diff options
author | Pali Rohár <pali@kernel.org> | 2023-01-22 03:25:12 +0300 |
---|---|---|
committer | Stefan Roese <sr@denx.de> | 2023-03-01 08:39:17 +0300 |
commit | c8f5009029d2e00bff45f998996a3e0a37a5aead (patch) | |
tree | 06a55d07e48b972db8cb1eb0ec2fadd8e35eb267 /doc | |
parent | fc10a926ec43250914de6fd69e4258f39c79c8aa (diff) | |
download | u-boot-c8f5009029d2e00bff45f998996a3e0a37a5aead.tar.xz |
cmd: mvebu/bubt: Add support for writing image to SATA disk
All 32-bit Armada SoCs and also 64-bit Armada 3720 SoC can load and boot
firmware from SATA disk. This adds support for updating firmware binary for
these SoCs. On 32-bit Armada SoC is firmware stored at sector 1 and on
Armada 3720 is stored at MBR partition 0x4d or GPT partition with type GUID
6828311A-BA55-42A4-BCDE-A89BB5EDECAE (Marvell Armada 3700 Boot partition).
Signed-off-by: Pali Rohár <pali@kernel.org>
Diffstat (limited to 'doc')
-rw-r--r-- | doc/mvebu/cmd/bubt.txt | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/doc/mvebu/cmd/bubt.txt b/doc/mvebu/cmd/bubt.txt index 1fe1f07dd1..515e4fb1b0 100644 --- a/doc/mvebu/cmd/bubt.txt +++ b/doc/mvebu/cmd/bubt.txt @@ -5,7 +5,7 @@ Bubt command is used to burn a new ATF image to flash device. The bubt command gets the following parameters: ATF file name, destination device and source device. bubt [file-name] [destination [source]] - file-name Image file name to burn. default = flash-image.bin - - destination Flash to burn to [spi, nand, mmc]. default = active flash + - destination Flash to burn to [spi, nand, mmc, sata]. default = active flash - source Source to load image from [tftp, usb]. default = tftp Examples: |