diff options
author | Stefan Roese <sr@denx.de> | 2008-10-13 13:17:31 +0400 |
---|---|---|
committer | Stefan Roese <sr@denx.de> | 2008-10-13 13:17:31 +0400 |
commit | 1f6aa622e365fef9d87de84753eb08347e310a2a (patch) | |
tree | 232149e6d93c9387b03628c5d3283cecf7719476 /cpu | |
parent | 542b385a620a1783454a00424930e51895f45073 (diff) | |
parent | df4a0796e86662536df2387ddcf969c2a704bcc2 (diff) | |
download | u-boot-1f6aa622e365fef9d87de84753eb08347e310a2a.tar.xz |
Merge branch 'master' of /home/stefan/git/u-boot/u-boot
Diffstat (limited to 'cpu')
-rw-r--r-- | cpu/arm1136/mx31/interrupts.c | 79 | ||||
-rw-r--r-- | cpu/mpc83xx/spd_sdram.c | 2 | ||||
-rw-r--r-- | cpu/mpc85xx/cpu.c | 3 | ||||
-rw-r--r-- | cpu/mpc85xx/fdt.c | 3 | ||||
-rw-r--r-- | cpu/mpc85xx/speed.c | 7 |
5 files changed, 57 insertions, 37 deletions
diff --git a/cpu/arm1136/mx31/interrupts.c b/cpu/arm1136/mx31/interrupts.c index 6e08c71a10..cd57071ec6 100644 --- a/cpu/arm1136/mx31/interrupts.c +++ b/cpu/arm1136/mx31/interrupts.c @@ -27,30 +27,49 @@ #define TIMER_BASE 0x53f90000 /* General purpose timer 1 */ /* General purpose timers registers */ -#define GPTCR __REG(TIMER_BASE) /* Control register */ -#define GPTPR __REG(TIMER_BASE + 0x4) /* Prescaler register */ -#define GPTSR __REG(TIMER_BASE + 0x8) /* Status register */ -#define GPTCNT __REG(TIMER_BASE + 0x24) /* Counter register */ +#define GPTCR __REG(TIMER_BASE) /* Control register */ +#define GPTPR __REG(TIMER_BASE + 0x4) /* Prescaler register */ +#define GPTSR __REG(TIMER_BASE + 0x8) /* Status register */ +#define GPTCNT __REG(TIMER_BASE + 0x24) /* Counter register */ /* General purpose timers bitfields */ -#define GPTCR_SWR (1<<15) /* Software reset */ -#define GPTCR_FRR (1<<9) /* Freerun / restart */ -#define GPTCR_CLKSOURCE_32 (4<<6) /* Clock source */ -#define GPTCR_TEN (1) /* Timer enable */ +#define GPTCR_SWR (1 << 15) /* Software reset */ +#define GPTCR_FRR (1 << 9) /* Freerun / restart */ +#define GPTCR_CLKSOURCE_32 (4 << 6) /* Clock source */ +#define GPTCR_TEN 1 /* Timer enable */ + +/* "time" is measured in 1 / CFG_HZ seconds, "tick" is internal timer period */ +#ifdef CONFIG_MX31_TIMER_HIGH_PRECISION +/* ~0.4% error - measured with stop-watch on 100s boot-delay */ +#define TICK_TO_TIME(t) ((t) * CFG_HZ / CONFIG_MX31_CLK32) +#define TIME_TO_TICK(t) ((unsigned long long)(t) * CONFIG_MX31_CLK32 / CFG_HZ) +#define US_TO_TICK(t) (((unsigned long long)(t) * CONFIG_MX31_CLK32 + \ + 999999) / 1000000) +#else +/* ~2% error */ +#define TICK_PER_TIME ((CONFIG_MX31_CLK32 + CFG_HZ / 2) / CFG_HZ) +#define US_PER_TICK (1000000 / CONFIG_MX31_CLK32) +#define TICK_TO_TIME(t) ((t) / TICK_PER_TIME) +#define TIME_TO_TICK(t) ((unsigned long long)(t) * TICK_PER_TIME) +#define US_TO_TICK(t) (((t) + US_PER_TICK - 1) / US_PER_TICK) +#endif static ulong timestamp; static ulong lastinc; /* nothing really to do with interrupts, just starts up a counter. */ +/* The 32768Hz 32-bit timer overruns in 131072 seconds */ int interrupt_init (void) { int i; /* setup GP Timer 1 */ GPTCR = GPTCR_SWR; - for ( i=0; i<100; i++) GPTCR = 0; /* We have no udelay by now */ + for (i = 0; i < 100; i++) + GPTCR = 0; /* We have no udelay by now */ GPTPR = 0; /* 32Khz */ - GPTCR |= GPTCR_CLKSOURCE_32 | GPTCR_TEN; /* Freerun Mode, PERCLK1 input */ + /* Freerun Mode, PERCLK1 input */ + GPTCR |= GPTCR_CLKSOURCE_32 | GPTCR_TEN; return 0; } @@ -67,7 +86,7 @@ void reset_timer(void) reset_timer_masked(); } -ulong get_timer_masked (void) +unsigned long long get_ticks (void) { ulong now = GPTCNT; /* current tick value */ @@ -80,6 +99,17 @@ ulong get_timer_masked (void) return timestamp; } +ulong get_timer_masked (void) +{ + /* + * get_ticks() returns a long long (64 bit), it wraps in + * 2^64 / CONFIG_MX31_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~ + * 5 * 10^9 days... and get_ticks() * CFG_HZ wraps in + * 5 * 10^6 days - long enough. + */ + return TICK_TO_TIME(get_ticks()); +} + ulong get_timer (ulong base) { return get_timer_masked () - base; @@ -87,29 +117,20 @@ ulong get_timer (ulong base) void set_timer (ulong t) { + timestamp = TIME_TO_TICK(t); } /* delay x