diff options
author | Sean Anderson <seanga2@gmail.com> | 2020-10-28 02:55:41 +0300 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2020-10-30 18:00:13 +0300 |
commit | 8ba0f89abe6f60802da7ff5f630f16a9fbc27df2 (patch) | |
tree | 67d7bdff892fae5f81ead9fa0487e406b2ca55e9 /doc | |
parent | 00ebb7feb78614b28d46511ebc2eb76967c20efc (diff) | |
download | u-boot-8ba0f89abe6f60802da7ff5f630f16a9fbc27df2.tar.xz |
doc: Update logging documentation
This updates logging documentation with some examples of the new commands
added in the previous commits. It also removes some items from the to-do
list which have been implemented.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Diffstat (limited to 'doc')
-rw-r--r-- | doc/develop/logging.rst | 221 |
1 files changed, 107 insertions, 114 deletions
diff --git a/doc/develop/logging.rst b/doc/develop/logging.rst index 409dbcadd2..7fdd1132ef 100644 --- a/doc/develop/logging.rst +++ b/doc/develop/logging.rst @@ -21,26 +21,13 @@ is visible from the basic console output. U-Boot's logging feature aims to satisfy this goal for both users and developers. - Logging levels -------------- -There are a number logging levels available, in increasing order of verbosity: - -* LOGL_EMERG - Printed before U-Boot halts -* LOGL_ALERT - Indicates action must be taken immediate or U-Boot will crash -* LOGL_CRIT - Indicates a critical error that will cause boot failure -* LOGL_ERR - Indicates an error that may cause boot failure -* LOGL_WARNING - Warning about an unexpected condition -* LOGL_NOTE - Important information about progress -* LOGL_INFO - Information about normal boot progress -* LOGL_DEBUG - Debug information (useful for debugging a driver or subsystem) -* LOGL_DEBUG_CONTENT - Debug message showing full message content -* LOGL_DEBUG_IO - Debug message showing hardware I/O access +There are a number logging levels available. -To continue a log message in a separate call of function log() use - -* LOGL_CONT - Use same log level as in previous call +.. kernel-doc:: include/log.h + :identifiers: log_level_t Logging category ---------------- @@ -49,19 +36,8 @@ Logging can come from a wide variety of places within U-Boot. Each log message has a category which is intended to allow messages to be filtered according to their source. -The following main categories are defined: - -* LOGC_NONE - Unknown category (e.g. a debug() statement) -* UCLASS\_... - Related to a particular uclass (e.g. UCLASS_USB) -* LOGC_ARCH - Related to architecture-specific code -* LOGC_BOARD - Related to board-specific code -* LOGC_CORE - Related to core driver-model support -* LOGC_DT - Related to device tree control -* LOGC_EFI - Related to EFI implementation - -To continue a log message in a separate call of function log() use - -* LOGC_CONT - Use same category as in previous call +.. kernel-doc:: include/log.h + :identifiers: log_category_t Enabling logging ---------------- @@ -78,7 +54,6 @@ If CONFIG_LOG is not set, then no logging will be available. The above have SPL and TPL versions also, e.g. CONFIG_SPL_LOG_MAX_LEVEL and CONFIG_TPL_LOG_MAX_LEVEL. - Temporary logging within a single file -------------------------------------- @@ -89,12 +64,52 @@ Sometimes it is useful to turn on logging just in one file. You can use this #define LOG_DEBUG to enable building in of all logging statements in a single file. Put it at -the top of the file, before any #includes. This overrides any log-level setting -in U-Boot, including CONFIG_LOG_DEFAULT_LEVEL, but just for that file. +the top of the file, before any #includes. + +To actually get U-Boot to output this you need to also set the default logging +level - e.g. set CONFIG_LOG_DEFAULT_LEVEL to 7 (:c:type:`LOGL_DEBUG`) or more. +Otherwise debug output is suppressed and will not be generated. + +Using DEBUG +----------- + +U-Boot has traditionally used a #define called DEBUG to enable debugging on a +file-by-file basis. The debug() macro compiles to a printf() statement if +DEBUG is enabled, and an empty statement if not. + +With logging enabled, debug() statements are interpreted as logging output +with a level of LOGL_DEBUG and a category of LOGC_NONE. + +The logging facilities are intended to replace DEBUG, but if DEBUG is defined +at the top of a file, then it takes precedence. This means that debug() +statements will result in output to the console and this output will not be +logged. + +Logging statements +------------------ + +The main logging function is: + +.. code-block:: c + log(category, level, format_string, ...) + +Also debug() and error() will generate log records - these use LOG_CATEGORY +as the category, so you should #define this right at the top of the source +file to ensure the category is correct. + +You can also define CONFIG_LOG_ERROR_RETURN to enable the log_ret() macro. This +can be used whenever your function returns an error value: + +.. code-block:: c + + return log_ret(uclass_first_device(UCLASS_MMC, &dev)); + +This will write a log record when an error code is detected (a value < 0). This +can make it easier to trace errors that are generated deep in the call stack. Convenience functions ---------------------- +~~~~~~~~~~~~~~~~~~~~~ A number of convenience functions are available to shorten the code needed for logging: @@ -122,36 +137,6 @@ or Remember that all uclasses IDs are log categories too. - -Log command ------------ - -The 'log' command provides access to several features: - -* level - access the default log level -* format - access the console log format -* rec - output a log record -* test - run tests - -Type 'help log' for details. - - -Using DEBUG ------------ - -U-Boot has traditionally used a #define called DEBUG to enable debugging on a -file-by-file basis. The debug() macro compiles to a printf() statement if -DEBUG is enabled, and an empty statement if not. - -With logging enabled, debug() statements are interpreted as logging output -with a level of LOGL_DEBUG and a category of LOGC_NONE. - -The logging facilities are intended to replace DEBUG, but if DEBUG