diff options
author | Lokesh Vutla <lokeshvutla@ti.com> | 2018-08-27 13:27:51 +0300 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2018-09-11 15:32:55 +0300 |
commit | 1ad190bf5936ad87d0bd80ecf55a1ce09e9d3ae9 (patch) | |
tree | 025b2f40776d6c803ea4f896d3e3d96059e19a00 /doc/device-tree-bindings/remoteproc | |
parent | 81ae6e6d0098c9ad7d6746b4f2952a046130999c (diff) | |
download | u-boot-1ad190bf5936ad87d0bd80ecf55a1ce09e9d3ae9.tar.xz |
remoteproc: Introduce K3 system controller
K3 specific SoCs have a dedicated microcontroller for doing
resource management. Any HLOS/firmware on compute clusters should
load a firmware to this microcontroller before accessing any resource.
Adding support for loading this firmware.
After the K3 system controller got loaded with firmware and started
up it sends out a boot notification message through the secure proxy
facility using the TI SCI protocol. Intercept and receive this message
through the rproc start operation which will need to get invoked
explicitly after the firmware got loaded.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'doc/device-tree-bindings/remoteproc')
-rw-r--r-- | doc/device-tree-bindings/remoteproc/k3-system-controller.txt | 24 |
1 files changed, 24 insertions, 0 deletions
diff --git a/doc/device-tree-bindings/remoteproc/k3-system-controller.txt b/doc/device-tree-bindings/remoteproc/k3-system-controller.txt new file mode 100644 index 0000000000..32f4720b0d --- /dev/null +++ b/doc/device-tree-bindings/remoteproc/k3-system-controller.txt @@ -0,0 +1,24 @@ +Texas Instruments' K3 System Controller +========================================= + +K3 specific SoCs have a dedicated microcontroller for doing +resource management. Any HLOS/firmware on compute clusters should +load a firmware to this microcontroller before accessing any resource. +This driver communicates with ROM for loading this firmware. + +Required properties: +-------------------- +- compatible: Shall be: "ti,am654-system-controller" +- mbox-names: "tx" for Transfer channel + "rx" for Receive channel +- mboxes: Corresponding phandles to mailbox channels. + + +Example: +-------- + +system-controller: system-controller { + compatible = "ti,am654-system-controller"; + mboxes= <&secproxy 4>, <&secproxy 5>; + mbox-names = "tx", "rx"; +}; |