diff options
author | Tom Rini <trini@konsulko.com> | 2023-02-28 01:28:21 +0300 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2023-02-28 01:28:21 +0300 |
commit | 5b197eee334bdf75cc9e9148161299679a5251ea (patch) | |
tree | edec3c21a01fb54d764d04caa2bd774823e76c2d /doc/README.bcm7xxx | |
parent | 7a826ded4a0e409d73ff4a910685821d34f1b664 (diff) | |
parent | e8c80ac0f7a13bf0fc016ce324b870c0cff7a2b8 (diff) | |
download | u-boot-5b197eee334bdf75cc9e9148161299679a5251ea.tar.xz |
Merge tag 'v2023.04-rc3' into next
Prepare v2023.04-rc3
Diffstat (limited to 'doc/README.bcm7xxx')
-rw-r--r-- | doc/README.bcm7xxx | 156 |
1 files changed, 0 insertions, 156 deletions
diff --git a/doc/README.bcm7xxx b/doc/README.bcm7xxx deleted file mode 100644 index 6839da5f97..0000000000 --- a/doc/README.bcm7xxx +++ /dev/null @@ -1,156 +0,0 @@ -Summary -======= - -This document describes how to use U-Boot on the Broadcom 7445 SoC, as -a third stage bootloader loaded by Broadcom's BOLT bootloader. - -BOLT loads U-Boot as a generic ELF binary. Some U-Boot features such -as networking are not yet available but other important features are, -including: - - - ext4 file system traversal - - - support for loading FIT images - - - advanced scripting - - - support for FIT-provided DTBs instead of relying on the - BOLT-provided DTB - -A customized version of this port has been used in production. The -same approach may work on other BCM7xxx boards, with some -configuration adjustments and memory layout experimentation. - -Build -===== - -make bcm7445_defconfig -make -${CROSS_COMPILE}strip u-boot - -Run -=== - -To tell U-Boot which serial port to use for its console, set the -"stdout-path" property in the "/chosen" node of the BOLT-generated -device tree. For example: - -BOLT> dt add prop chosen stdout-path s serial0:115200n8 - -Flash the u-boot binary into board storage, then invoke it from BOLT. -For example: - -BOLT> boot -bsu -elf flash0.u-boot1 - -This port assumes that I-cache and D-cache are already enabled when -U-Boot is entered. - -Flattened Image Tree Support -============================ - -What follows is an example FIT image source file. Build it with: - -mkimage -f image.its image.itb - -Booting the resulting image.itb was tested on BOLT v1.20, with the -following kernels: - -https://github.com/Broadcom/stblinux-3.14 -https://github.com/Broadcom/stblinux-4.1 -https://github.com/Broadcom/stblinux-4.9 - -and with a generic ARMv7 root file system. - -image.its: -/dts-v1/; -/ { - description = "BCM7445 FIT"; - images { - kernel@1 { - description = "Linux kernel"; - /* - * This kernel image output format can be - * generated with: - * - * make vmlinux - * ${CROSS_COMPILE}objcopy -O binary -S vmlinux vmlinux.bin - * gzip -9 vmlinux.bin - * - * For stblinux-3.14, the specific Broadcom - * board type should be configured in the - * kernel, for example CONFIG_BCM7445D0=y. - */ - data = /incbin/("<vmlinux.bin.gz>"); - type = "kernel"; - arch = "arm"; - os = "linux"; - compression = "gzip"; - load = <0x8000>; - entry = <0x8000>; - hash@1 { - algo = "sha256"; - }; - }; - ramdisk@1 { - description = "Initramfs root file system"; - data = /incbin/("<initramfs.cpio.gz>"); - type = "ramdisk"; - arch = "arm"; - os = "linux"; - compression = "gzip"; - /* - * Set the environment variable initrd_high to - * 0xffffffff, and set "load" and "entry" here - * to 0x0 to keep initramfs in-place and to - * accommodate stblinux bmem/CMA reservations. - */ - load = <0x0>; - entry = <0x0>; - hash@1 { - algo = "sha256"; - }; - }; - fdt@1 { - description = "Device tree dumped from BOLT"; - /* - * This DTB should be similar to the - * BOLT-generated device tree, after BOLT has - * done its runtime modifications to it. For - * example, it can be dumped from within - * U-Boot (at ${fdtcontroladdr}), after BOLT - * has loaded U-Boot. The result can be added - * to the Linux source tree as a .dts file. - * - * To support modifications to the device tree - * in-place in U-Boot, add to Linux's - * arch/arm/boot/dts/Makefile: - * - * DTC_FLAGS ?= -p 4096 - * - * This will leave some padding in the DTB and - * thus reserve room for node additions. - * - * Also, set the environment variable fdt_high - * to 0xffffffff to keep the DTB in-place and - * to accommodate stblinux bmem/CMA - * reservations. - */ - data = /incbin/("<bolt-<version>.dtb"); - type = "flat_dt"; - arch = "arm"; - compression = "none"; - hash@1 { - algo = "sha256"; - }; - }; - }; - configurations { - default = "conf@bcm7445"; - conf@bcm7445 { - description = "BCM7445 configuration"; - kernel = "kernel@1"; - ramdisk = "ramdisk@1"; - fdt = "fdt@1"; - }; - }; -}; |