brppt1: Remove unused board variants

The SPI and NAND board variants never went into production.
Drop those board variants.

Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>

2 files changed, 0 insertions, 252 deletions

diff --git a/configs/brppt1_nand_defconfig b/configs/brppt1_nand_defconfig
deleted file mode 100644
index c5981bad49..0000000000
--- a/configs/brppt1_nand_defconfig
+++ /dev/null
@@ -1,122 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_SYS_MALLOC_LEN=0x500000
-CONFIG_SPL_GPIO=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x10000
-CONFIG_ENV_OFFSET=0x60000
-CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="am335x-brppt1-nand"
-CONFIG_AM33XX=y
-CONFIG_TARGET_BRPPT1=y
-CONFIG_SPL_SERIAL=y
-CONFIG_SPL=y
-CONFIG_SYS_LOAD_ADDR=0x80000000
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
-# CONFIG_EXPERT is not set
-# CONFIG_FIT is not set
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_BOOTDELAY=0
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="run b_default"
-CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="run cfgscr; run brdefaultip"
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_ARCH_MISC_INIT=y
-CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-CONFIG_SYS_SPL_MALLOC=y
-CONFIG_SYS_SPL_MALLOC_SIZE=0x500000
-# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
-CONFIG_SPL_I2C=y
-CONFIG_SPL_NAND_DRIVERS=y
-CONFIG_SPL_NAND_ECC=y
-CONFIG_SPL_NAND_BASE=y
-CONFIG_SPL_POWER=y
-CONFIG_SPL_WATCHDOG=y
-CONFIG_SPL_YMODEM_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_MAXARGS=64
-CONFIG_SYS_CBSIZE=512
-CONFIG_SYS_PBSIZE=532
-CONFIG_CMD_BOOTZ=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
-# CONFIG_CMD_IMI is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_EDITENV is not set
-# CONFIG_CMD_CRC32 is not set
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_NAND=y
-CONFIG_CMD_PART=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_ITEST is not set
-CONFIG_CMD_DHCP=y
-CONFIG_BOOTP_MAY_FAIL=y
-# CONFIG_CMD_NFS is not set
-CONFIG_SYS_DISABLE_AUTOLOAD=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_BOOTCOUNT=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:128k(MLO),128k(cfgscr),128k(dtb),128k(u-boot-env),512k(u-boot),4m(kernel),128m(rootfs),-(user)"
-# CONFIG_SPL_DOS_PARTITION is not set
-CONFIG_OF_CONTROL=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clocks clock-names interrupt-parent interrupt-controller interrupt-cells dma-names dmas "
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_VERSION_VARIABLE=y
-CONFIG_NET_RETRY_COUNT=10
-CONFIG_BOOTP_SEND_HOSTNAME=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_NETCONSOLE=y
-CONFIG_DM=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-# CONFIG_OF_TRANSLATE is not set
-CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_DM_I2C=y
-CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
-CONFIG_MISC=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
-CONFIG_SYS_NAND_PAGE_COUNT=0x40
-CONFIG_SYS_NAND_PAGE_SIZE=0x800
-CONFIG_SYS_NAND_OOBSIZE=0x40
-CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
-CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
-CONFIG_PHY_NATSEMI=y
-CONFIG_DRIVER_TI_CPSW=y
-CONFIG_DM_PMIC=y
-# CONFIG_SPL_DM_PMIC is not set
-CONFIG_PMIC_TPS65217=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_USB_MUSB_HOST=y
-CONFIG_USB_MUSB_GADGET=y
-CONFIG_USB_MUSB_TI=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_FAT_WRITE=y
-CONFIG_LZO=y
-# CONFIG_OF_LIBFDT_OVERLAY is not set
-# CONFIG_EFI_LOADER is not set
diff --git a/configs/brppt1_spi_defconfig b/configs/brppt1_spi_defconfig
deleted file mode 100644
index fa6b840d9e..0000000000
--- a/configs/brppt1_spi_defconfig
+++ /dev/null
@@ -1,130 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_SYS_MALLOC_LEN=0x500000
-CONFIG_SYS_MALLOC_F_LEN=0x4000
-CONFIG_SPL_GPIO=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x10000
-CONFIG_ENV_OFFSET=0x20000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_DM_GPIO=y
-CONFIG_SPL_DM_SPI=y
-CONFIG_DEFAULT_DEVICE_TREE="am335x-brppt1-spi"
-CONFIG_AM33XX=y
-CONFIG_TARGET_BRPPT1=y
-CONFIG_SPL_SERIAL=y
-CONFIG_SPL=y
-CONFIG_ENV_OFFSET_REDUND=0x30000
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x80000000
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
-# CONFIG_EXPERT is not set
-# CONFIG_FIT is not set
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_SPI_BOOT=y
-CONFIG_BOOTDELAY=0
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="run b_default"
-CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="run cfgscr; run brdefaultip"
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_ARCH_MISC_INIT=y
-CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-CONFIG_SYS_SPL_MALLOC=y
-CONFIG_SYS_SPL_MALLOC_SIZE=0x500000
-# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
-CONFIG_SPL_I2C=y
-# CONFIG_SPL_NAND_SUPPORT is not set
-CONFIG_SPL_DM_SPI_FLASH=y
-CONFIG_SPL_POWER=y
-CONFIG_SPL_SPI_LOAD=y
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000
-CONFIG_SPL_WATCHDOG=y
-CONFIG_SPL_YMODEM_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_MAXARGS=64
-CONFIG_SYS_CBSIZE=512
-CONFIG_SYS_PBSIZE=532
-CONFIG_CMD_BOOTZ=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
-# CONFIG_CMD_IMI is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_EDITENV is not set
-# CONFIG_CMD_CRC32 is not set
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_BKOPS_ENABLE=y
-CONFIG_CMD_PART=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_ITEST is not set
-CONFIG_CMD_DHCP=y
-CONFIG_BOOTP_MAY_FAIL=y
-# CONFIG_CMD_NFS is not set
-CONFIG_SYS_DISABLE_AUTOLOAD=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_BOOTCOUNT=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-# CONFIG_SPL_DOS_PARTITION is not set
-CONFIG_OF_CONTROL=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clocks clock-names interrupt-parent interrupt-controller interrupt-cells dma-names dmas "
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_VERSION_VARIABLE=y
-CONFIG_NET_RETRY_COUNT=10
-CONFIG_BOOTP_SEND_HOSTNAME=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_NETCONSOLE=y
-CONFIG_DM=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-# CONFIG_OF_TRANSLATE is not set
-CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_DM_I2C=y
-CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
-CONFIG_MISC=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_MTD=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_SPEED=24000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_NATSEMI=y
-CONFIG_DRIVER_TI_CPSW=y
-CONFIG_DM_PMIC=y
-# CONFIG_SPL_DM_PMIC is not set
-CONFIG_PMIC_TPS65217=y
-CONFIG_DM_SERIAL=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_OMAP3_SPI=y
-CONFIG_USB=y
-CONFIG_USB_MUSB_HOST=y
-CONFIG_USB_MUSB_GADGET=y
-CONFIG_USB_MUSB_TI=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_FAT_WRITE=y
-CONFIG_LZO=y
-# CONFIG_OF_LIBFDT_OVERLAY is not set
-# CONFIG_EFI_LOADER is not set