diff options
author | Wolfgang Denk <wd@denx.de> | 2010-04-08 02:15:11 +0400 |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2010-04-08 02:15:11 +0400 |
commit | 92abce8731750e92d9b5adf2e506fdb50eff59bc (patch) | |
tree | 8fc5f57aeee08b9a7c37e5351d464f80a3875516 /cpu | |
parent | 6a1f7e54c2dd8888dbc118e8de372dec29a0a9c5 (diff) | |
parent | d0b0dcaa220549999d6ea74cf87487846c186a0f (diff) | |
download | u-boot-92abce8731750e92d9b5adf2e506fdb50eff59bc.tar.xz |
Merge branch 'master' of git://git.denx.de/u-boot-i2c
Diffstat (limited to 'cpu')
-rw-r--r-- | cpu/ppc4xx/Makefile | 1 | ||||
-rw-r--r-- | cpu/ppc4xx/i2c.c | 439 |
2 files changed, 0 insertions, 440 deletions
diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile index 365f966fed..88d53fbb1a 100644 --- a/cpu/ppc4xx/Makefile +++ b/cpu/ppc4xx/Makefile @@ -52,7 +52,6 @@ COBJS += denali_data_eye.o COBJS += denali_spd_ddr2.o COBJS += ecc.o COBJS += fdt.o -COBJS += i2c.o COBJS += interrupts.o COBJS += iop480_uart.o ifdef CONFIG_CMD_REGINFO diff --git a/cpu/ppc4xx/i2c.c b/cpu/ppc4xx/i2c.c deleted file mode 100644 index 9b86187a79..0000000000 --- a/cpu/ppc4xx/i2c.c +++ /dev/null @@ -1,439 +0,0 @@ -/* - * (C) Copyright 2007-2009 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * based on work by Anne Sophie Harnois <anne-sophie.harnois@nextream.fr> - * - * (C) Copyright 2001 - * Bill Hunter, Wave 7 Optics, williamhunter@mediaone.net - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <ppc4xx.h> -#include <4xx_i2c.h> -#include <i2c.h> -#include <asm-ppc/io.h> - -#ifdef CONFIG_HARD_I2C - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_I2C_MULTI_BUS) -/* - * Initialize the bus pointer to whatever one the SPD EEPROM is on. - * Default is bus 0. This is necessary because the DDR initialization - * runs from ROM, and we can't switch buses because we can't modify - * the global variables. - */ -#ifndef CONFIG_SYS_SPD_BUS_NUM -#define CONFIG_SYS_SPD_BUS_NUM 0 -#endif -static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = - CONFIG_SYS_SPD_BUS_NUM; -#endif /* CONFIG_I2C_MULTI_BUS */ - -static void _i2c_bus_reset(void) -{ - struct ppc4xx_i2c *i2c = (struct ppc4xx_i2c *)I2C_BASE_ADDR; - int i; - u8 dc; - - /* Reset status register */ - /* write 1 in SCMP and IRQA to clear these fields */ - out_8(&i2c->sts, 0x0A); - - /* write 1 in IRQP IRQD LA ICT XFRA to clear these fields */ - out_8(&i2c->extsts, 0x8F); - - /* Place chip in the reset state */ - out_8(&i2c->xtcntlss, IIC_XTCNTLSS_SRST); - - /* Check if bus is free */ - dc = in_8(&i2c->directcntl); - if (!DIRCTNL_FREE(dc)){ - /* Try to set bus free state */ - out_8(&i2c->directcntl, IIC_DIRCNTL_SDAC | IIC_DIRCNTL_SCC); - - /* Wait until we regain bus control */ - for (i = 0; i < 100; ++i) { - dc = in_8(&i2c->directcntl); - if (DIRCTNL_FREE(dc)) - break; - - /* Toggle SCL line */ - dc ^= IIC_DIRCNTL_SCC; - out_8(&i2c->directcntl, dc); - udelay(10); - dc ^= IIC_DIRCNTL_SCC; - out_8(&i2c->directcntl, dc); - } - } - - /* Remove reset */ - out_8(&i2c->xtcntlss, 0); -} - -void i2c_init(int speed, int slaveaddr) -{ - struct ppc4xx_i2c *i2c; - int val, divisor; - int bus; - -#ifdef CONFIG_SYS_I2C_INIT_BOARD - /* - * Call board specific i2c bus reset routine before accessing the - * environment, which might be in a chip on that bus. For details - * about this problem see doc/I2C_Edge_Conditions. - */ - i2c_init_board(); -#endif - - for (bus = 0; bus < CONFIG_SYS_MAX_I2C_BUS; bus++) { - I2C_SET_BUS(bus); - - /* Set i2c pointer after calling I2C_SET_BUS() */ - i2c = (struct ppc4xx_i2c *)I2C_BASE_ADDR; - - /* Handle possible failed I2C state */ - /* FIXME: put this into i2c_init_board()? */ - _i2c_bus_reset(); - - /* clear lo master address */ - out_8(&i2c->lmadr, 0); - - /* clear hi master address */ - out_8(&i2c->hmadr, 