diff options
author | Peng Fan <peng.fan@nxp.com> | 2020-10-14 12:12:10 +0300 |
---|---|---|
committer | Stefano Babic <sbabic@denx.de> | 2020-11-01 17:37:19 +0300 |
commit | 9a1b96f1d8b69dc004458603aea2e807d1a6cf19 (patch) | |
tree | 1551ff6f037a0c62a1c239923e84e833923ff316 /doc | |
parent | 20337b75a784847da4cb85731c866de44b563fe8 (diff) | |
download | u-boot-9a1b96f1d8b69dc004458603aea2e807d1a6cf19.tar.xz |
doc: board: Convert i.MX6ULL EVK README to reST
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Diffstat (limited to 'doc')
-rw-r--r-- | doc/board/freescale/index.rst | 1 | ||||
-rw-r--r-- | doc/board/freescale/mx6ullevk.rst | 47 |
2 files changed, 48 insertions, 0 deletions
diff --git a/doc/board/freescale/index.rst b/doc/board/freescale/index.rst index 046a839a52..313cf409a6 100644 --- a/doc/board/freescale/index.rst +++ b/doc/board/freescale/index.rst @@ -17,3 +17,4 @@ Freescale mx6sabreauto mx6sabresd mx6ul_14x14_evk + mx6ullevk diff --git a/doc/board/freescale/mx6ullevk.rst b/doc/board/freescale/mx6ullevk.rst new file mode 100644 index 0000000000..a26248a1e3 --- /dev/null +++ b/doc/board/freescale/mx6ullevk.rst @@ -0,0 +1,47 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +mx6ullevk +========= + +How to use U-Boot on Freescale MX6ULL 14x14 EVK +----------------------------------------------- + +- First make sure you have installed the dtc package (device tree compiler): + +.. code-block:: bash + + $ sudo apt-get install device-tree-compiler + +- Build U-Boot for MX6ULL 14x14 EVK: + +.. code-block:: bash + + $ make mrproper + $ make mx6ull_14x14_evk_defconfig + $ make + +This generates the u-boot-dtb.imx image in the current directory. + +- Flash the u-boot-dtb.imx image into the micro SD card: + +.. code-block:: bash + + $ sudo dd if=u-boot-dtb.imx of=/dev/sdb bs=1K seek=1 conv=notrunc && sync + +- Jumper settings:: + + SW601: 0 0 1 0 + Sw602: 1 0 + +Where 0 means bottom position and 1 means top position (from the switch label +numbers reference). + +Connect the USB cable between the EVK and the PC for the console. +(The USB console connector is the one close the push buttons) + +Insert the micro SD card in the board, power it up and U-Boot messages should +come up. + +The link for the board: http://www.nxp.com/products/microcontrollers-and- \ +processors/arm-processors/i.mx-applications-processors/i.mx-6-processors/ \ +i.mx6qp/evaluation-kit-for-the-i.mx-6ull-applications-processor:MCIMX6ULL-EVK |