diff options
| author | Lukas Auer <lukas.auer@aisec.fraunhofer.de> | 2019-08-21 22:14:49 +0300 |
|---|---|---|
| committer | Andes <uboot@andestech.com> | 2019-08-26 11:07:42 +0300 |
| commit | e456a81935aafcecc8e53a7cd35efe9267781041 (patch) | |
| tree | 2c9bdd38f2a56acfce3580257fecaf8a692651ca /doc/board/emulation | |
| parent | 109f82bea906478807d831978dc680d3ef992f17 (diff) | |
| download | u-boot-e456a81935aafcecc8e53a7cd35efe9267781041.tar.xz | |
riscv: qemu: add SPL configuration
Add two new configurations (qemu-riscv{32,64}_spl_defconfig) with SPL
enabled for RISC-V QEMU. QEMU does not require SPL to run U-Boot. The
configurations are meant to help the development of SPL on RISC-V.
The configurations enable RAM as the only SPL boot device. Images must
be loaded at address 0x80200000. In the default boot flow, U-Boot SPL
starts in machine mode, loads the OpenSBI FW_DYNAMIC firmware and U-Boot
proper from the supplied FIT image, and starts OpenSBI. U-Boot proper is
then started in supervisor mode by OpenSBI.
Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Diffstat (limited to 'doc/board/emulation')
0 files changed, 0 insertions, 0 deletions