0); - - /* clear lo slave address */ - out_8(&i2c->lsadr, 0); - - /* clear hi slave address */ - out_8(&i2c->hsadr, 0); - - /* Clock divide Register */ - /* set divisor according to freq_opb */ - divisor = (get_OPB_freq() - 1) / 10000000; - if (divisor == 0) - divisor = 1; - out_8(&i2c->clkdiv, divisor); - - /* no interrupts */ - out_8(&i2c->intrmsk, 0); - - /* clear transfer count */ - out_8(&i2c->xfrcnt, 0); - - /* clear extended control & stat */ - /* write 1 in SRC SRS SWC SWS to clear these fields */ - out_8(&i2c->xtcntlss, 0xF0); - - /* Mode Control Register - Flush Slave/Master data buffer */ - out_8(&i2c->mdcntl, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB); - - val = in_8(&i2c->mdcntl); - - /* Ignore General Call, slave transfers are ignored, - * disable interrupts, exit unknown bus state, enable hold - * SCL 100kHz normaly or FastMode for 400kHz and above - */ - - val |= IIC_MDCNTL_EUBS | IIC_MDCNTL_HSCL; - if (speed >= 400000) - val |= IIC_MDCNTL_FSM; - out_8(&i2c->mdcntl, val); - - /* clear control reg */ - out_8(&i2c->cntl, 0x00); - } - - /* set to SPD bus as default bus upon powerup */ - I2C_SET_BUS(CONFIG_SYS_SPD_BUS_NUM); -} - -/* - * This code tries to use the features of the 405GP i2c - * controller. It will transfer up to 4 bytes in one pass - * on the loop. It only does out_8((u8 *)lbz) to the buffer when it - * is possible to do out16(lhz) transfers. - * - * cmd_type is 0 for write 1 for read. - * - * addr_len can take any value from 0-255, it is only limited - * by the char, we could make it larger if needed. If it is - * 0 we skip the address write cycle. - * - * Typical case is a Write of an addr followd by a Read. The - * IBM FAQ does not cover this. On the last byte of the write - * we don't set the creg CHT bit, and on the first bytes of the - * read we set the RPST bit. - * - * It does not support address only transfers, there must be - * a data part. If you want to write the address yourself, put - * it in the data pointer. - * - * It does not support transfer to/from address 0. - * - * It does not check XFRCNT. - */ -static int i2c_transfer(unsigned char cmd_type, - unsigned char chip, - unsigned char addr[], - unsigned char addr_len, - unsigned char data[], - unsigned short data_len) -{ - struct ppc4xx_i2c *i2c = (struct ppc4xx_i2c *)I2C_BASE_ADDR; - u8 *ptr; - int reading; - int tran, cnt; - int result; - int status; - int i; - u8 creg; - - if (data == 0 || data_len == 0) { - /* Don't support data transfer of no length or to address 0 */ - printf( "i2c_transfer: bad call\n" ); - return IIC_NOK; - } - if (addr && addr_len) { - ptr = addr; - cnt = addr_len; - reading = 0; - } else { - ptr = data; - cnt = data_len; - reading = cmd_type; - } - - /* Clear Stop Complete Bit */ - out_8(&i2c->sts, IIC_STS_SCMP); - - /* Check init */ - i = 10; - do { - /* Get status */ - status = in_8(&i2c->sts); - i--; - } while ((status & IIC_STS_PT) && (i > 0)); - - if (status & IIC_STS_PT) { - result = IIC_NOK_TOUT; - return(result); - } - - /* flush the Master/Slave Databuffers */ - out_8(&i2c->mdcntl, in_8(&i2c->mdcntl) | - IIC_MDCNTL_FMDB | IIC_MDCNTL_FSDB); - - /* need to wait 4 OPB clocks? code below should take that long */ - - /* 7-bit adressing */ - out_8(&i2c->hmadr, 0); - out_8(&i2c->lmadr, chip); - - tran = 0; - result = IIC_OK; - creg = 0; - - while (tran != cnt && (result == IIC_OK)) { - int bc,j; - - /* - * Control register = - * Normal transfer, 7-bits adressing, Transfer up to - * bc bytes, Normal start, Transfer is a sequence of transfers - */ - creg |= IIC_CNTL_PT; - - bc = (cnt - tran) > 4 ? 