useconds AND perserve advance timstamp value */ void udelay (unsigned long usec) { - ulong tmo, tmp; - - if (usec >= 1000) { /* if "big" number, spread normalization to seconds */ - tmo = usec / 1000; /* start to normalize for usec to ticks per sec */ - tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */ - tmo /= 1000; /* finish normalize. */ - } else { /* else small number, don't kill it prior to HZ multiply */ - tmo = usec * CFG_HZ; - tmo /= (1000*1000); - } - - tmp = get_timer (0); /* get current timestamp */ - if ( (tmo + tmp + 1) < tmp )/* if setting this forward will roll time stamp */ - reset_timer_masked (); /* reset "advancing" timestamp to 0, set lastinc value */ - else - tmo += tmp; /* else, set advancing stamp wake up time */ - while (get_timer_masked () < tmo)/* loop till event */ - /*NOP*/; + unsigned long long tmp; + ulong tmo; + + tmo = US_TO_TICK(usec); + tmp = get_ticks() + tmo; /* get current timestamp */ + + while (get_ticks() < tmp) /* loop till event */ + /*NOP*/; } void reset_cpu (ulong addr) diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index 76f2474491..f4a0e90012 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -274,7 +274,7 @@ long int spd_sdram() /* * Set up LAWBAR for all of DDR. */ - ecm->bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff); + ecm->bar = CFG_DDR_SDRAM_BASE & 0xfffff000; ecm->ar = (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & law_size)); debug("DDR:bar=0x%08x\n", ecm->bar); debug("DDR:ar=0x%08x\n", ecm->ar); diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c index 67e81c0574..f15b0a8c9e 100644 --- a/cpu/mpc85xx/cpu.c +++ b/cpu/mpc85xx/cpu.c @@ -85,7 +85,8 @@ int checkcpu (void) struct cpu_type *cpu; #ifdef CONFIG_DDR_CLK_FREQ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); - u32 ddr_ratio = ((gur->porpllsr) & 0x00003e00) >> 9; + u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO) + >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT; #else u32 ddr_ratio = 0; #endif diff --git a/cpu/mpc85xx/fdt.c b/cpu/mpc85xx/fdt.c index bc1550d7c2..037a60fba9 100644 --- a/cpu/mpc85xx/fdt.c +++ b/cpu/mpc85xx/fdt.c @@ -152,7 +152,6 @@ static inline void ft_fixup_l2cache(void *blob) } fdt_setprop(blob, off, "cache-unified", NULL, 0); fdt_setprop_cell(blob, off, "cache-block-size", line_size); - fdt_setprop_cell(blob, off, "cache-line-size", line_size); fdt_setprop_cell(blob, off, "cache-size", size); fdt_setprop_cell(blob, off, "cache-sets", num_sets); fdt_setprop_cell(blob, off, "cache-level", 2); @@ -181,7 +180,6 @@ static inline void ft_fixup_cache(void *blob) dnum_sets = dsize / (dline_size * dnum_ways); fdt_setprop_cell(blob, off, "d-cache-block-size", dline_size); - fdt_setprop_cell(blob, off, "d-cache-line-size", dline_size); fdt_setprop_cell(blob, off, "d-cache-size", dsize); fdt_setprop_cell(blob, off, "d-cache-sets", dnum_sets); @@ -192,7 +190,6 @@ static inline void ft_fixup_cache(void *blob) inum_sets = isize / (iline_size * inum_ways); fdt_setprop_cell(blob, off, "i-cache-block-size", iline_size); - fdt_setprop_cell(blob, off, "i-cache-line-size", iline_size); fdt_setprop_cell(blob, off, "i-cache-size", isize); fdt_setprop_cell(blob, off, "i-cache-sets", inum_sets); diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c index 1cda1e34eb..70dfad0321 100644 --- a/cpu/mpc85xx/speed.c +++ b/cpu/mpc85xx/speed.c @@ -54,7 +54,8 @@ void get_sys_info (sys_info_t * sysInfo) #ifdef CONFIG_DDR_CLK_FREQ { - u32 ddr_ratio = ((gur->porpllsr) & 0x00003e00) >> 9; + u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO) + >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT; if (ddr_ratio != 0x7) sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ; } @@ -101,9 +102,9 @@ int get_clocks (void) * PORDEVSR2_SEC_CFG bit is 0 on all 85xx boards that are not an 8544. */ if (gur->pordevsr2 & MPC85xx_PORDEVSR2_SEC_CFG) - gd->i2c1_clk = sys_info.freqSystemBus / 3; - else gd->i2c1_clk = sys_info.freqSystemBus / 2; + else + gd->i2c1_clk = sys_info.freqSystemBus / 3; #else /* Most 85xx SOCs use CCB/2, so this is the default behavior. */ gd->i2c1_clk = sys_info.freqSystemBus / 2; |