diff options
author | Mario Six <mario.six@gdsys.cc> | 2017-01-11 18:01:00 +0300 |
---|---|---|
committer | Stefan Roese <sr@denx.de> | 2017-02-01 11:04:18 +0300 |
commit | a1b6b0a9c1f91756b93e6d804837dc178d79d39e (patch) | |
tree | e66ce37c0d31f8ce1dac414cb470e1d2037a77f9 /doc | |
parent | 4991b4f7f1e55fed161462cefca7fe483fd3e477 (diff) | |
download | u-boot-a1b6b0a9c1f91756b93e6d804837dc178d79d39e.tar.xz |
arm: mvebu: Implement secure boot
The patch implements secure booting for the mvebu architecture.
This includes:
- The addition of secure headers and all needed signatures and keys in
mkimage
- Commands capable of writing the board's efuses to both write the
needed cryptographic data and enable the secure booting mechanism
- The creation of convenience text files containing the necessary
commands to write the efuses
The KAK and CSK keys are expected to reside in the files kwb_kak.key and
kwb_csk.key (OpenSSL 2048 bit private keys) in the top-level directory.
Signed-off-by: Reinhard Pfau <reinhard.pfau@gdsys.cc>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'doc')
-rw-r--r-- | doc/README.armada-secureboot | 373 |
1 files changed, 373 insertions, 0 deletions
diff --git a/doc/README.armada-secureboot b/doc/README.armada-secureboot new file mode 100644 index 0000000000..157cb5a231 --- /dev/null +++ b/doc/README.armada-secureboot @@ -0,0 +1,373 @@ +The trusted boot framework on Marvell Armada 38x +================================================ + +Contents: + +1. Overview of the trusted boot +2. Terminology +3. Boot image layout +4. The secured header +5. The secured boot flow +6. Usage example +7. Work to be done +8. Bibliography + +1. Overview of the trusted boot +------------------------------- + +The Armada's trusted boot framework enables the SoC to cryptographically verify +a specially prepared boot image. This can be used to establish a chain of trust +from the boot firmware all the way to the OS. + +To achieve this, the Armada SoC requires a specially prepared boot image, which +contains the relevant cryptographic data, as well as other information +pertaining to the boot process. Furthermore, a eFuse structure (a +one-time-writeable memory) need to be configured in the correct way. + +Roughly, the secure boot process works as follows: + +* Load the header block of the boot image, extract a special "root" public RSA + key from it, and verify its SHA-256 hash against a SHA-256 stored in a eFuse + field. +* Load an array of code signing public RSA keys from the header block, and + verify its RSA signature (contained in the header block as well) using the + "root" RSA key. +* Choose a code signing key, and use it to verify the header block (excluding + the key array). +* Verify the binary image's signature (contained in the header block) using the + code signing key. +* If all checks pass successfully, boot the image. + +The chain of trust is thus as follows: + +* The SHA-256 value in the eFuse field verifies the "root" public key. +* The "root" public key verifies the code signing key array. +* The selected code signing key verifies the header block and the binary image. + +In the special case of building a boot image containing U-Boot as the binary +image, which employs this trusted boot framework, the following tasks need to +be addressed: + +1. Creation of the needed cryptographic key material. +2. Creation of a conforming boot image containing the U-Boot image as binary + image. +3. Burning the necessary eFuse values. + +(1) will be addressed later, (2) will be taken care of by U-Boot's build +system (some user configuration is required, though), and for (3) the necessary +data (essentially a series of U-Boot commands to be entered at the U-Boot +command prompt) will be created by the build system as well. + +The documentation of the trusted boot mode is contained in part 1, chapter +7.2.5 in the functional specification [1], and in application note [2]. + +2. Terminology +-------------- + + CSK - Code Signing Key(s): An array of RSA key pairs, which + are used to sign and verify the secured header and the + boot loader image. + KAK - Key Authentication Key: A RSA key pair, which is used + to sign and verify the array of CSKs. + Header block - The first part of the boot image, which contains the + image's headers (also known as "headers block", "boot + header", and "image header") + eFuse - A one-time-writeable memory. + BootROM - The Armada's built-in boot firmware, which is + responsible for verifying