4 : cnt - tran; - creg |= (bc - 1) << 4; - /* if the real cmd type is write continue trans */ - if ((!cmd_type && (ptr == addr)) || ((tran + bc) != cnt)) - creg |= IIC_CNTL_CHT; - - if (reading) { - creg |= IIC_CNTL_READ; - } else { - for(j = 0; j < bc; j++) { - /* Set buffer */ - out_8(&i2c->mdbuf, ptr[tran + j]); - } - } - out_8(&i2c->cntl, creg); - - /* - * Transfer is in progress - * we have to wait for upto 5 bytes of data - * 1 byte chip address+r/w bit then bc bytes - * of data. - * udelay(10) is 1 bit time at 100khz - * Doubled for slop. 20 is too small. - */ - i = 2 * 5 * 8; - do { - /* Get status */ - status = in_8(&i2c->sts); - udelay(10); - i--; - } while ((status & IIC_STS_PT) && !(status & IIC_STS_ERR) && - (i > 0)); - - if (status & IIC_STS_ERR) { - result = IIC_NOK; - status = in_8(&i2c->extsts); - /* Lost arbitration? */ - if (status & IIC_EXTSTS_LA) - result = IIC_NOK_LA; - /* Incomplete transfer? */ - if (status & IIC_EXTSTS_ICT) - result = IIC_NOK_ICT; - /* Transfer aborted? */ - if (status & IIC_EXTSTS_XFRA) - result = IIC_NOK_XFRA; - } else if ( status & IIC_STS_PT) { - result = IIC_NOK_TOUT; - } - - /* Command is reading => get buffer */ - if ((reading) && (result == IIC_OK)) { - /* Are there data in buffer */ - if (status & IIC_STS_MDBS) { - /* - * even if we have data we have to wait 4OPB - * clocks for it to hit the front of the FIFO, - * after that we can just read. We should check - * XFCNT here and if the FIFO is full there is - * no need to wait. - */ - udelay(1); - for (j = 0; j < bc; j++) - ptr[tran + j] = in_8(&i2c->mdbuf); - } else - result = IIC_NOK_DATA; - } - creg = 0; - tran += bc; - if (ptr == addr && tran == cnt) { - ptr = data; - cnt = data_len; - tran = 0; - reading = cmd_type; - if (reading) - creg = IIC_CNTL_RPST; - } - } - return result; -} - -int i2c_probe(uchar chip) -{ - uchar buf[1]; - - buf[0] = 0; - - /* - * What is needed is to send the chip address and verify that the - * address was <ACK>ed (i.e. there was a chip at that address which - * drove the data line low). - */ - return (i2c_transfer(1, chip << 1, 0, 0, buf, 1) != 0); -} - -static int ppc4xx_i2c_transfer(uchar chip, uint addr, int alen, uchar *buffer, - int len, int read) -{ - uchar xaddr[4]; - int ret; - - if (alen > 4) { - printf("I2C: addr len %d not supported\n", alen); - return 1; - } - - if (alen > 0) { - xaddr[0] = (addr >> 24) & 0xFF; - xaddr[1] = (addr >> 16) & 0xFF; - xaddr[2] = (addr >> 8) & 0xFF; - xaddr[3] = addr & 0xFF; - } - - -#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW - /* - * EEPROM chips that implement "address overflow" are ones - * like Catalyst 24WC04/08/16 which has 9/10/11 bits of - * address and the extra bits end up in the "chip address" - * bit slots. This makes a 24WC08 (1Kbyte) chip look like - * four 256 byte chips. - * - * Note that we consider the length of the address field to - * still be one byte because the extra address bits are - * hidden in the chip address. - */ - if (alen > 0) - chip |= ((addr >> (alen * 8)) & - CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW); -#endif - if ((ret = i2c_transfer(read, chip << 1, &xaddr[4 - alen], alen, - buffer, len)) != 0) { - if (gd->have_console) { - printf("I2C %s: failed %d\n", - read ? "read" : "write", ret); - } - - return 1; - } - - return 0; -} - -int i2c_read(uchar chip, uint addr, int alen, uchar * buffer, int len) -{ - return ppc4xx_i2c_transfer(chip, addr, alen, buffer, len, 1); -} - -int i2c_write(uchar chip, uint addr, int alen, uchar * buffer, int len) -{ - return ppc4xx_i2c_transfer(chip, addr, alen, buffer, len, 0); -} - -#if defined(CONFIG_I2C_MULTI_BUS) -/* - * Functions for multiple I2C bus handling - */ -unsigned int i2c_get_bus_num(void) -{ - return i2c_bus_num; -} - -int i2c_set_bus_num(unsigned int bus) -{ - if (bus >= CONFIG_SYS_MAX_I2C_BUS) - return -1; - - i2c_bus_num = bus; - - return 0; -} -#endif /* CONFIG_I2C_MULTI_BUS */ -#endif /* CONFIG_HARD_I2C */ |