diff options
author | Grygorii Strashko <grygorii.strashko@ti.com> | 2019-11-19 00:04:42 +0300 |
---|---|---|
committer | Joe Hershberger <joe.hershberger@ni.com> | 2019-12-09 18:47:42 +0300 |
commit | fb6038390ebe8717a66dd3a4e37bffb96e50c07a (patch) | |
tree | 853550bf224f0297f47f012c1f5fde04247d817a /doc/device-tree-bindings/net | |
parent | ee622f03ccb8108482c58b15e0126f5b97a2b062 (diff) | |
download | u-boot-fb6038390ebe8717a66dd3a4e37bffb96e50c07a.tar.xz |
dt-bindings: phy: dp83867: Add documentation for disabling clock output
Based on commit 980066e6d964 ("dt-bindings: phy: dp83867: Add documentation
for disabling clock output") of mainline linux kernel.
The clock output is generally only used for testing and development and not
used to daisy-chain PHYs. It's just a source of RF noise afterward.
Add a mux value for "off". I've added it as another enumeration to the
output property. In the actual PHY, the mux and the output enable are
independently controllable. However, it doesn't seem useful to be able
to describe the mux setting when the output is disabled.
Document that PHY's default setting will be left as is if the property
is omitted.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Diffstat (limited to 'doc/device-tree-bindings/net')
-rw-r--r-- | doc/device-tree-bindings/net/ti,dp83867.txt | 6 |
1 files changed, 4 insertions, 2 deletions
diff --git a/doc/device-tree-bindings/net/ti,dp83867.txt b/doc/device-tree-bindings/net/ti,dp83867.txt index 034146f5f8..268220964a 100644 --- a/doc/device-tree-bindings/net/ti,dp83867.txt +++ b/doc/device-tree-bindings/net/ti,dp83867.txt @@ -12,8 +12,10 @@ Required properties: compensate for the board being designed with the lanes swapped. - enet-phy-no-lane-swap - Indicates that PHY will disable swap of the TX/RX lanes. - - ti,clk-output-sel - Clock output select - see dt-bindings/net/ti-dp83867.h - for applicable values + - ti,clk-output-sel - Muxing option for CLK_OUT pin. See dt-bindings/net/ti-dp83867.h + for applicable values. The CLK_OUT pin can also + be disabled by this property. When omitted, the + PHY's default will be left as is. Default child nodes are standard Ethernet PHY device nodes as described in doc/devicetree/bindings/net/ethernet.txt |