and starting secure images. + Boot image - The complete image the SoC's boot firmware loads + (contains the header block and the binary image) + Main header - The header in the header block containing information + and data pertaining to the boot process (used for both + the regular and secured boot processes) + Binary image - The binary code payload of the boot image; in this + case the U-Boot's code (also known as "source image", + or just "image") + Secured header - The specialized header in the header block that + contains information and data pertaining to the + trusted boot (also known as "security header") + Secured boot mode - A special boot mode of the Armada SoC in which secured + images are verified (non-secure images won't boot); + the mode is activated by setting a eFuse field. + Trusted debug mode - A special mode for the trusted boot that allows + debugging of devices employing the trusted boot + framework in a secure manner (untested in the current + implementation). +Trusted boot framework - The ARMADA SoC's implementation of a secure verified + boot process. + +3. Boot image layout +-------------------- + ++-- Boot image --------------------------------------------+ +| | +| +-- Header block --------------------------------------+ | +| | Main header | | +| +------------------------------------------------------+ | +| | Secured header | | +| +------------------------------------------------------+ | +| | BIN header(s) | | +| +------------------------------------------------------+ | +| | REG header(s) | | +| +------------------------------------------------------+ | +| | Padding | | +| +------------------------------------------------------+ | +| | +| +------------------------------------------------------+ | +| | Binary image + checksum | | +| +------------------------------------------------------+ | ++----------------------------------------------------------+ + +4. The secured header +--------------------- + +For the trusted boot framework, a additional header is added to the boot image. +The following data are relevant for the secure boot: + + KAK: The KAK is contained in the secured header in the form + of a RSA-2048 public key in DER format with a length of + 524 bytes. +Header block signature: The RSA signature of the header block (excluding the + CSK array), created using the selected CSK. +Binary image signature: The RSA signature of the binary image, created using + the selected CSK. + CSK array: The array of the 16 CSKs as RSA-2048 public keys in DER + format with a length of 8384 = 16 * 524 bytes. + CSK block signature: The RSA signature of the CSK array, created using the + KAK. + +NOTE: The JTAG delay, Box ID, and Flash ID header fields do play a role in the +trusted boot process to enable and configure secure debugging, but they were +not tested in the current implementation of the trusted boot in U-Boot. + +5. The secured boot flow +------------------------ + +The steps in the boot flow that are relevant for the trusted boot framework +proceed as follows: + +1) Check if trusted boot is enabled, and perform regular boot if it is not. +2) Load the secured header, and verify its checksum. +3) Select the lowest valid CSK from CSK0 to CSK15. +4) Verify the SHA-256 hash of the KAK embedded in the secured header. +5) Verify the RSA signature of the CSK block from the secured header with the + KAK. +6) Verify the header block signature (which excludes the CSK block) from the + secured header with the selected CSK. +7) Load the binary image to the main memory and verify its checksum. +8) Verify the binary image's RSA signature from the secured header with the + selected CSK. +9) Continue the boot process as in the case of the regular boot. + +NOTE: All RSA signatures are verified according to the PKCS #1 v2.1 standard +described in [3]. + +NOTE: The Box ID and Flash ID are checked after step 6, and the trusted debug +mode may be entered there, but since this mode is untested in the current +implementation, it is not described further. + +6. Usage example +---------------- + +### Create key material + +To employ the trusted boot framework, cryptographic key material needs to be +created. In the current implementation, two keys are needed to build a valid +secured boot image: The KAK private key and a CSK private key (both have to be +2048 bit RSA keys in PEM format). Note that the usage of more than one CSK is +currently not supported. + +NOTE: Since the public key can be generated from the