9fbab1ff7efa5 (diff) | |
download | u-boot-30edf40fa8362f80a0916ef43e6a0e75a6031e10.tar.xz |
board: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
Evaluation Board.
Genaral features:
- LCD 7" C.Touch
- microSD slot
- Ethernet 1Gb
- Wifi/BT
- 2x LVDS Full HD interfaces
- 3x USB 2.0
- 1x USB 3.0
- HDMI Out
- Mini PCIe
- MIPI CSI
- 2x CAN
- Audio Out
i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.
i.Core STM32MP1 needs to mount on top of this Evaluation board for
creating complete i.Core STM32MP1 EDIMM2.2 Starter Kit.
Linux dts commit details:
commit <adc0496104b6> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1
EDIMM2.2 Starter Kit")
Add support for it.
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Diffstat (limited to 'configs')
-rw-r--r-- | configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig | 79 |
1 files changed, 79 insertions, 0 deletions
diff --git a/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig b/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig new file mode 100644 index 0000000000..2bfaf65d3c --- /dev/null +++ b/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig @@ -0,0 +1,79 @@ +CONFIG_ARM=y +CONFIG_ARCH_STM32MP=y +CONFIG_SYS_MALLOC_F_LEN=0x3000 +CONFIG_SYS_MEMTEST_START=0xc0000000 +CONFIG_SYS_MEMTEST_END=0xc4000000 +CONFIG_ENV_OFFSET=0x280000 +CONFIG_SPL_TEXT_BASE=0x2FFC2500 +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL=y +CONFIG_TARGET_ICORE_STM32MP1=y +CONFIG_ENV_OFFSET_REDUND=0x2C0000 +# CONFIG_ARMV7_VIRT is not set +CONFIG_DEFAULT_DEVICE_TREE="stm32mp157a-icore-stm32mp1-edimm2.2" +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3 +CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SYS_PROMPT="STM32MP> " +CONFIG_CMD_ADTIMG=y +CONFIG_CMD_ERASEENV=y +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_ADC=y +CONFIG_CMD_CLK=y +CONFIG_CMD_FUSE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_REMOTEPROC=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_PMIC=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_EXT4_WRITE=y +# CONFIG_SPL_DOS_PARTITION is not set +CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-names interrupts-extended interrupt-controller \\\#interrupt-cells interrupt-parent dmas dma-names assigned-clocks assigned-clock-rates assigned-clock-parents hwlocks" +CONFIG_ENV_IS_NOWHERE=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +# CONFIG_SPL_ENV_IS_NOWHERE is not set +CONFIG_DM_HWSPINLOCK=y +CONFIG_HWSPINLOCK_STM32=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_STM32F7=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_DM_MAILBOX=y +CONFIG_STM32_IPCC=y +CONFIG_STM32_FMC2_EBI=y +CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_STM32_SDMMC2=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH=y +CONFIG_DWC_ETH_QOS=y +CONFIG_PHY=y +CONFIG_PINCONF=y +# CONFIG_SPL_PINCTRL_FULL is not set +CONFIG_PINCTRL_STMFX=y +CONFIG_DM_PMIC=y +# CONFIG_SPL_PMIC_CHILDREN is not set +CONFIG_PMIC_STPMIC1=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_REMOTEPROC_STM32_COPRO=y +CONFIG_DM_RTC=y +CONFIG_RTC_STM32=y +CONFIG_SERIAL_RX_BUFFER=y +CONFIG_WDT=y +CONFIG_WDT_STM32MP=y +CONFIG_LZO=y +CONFIG_ERRNO_STR=y |