is defined -at the top of a file, then it takes precedence. This means that debug() -statements will result in output to the console and this output will not be -logged. - - Logging destinations -------------------- @@ -165,60 +150,84 @@ enabled or disabled independently: The syslog driver sends the value of environmental variable 'log_hostname' as HOSTNAME if available. - -Log format ----------- - -You can control the log format using the 'log format' command. The basic -format is:: - - LEVEL.category,file.c:123-func() message - -In the above, file.c:123 is the filename where the log record was generated and -func() is the function name. By default ('log format default') only the -function name and message are displayed on the console. You can control which -fields are present, but not the field order. - - Filters ------- -Filters are attached to log drivers to control what those drivers emit. Only -records that pass through the filter make it to the driver. +Filters are attached to log drivers to control what those drivers emit. FIlters +can either allow or deny a log message when they match it. Only records which +are allowed by a filter make it to the driver. Filters can be based on several criteria: -* maximum log level +* minimum or maximum log level * in a set of categories * in a set of files If no filters are attached to a driver then a default filter is used, which limits output to records with a level less than CONFIG_MAX_LOG_LEVEL. +Log command +----------- -Logging statements ------------------- +The 'log' command provides access to several features: -The main logging function is: +* level - list log levels or set the default log level +* categories - list log categories +* drivers - list log drivers +* filter-list - list filters +* filter-add - add a new filter +* filter-remove - remove filters +* format - access the console log format +* rec - output a log record -.. code-block:: c +Type 'help log' for details. - log(category, level, format_string, ...) +Log format +~~~~~~~~~~ -Also debug() and error() will generate log records - these use LOG_CATEGORY -as the category, so you should #define this right at the top of the source -file to ensure the category is correct. +You can control the log format using the 'log format' command. The basic +format is:: -You can also define CONFIG_LOG_ERROR_RETURN to enable the log_ret() macro. This -can be used whenever your function returns an error value: + LEVEL.category,file.c:123-func() message -.. code-block:: c +In the above, file.c:123 is the filename where the log record was generated and +func() is the function name. By default ('log format default') only the message +is displayed on the console. You can control which fields are present, but not +the field order. - return log_ret(uclass_first_device(UCLASS_MMC, &dev)); +Adding Filters +~~~~~~~~~~~~~~ -This will write a log record when an error code is detected (a value < 0). This -can make it easier to trace errors that are generated deep in the call stack. +To add new filters at runtime, use the 'log filter-add' command. For example, to +suppress messages from the SPI and MMC subsystems, run:: + + log filter-add -D -c spi -c mmc +You will also need to add another filter to allow other messages (because the +default filter no longer applies):: + + log filter-add -A -l info + +Log levels may be either symbolic names (like above) or numbers. For example, to +disable all debug and above (log level 7) messages from ``drivers/core/lists.c`` +and ``drivers/core/ofnode.c``, run:: + + log filter-add -D -f drivers/core/lists.c,drivers/core/ofnode.c -L 7 + +To view active filters, use the 'log filter-list' command. Some example output +is:: + + => log filter-list + num policy level categories files + 2 deny >= DEBUG drivers/core/lists.c,drivers/core/ofnode.c + 0 deny <= IO spi + mmc + 1 allow <= INFO + +Note that filters are processed in-order from top to bottom, not in the order of +their filter number. Filters are added to the top of the list if they deny when +they match, and to the bottom if they allow when they match. For more +information, consult the usage of the 'log' command, by running 'help log'. Code size --------- @@ -235,13 +244,12 @@ The last option turns every debug() statement into a logging call, which bloats the code hugely. The advantage is that it is then possible to enable all logging within U-Boot. - To Do ----- There are lots of useful additions that could be made. None of the below is -implemented! If you do one, please add a test in test/py/tests/test_log.py - +implemented! If you do one, please add a test in test/log/log_test.c +log filter-add -D -f drivers/core/lists.c,drivers/core/ofnode.c -l 6 Convenience functions to support setting the category: * log_arch(level, format_string, ...) - category LOGC_ARCH @@ -262,25 +270,15 @@ Convert error() statements in the code to log() statements Figure out what to do with BUG(), BUG_ON() and warn_non_spl() -Figure out what to do with assert() - Add a way to browse log records Add a way to record log records for browsing using an external tool -Add commands to add and remove filters - Add commands to add and remove log devices Allow sharing of printf format strings in log records to reduce storage size for large numbers of log records -Add a command-line option to sandbox to set the default logging level - -Convert core driver model code to use logging - -Convert uclasses to use logging with the correct category - Consider making log() calls emit an automatic newline, perhaps with a logn() function to avoid that @@ -291,12 +289,7 @@ number dropped due to them being generated before the log system was ready. Add a printf() format string pragma so that log statements are checked properly -Enhance the log console driver to show level / category / file / line -information - -Add a command to add new log records and delete existing records. - -Provide additional log() functions - e.g. logc() to specify the category +Add a command to delete existing log records. Logging API ----------- |