private key, it is +sufficient to store the private key for each key pair. + +OpenSSL can be used to generate the needed files kwb_kak.key and kwb_csk.key +(the names of these files have to be configured, see the next section on +kwbimage.cfg settings): + +openssl genrsa -out kwb_kak.key 2048 +openssl genrsa -out kwb_csk.key 2048 + +The generated files have to be placed in the U-Boot root directory. + +Alternatively, instead of copying the files, symlinks to the private keys can +be placed in the U-Boot root directory. + +WARNING: Knowledge of the KAK or CSK private key would enable an attacker to +generate secured boot images containing arbitrary code. Hence, the private keys +should be carefully guarded. + +### Create/Modifiy kwbimage.cfg + +The Kirkwook architecture in U-Boot employs a special board-specific +configuration file (kwbimage.cfg), which controls various boot image settings +that are interpreted by the BootROM, such as the boot medium. The support the +trusted boot framework, several new options were added to faciliate +configuration of the secured boot. + +The configuration file's layout has been retained, only the following new +options were added: + + KAK - The name of the KAK RSA private key file in the U-Boot + root directory, without the trailing extension of ".key". + CSK - The name of the (active) CSK RSA private key file in the + U-Boot root directory, without the trailing extension of + ".key". + BOX_ID - The BoxID to be used for trusted debugging (a integer + value). + FLASH_ID - The FlashID to be used for trusted debugging (a integer + value). + JTAG_DELAY - The JTAG delay to be used for trusted debugging (a + integer value). + CSK_INDEX - The index of the active CSK (a integer value). +SEC_SPECIALIZED_IMG - Flag to indicate whether to include the BoxID and FlashID + in the image (that is, whether to use the trusted debug + mode or not); no parameters. + SEC_BOOT_DEV - The boot device from which the trusted boot is allowed to + proceed, identified via a numeric ID. The tested values + are 0x34 = NOR flash, 0x31 = SDIO/MMC card; for + additional ID values, consult the documentation in [1]. + SEC_FUSE_DUMP - Dump the "fuse prog" commands necessary for writing the + correct eFuse values to a text file in the U-Boot root + directory. The parameter is the architecture for which to + dump the commands (currently only "a38x" is supported). + +The parameter values may be hardcoded into the file, but it is also possible to +employ a dynamic approach of creating a Autoconf-like kwbimage.cfg.in, then +reading configuration values from Kconfig options or from the board config +file, and generating the actual kwbimage.cfg from this template using Makefile +mechanisms (see board/gdsys/a38x/Makefile as an example for this approach). + +### Set config options + +To enable the generation of trusted boot images, the corresponding support +needs to be activated, and a index for the active CSK needs to be selected as +well. + +Furthermore, eFuse writing support has to be activated in order to burn the +eFuse structure's values (this option is just needed for programming the eFuse +structure; production boot images may disable it). + +ARM architecture + -> [*] Build image for trusted boot + (0) Index of active CSK + -> [*] Enable eFuse support + [ ] Fake eFuse access (dry run) + +### Build and test boot image + +The creation of the boot image is done via the usual invocation of make (with a +suitably set CROSS_COMPILE environment variable, of course). The resulting boot +image u-boot-spl.kwb can then be tested, if so desired. The hdrparser from [5] +can be used for this purpose. To build the tool, invoke make in the +'tools/marvell/doimage_mv' directory of [5], which builds a stand-alone +hdrparser executable. A test can be conducted by calling hdrparser with the +produced boot image and the following (mandatory) parameters: + +./hdrparser -k 0 -t u-boot-spl.kwb + +Here we assume that the CSK index is 0 and the boot image file resides in the +same directory (adapt accordingly if needed). The tool should report that all +checksums are valid ("GOOD"), that all signature verifications succeed +("PASSED"), and, finally, that the overall test was successful +("T E S T S U C C E E D E D" in the last line of output). + +### Burn eFuse structure + ++----------------------------------------------------------+ +| WARNING: Burning the eFuse structure is a irreversible | +| operation! Should wrong or corrupted values be used, the | +| board won't boot anymore, and recovery is likely | +| impossible! | ++----------------------------------------------------------+ + +After the build process has finished, and the SEC_FUSE_DUMP option was set in +the kwbimage.cfg was set, a text file kwb_fuses_a38x.txt should be present in +the U-Boot top-level directory. It contains all the necessary commands to set +the eFuse structure to the values needed for the used KAK digest, as well as +the CSK index, Flash ID and Box ID that were selected in kwbimage.cfg. + +Sequentially executing the commands in this file at the U-Boot command prompt +will write these values to the eFuse structure. + +If the SEC_FUSE_DUMP option was not set, the commands needed to burn the fuses +have to be crafted by hand. The needed fuse lines can be looked up in [1]; a +rough overview of the process is: + +* Burn the KAK public key hash. The hash itself can be found in the file + pub_kak_hash.txt in the U-Boot top-level directory; be careful to account for + the endianness! +* Burn the CSK selection, BoxID, and FlashID +* Enable trusted boot by burning the corresponding fuse (WARNING: this must be + the last fuse line written!) +* Lock the unused fuse lines + +The command to employ is the "fuse prog" command previously enabled by setting +the corresponding configuration option. + +For the trusted boot, the fuse prog command has a special syntax, since the +ARMADA SoC demands that whole fuse lines (64 bit values) have to be written as +a whole. The fuse prog command itself allows lists of 32 bit words to be +written at a time, but this is translated to a series of single 32 bit write +operations to the fuse line, where the individual 32 bit words are identified +by a "word" counter that is increased for each write. + +To work around this restriction, we interpret each line to have three "words" +(0-2): The first and second words are the values to be written to the fuse +line, and the third is a lock flag, which is supposed to lock the fuse line +when set to 1. Writes to the first and second words are memoized between +function calls, and the fuse line is only really written and locked (on writing +the third word) if both words were previously set, so that "incomplete" writes +are prevented. An exception to this is a single write to the third word (index +2) without previously writing neither the first nor the second word, which +locks the fuse line without setting any value; this is needed to lock the +unused fuse lines. + +As an example, to write the value 0011223344556677 to fuse line 10, we would +use the following command: + +fuse prog -y 10 0 00112233 44556677 1 + +Here 10 is the fuse line number, 0 is the index of the first word to be +written, 00112233 and 44556677 are the values to be written to the fuse line +(first and second word) and the trailing 1 is the value for the third word +responsible for locking the line. + +A "lock-only" command would look like this: + +fuse prog -y 11 2 1 + +Here 11 is the fuse number, 2 is the index of the first word to be written +(notice that we only write to word 2 here; the third word for fuse line +locking), and the 1 is the value for the word we are writing to. + +WARNING: According to application note [4], the VHV pin of the SoC must be +connected to a 1.8V source during eFuse programming, but *must* be disconnected +for normal operation. The AN [4] describes a software-controlled circuit (based +on a N-channel or P-channel FET and a free GPIO pin of the SoC) to achieve +this, but a jumper-based circuit should suffice as well. Regardless of the +chosen circuit, the issue needs to be addressed accordingly! + +7. Work to be done +------------------ + +* Add the ability to populate more than one CSK +* Test secure debug +* Test on Armada XP + +8. Bibliography +--------------- + +[1] ARMADA(R) 38x Family High-Performance Single/Dual CPU System on Chip + Functional Specification; MV-S109094-00, Rev. C; August 2, 2015, + Preliminary +[2] AN-383: ARMADA(R) 38x Families Secure Boot Mode Support; MV-S302501-00 + Rev. A; March 11, 2015, Preliminary +[3] Public-Key Cryptography Standards (PKCS) #1: RSA Cryptography + Specifications Version 2.1; February 2003; + https://www.ietf.org/rfc/rfc3447.txt +[4] AN-389: ARMADA(R) VHV Power; MV-S302545-00 Rev. B; January 28, 2016, + Released +[5] Marvell Armada 38x U-Boot support; November 25, 2015; + https://github.com/MarvellEmbeddedProcessors/u-boot-marvell + +2017-01-05, Mario Six <mario.six@gdsys.cc> |